Tripp Lite SRFANWM Handleiding

Tripp Lite Hardwarekoeling SRFANWM

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite SRFANWM (2 pagina's) in de categorie Hardwarekoeling. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Assembly Instructions

SRFANWM

Wall-Mount Enclosure Cooling Solution

Recommended Installation

Fans mounted inside the Wall-Mount cabinet draw air out of the cabinet to provide proper equipment cooling.

1 Mount the SRFANWM over the vents inside

the Wall-Mount cabinet using the supplied

hardware, with airﬂow arrows and label facing

toward the top of the cabinet.

3 Secure the wire between each fan to the

cabinet using the peel-and-stick cable anchor

with tie.

See Reverse for Alternative

Installation Option

2 Mount the shroud casing over the fans using the supplied

hardware.

4 Plug the SRFANWM input cable into a power source, such as

an internal PDU. For external power connection, utilize the

removable cable access panel.

1111 W. 35th Street • Chicago, IL 60609 USA

www.tripplite.com/support

Assembly Instructions

SRFANWM

Wall-Mount Enclosure Cooling Solution

Alternative Installation

Fans mounted outside the Wall-Mount cabinet draw air out of the cabinet for proper equipment cooling.

1 For external installation, begin by

installing the fan into the shroud using

the supplied hardware.

4 Plug the SRFANWM input cable into

a power source, such as an external

source. For connection to an internal

PDU, utilize the removable cable access

panel.

2 Mount the assembly over the vents on

the exterior of the Wall-Mount cabinet,

threading the screws from the inside of

the cabinet.

3 Secure the wire between each fan to

the cabinet using the peel-and-stick

cable anchor with tie.

2 3

201105092 93-3111

1111 W. 35th Street • Chicago, IL 60609 USA

www.tripplite.com/support

SAVE THESE

INSTRUCTIONS

This manual contains instructions and warnings that must be followed during the installation and

operation of the product described in this manual. Read all instructions and warnings thoroughly

before attempting installation. Failure to comply may affect the warranty and cause property damage

and personal injury.

• Install in a controlled indoor environment, away from moisture, temperature extremes, ammable

liquids and gasses, conductive contaminants, dust and direct sunlight.

• Inspect the shipping container and the unit for shipping damage. Do not use the unit if it is damaged.

• Connect the unit to an outlet that is provided with appropriate overcurrent protection.

• When using tools, use eye protection and follow all other safety precautions recommended by the

tool manufacturer and required by applicable regulations.

• Keep hair, clothing and loose objects away from the fan intakes. There is a risk of property

damage and personal injury.

• Do not block, cover or insert objects into the openings of the unit.

• Use of this equipment in life support applications where failure of this equipment can reasonably

be expected to cause failure of the life support equipment or to signiﬁcantly affect its safety or

effectiveness is not recommended. Do not use this equipment in the presence of a ﬂammable

anesthetic mixture with air, oxygen or nitrous oxide.

Product specificaties

Merk:	Tripp Lite
Categorie:	Hardwarekoeling
Model:	SRFANWM
Kleur van het product:	Zwart
Breedte:	132.1 mm
Diepte:	41 mm
Hoogte:	132.1 mm
Gewicht verpakking:	2300 g
Breedte verpakking:	198.1 mm
Diepte verpakking:	296.2 mm
Hoogte verpakking:	78.7 mm
Land van herkomst:	China
Aantal ventilatoren:	2 ventilator(en)
(Buitenste) hoofdverpakking hoogte:	223.5 mm
(Buitenste) hoofdverpakking breedte:	525.8 mm
(Buitenste) hoofdverpakking brutogewicht:	22820 g
(Buitenste) hoofdverpakking lengte:	617.2 mm
Hoeveelheid per (buitenste) hoofdverpakking:	12 stuk(s)
Code geharmoniseerd systeem (HS):	8414.59.1500
GTIN (EAN/UPC)-nummer (buitenste) hoofdverpakking:	10037332166613
Ventilator performance:	210 cfm