Tripp Lite SmartPro SMART700HGL Handleiding

Tripp Lite UPS SmartPro SMART700HGL

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite SmartPro SMART700HGL (44 pagina's) in de categorie UPS. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/44

Owner’s Manual

SmartPro®

Medical-Grade UPS Systems

(with Lithium Iron Phosphate Batteries)

Models:

Important Safety Instructions 2

Package Contents 5

Connecting the Batteries 6

Quick Installation 7

Basic Operation 9

Guidance and Manufacturer’s Declaration 12

Storage and Service 13

Regulatory Compliance and 14

Product Registration

Español 15

Français 30

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

SMART700HGL

(Series Number: AG-8863)

SMART1200XLHGL

(Series Number: AG-8862)

PROTECT YOUR INVESTMENT!

and ultimate peace of mind.

You could also win an

ISOBAR6ULTRA surge protector—

a $100 value!

www.tripplite.com/warranty

16-07-004-933608.indb 1 8/31/2016 9:59:30 AM

Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that should be followed during the installation,

operation and storage of all Tripp Lite UPS Systems. Failure to heed these warnings may affect

your warranty.

Statement of Intended Use

Tripp Lite Medical-Grade UPS Systems are intended to support and protect non-medical and

medical computer equipment and medical devices that require leakage current reduction, surge

protection, voltage regulation, line noise ﬁltering and battery backup during power outages and

generator testing, both inside and outside patient care areas. Tripp Lite Medical-Grade UPS Systems

come with hospital-grade plugs and receptacles that reduce leakage to below 100μA.

Product Information

SMART700HGL SMART1200XLHGL

AC Input Voltage 120 120

AC Input Voltage Range 81–143 81–143

Input Amp(s) 5.5 9.2

Output Amp 5.8 6.25

Rated Power (VA/Watts) 700VA/450W 1000VA/750W

Frequency 60 Hz 60 Hz

No. of Phases Single Single

Class Type Class I Class I

Plug/Connector Type NEMA 5-15P NEMA 5-15P

Operation Continuous Continuous

AC Input Protection (Qty./type/rating) Input breaker

(2 x 10A), thermal

Input breaker

(2 x 15A), thermal

Max Leakage Current (uA) Less than 100uA Less than 100uA

Weight 33.7 lb. (15.3 kg) 33.6 lb. (15.2 kg)

Known Contraindication None None

UPS Location Warnings

Relevant Symbols

Denotes that information in the manual should be reviewed before use.

Used to signal a warning that a statement is particularly important and could pose a safety

risk.

Warning—Dangerous Voltage No sitting

Denotes general warning sign No stepping on surface

Refer to Instruction Manual/Booklet No pushing

16-07-004-933608.indb 2 8/31/2016 9:59:31 AM

Important Safety Instructions continued

• Do not use this equipment within oxygen-enriched atmospheres, or within 1 ft. (0.3 m) of a point

at which an oxygen-enriched atmosphere is intentionally vented.

• Use caution when lifting UPS. Because of the considerable weight of all UPS systems, at least

two people should assist in lifting and installing them.

• Install the UPS indoors, away from excess moisture or heat, dust or direct sunlight.

• For best performance, the UPS should be used in a location that meets the following conditions:

Temperature: 32 to 104° F (0 to 40° C); Humidity: 0 to 95% (non-condensing);

Elevation: <6,562 ft. (2,000 m) above sea level.

• Leave adequate space around all sides of the UPS for proper ventilation. Do not obstruct its vents

or fan openings.

• Do not mount unit with its front or rear panel facing down (at any angle). Mounting in this manner

will seriously inhibit the unit’s internal cooling, eventually causing product damage not covered

under warranty.

• UPS is not intended for patient contact. Avoid installation that will cause accidental patient

contact.

UPS Connection Warnings

• The UPS contains its own energy source (battery). The output terminals may be live even when

the UPS is not connected to an AC supply.

• Connect the UPS to a properly grounded AC power outlet. Do not modify the UPS plug in a

way that would eliminate its connection to ground. Do not use adapters that eliminate the UPS

connection to ground.

• Do not plug the UPS into itself; this will damage the UPS and void your warranty.

• If connecting the UPS to a motor-powered AC generator, the generator must provide ﬁltered,

frequency-regulated output.

• To remove the UPS from the supply mains, the plug serves as a disconnect device.

• Once connected, do not limit access to the input plug. The plug must be accessible to be used as

a means of disconnection.

• When connecting the UPS to a power outlet, ensure the power outlet is provided with suitable

overcurrent protection in accordance with national and local electrical codes. Ensure the

overcurrent protection has a minimum of 1500A breaking capacity.

CAUTION: Do not remove cover for 5 minutes after disconnecting all sources of

supply. Risk of electric shock—hazardous live parts inside. Do not remove cover.

No user serviceable parts inside. Refer servicing to qualiﬁed service personnel.

This UPS receives power from more DC sources; disconnection of the AC and DC

source is required to de-energize the unit before servicing.

CAUTION: To ensure proper grounding with supply mains power, the input cord must

be connected with an approved country-speciﬁc plug with a protective earth ground

connection.

CAUTION: If this product is operated on battery (not connected to mains power),

adequate safeguards should be employed to protect against accidental contact

with AC power conductors.

CAUTION: Do not exceed total rated output.

WARNING: No modiﬁcation of this equipment is allowed.

16-07-004-933608.indb 3 8/31/2016 9:59:31 AM

Product specificaties

Merk:	Tripp Lite
Categorie:	UPS
Model:	SmartPro SMART700HGL
Kleur van het product:	Wit
Gewicht:	14260 g
Breedte:	230.1 mm
Diepte:	190.5 mm
Hoogte:	323.1 mm
Gewicht verpakking:	16070 g
Breedte verpakking:	305.1 mm
Diepte verpakking:	344.9 mm
Hoogte verpakking:	435.1 mm
LED-indicatoren:	Ja
Vormfactor:	Tower
USB-poort:	Ja
Land van herkomst:	China
Accu/Batterij voltage:	36 V
Ondersteund aantal accu's/batterijen:	1
Duurzaamheidscertificaten:	RoHS
Uitgangsvermogen:	450 W
Temperatuur bij opslag:	-15 - 50 °C
Frequentie:	- Hz
Power factor:	0.6
Seriële poort(en):	1
(Buitenste) hoofdverpakking hoogte:	435.1 mm
(Buitenste) hoofdverpakking breedte:	305.1 mm
(Buitenste) hoofdverpakking brutogewicht:	16070 g
(Buitenste) hoofdverpakking lengte:	344.9 mm
Hoeveelheid per (buitenste) hoofdverpakking:	1 stuk(s)
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 95 procent
Batterijtechnologie:	Lithium-ijzerfosfaat (LiFePo4)
Surge energy rating:	480 J
Aantal AC uitgangen:	4 AC-uitgang(en)
Stopcontacttypes:	NEMA 5–15R
Stroom (max.):	10 A
Output power capacity:	0.7 kVA
Ingang operation voltage (min):	- V
Ingang operation voltage (max):	- V
Uitgang operation voltage (min):	115 V
Uitgang operation voltage (max):	120 V
UPS-topologie:	Line-interactive
Typische backup tijd op halve lading:	42 min
Typische backup tijd op volledige lading:	18 min
Hot-swap batterij:	Ja
Seriële interface:	Ja
Automatic Voltage Regulation (AVR):	Ja