Apc AP9922 Handleiding

Apc UPS AP9922

Lees hieronder de 📖 handleiding in het Nederlandse voor Apc AP9922 (3 pagina's) in de categorie UPS. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

Network Management Card 2 (NMC 2) Firmware v7.1.2 for

AP9922 Battery Manager Release Notes

Table of Contents

Affected Revision Levels .................................................................................................................................................. 1

Schneider Electric Network Management Device IP Configuration Wizard ....................................................................... 1

New Features ................................................................................................................................................................... 2

Fixed Issues ...................................................................................................................................................................... 2

Known Issues ................................................................................................................................................................... 3

Miscellaneous ................................................................................................................................................................... 3

Hash Signatures ............................................................................................................................................................... 3

Affected Revision Levels

Compon nte File Det sail

APC Operating System apc_hw05_aos_712.bin Network Management Card Operating System &

TCP/IP Stack

AP9922 Battery Manager apc_hw05_BM4_712.bin Application for AP9922 Battery Manager

For details on upgrading the UPS firmware, see the User Guide.

Schneider Electric Network Management Device IP Configuration Wizard

The Device IP Configuration Wizard is a Windows application designed specifically to remotely configure the basic

TCP/IP settings of Network Management Cards. The Wizard runs on Windows® Server 2012, Windows Server 2016,

Windows Server 2019, Windows 8.1, and Windows 10. This utility is for IPv4 only.

NOTES:

•In firmware version v1.4.x and higher, it is not supported to assign IP addresses to Network Management

Cards using the Wizard.

•You cannot search for assigned devices already on the network using an IP range unless you enable

SNMPv1 and set the to “public”. For more information on SNMPv1, see the

Community Name User Guide.

•When the NMC IP address settings are configured, to access the NMC Web UI in a browser, you must

update the URL from http to https.

The Wizard is available as a free download from the APC website:

1. Go to and click Software & Firmware Show More from the list of checkboxes in Filter by > Software /

Firmware.

2. Select Wizards and Configurators to view the list of utilities available for download.

3. C lick the Download button to download the Device IP Configuration Wizard.

New Features

New Feature

AP9922 Battery Manager has been updated with the latest aos version 7.1.2.

Fixed Issues

Fixed Issue

Security Vulnerabilities

•CWE-16: Configuration – The vulnerabilites in this category during the configuration of the software are

now resolved.

•Cipher Block Chaining (CBC) – Support has been removed as it does not meet modern cryptographic

needs, and contains cybersecurity vulnerabilities.

•CWE-834: – TExcessive Iteration he software performs an iteration or loop and now s sufficiently limiti the

number of times that the loop is executed.

•CWE-79: - – Improper Neutralization of Input During Web Page Generation ('Cross site Scripting') The

software now correctly neutralizes the user controllable input before it is placed in a web page output-

served to other users.

•CWE-425: – s Direct Request ('Forced Browsing') The web application now enforce appropriate

authorization on all restricted URLs, scripts, or files.

•CWE-327: Use of a Broken or Risky Cryptographic Algorithm: This software no longer uses a vulnerable

cryptographic algorithm or protocol.

Cybersecurity Vulnerabilities

The following third part components have been updated to address cybersecurity vulnerabilities.-

•SSH Server provided by Cryptlib - -CVE 2008 5- 161

•TCP/IP provided by Treck - CVE- -2004 0230

•TCP/IP provided by Treck - - -CVE 2004 0790

•Treck stack - - -CVE 2012 5364

•CWE-200: Exposure of Sensitive Information to an Unauthorized Actor

•JQuery - - -CVE 2019 11358

Known Issues

Known Issue

There are no known issues in this release.

Miscellaneous

Recovering from a Lost Password

See the User Guide on the APC website for instructions on how to recover from a lost password.

Event Support List

To obtain the event names and event codes for all events supported by a currently connected APC device, first

retrieve the config.ini file from the attached NMC. To use SCP to retrieve config.ini from a configured NMC:

1. Open a connection to the NMC, using its IP Address:

scp <admin_username>@<ip_address>:config.ini <filename_to_be_stored>

2. Log on using the Administrator user name and password

3. Retrieve the config.ini file containing the settings of the NMC of the UPS:

ftp > get config.ini

The file is written to the folder from which you launched SCP.

In the file, find the section heading [EventActionConfig]. In the list of events under that config.ini

sectionheading, substitute 0x for the initial E in the code for any event to obtain the hexadecimal event

codeshown in the user interface and in the documentation. For example, the hexadecimal code for the

codeE0033 in the file (for the event "System: Configuration change") is 0x0033.config.ini

PowerNet MIB Reference Guide

NOTE: The MIB Reference Guide on the APC website explains the structure of the MIB, types of OIDs, and the

procedure for defining SNMP trap receivers. For information on specific OIDs, use a MIB browser to view their

definitions and available values directly from the MIB itself. You can view the definitions of traps at the end of the MIB

itself (the file powernet442.mib on the APC website).

Hash Signatures

Signatures apc_hw05_BM4_712.bin

MD5 b2f4d520b252bb01263a30c25983f99b

SHA-1 695da9c6569d51f81983e7c1554b4ca46d23ee44

SHA- 256 55ed660a3f9141574d3ac9cee4f65426f738ed8ab4d987df4d82b68e5ccaea6d

https://www.apc.com

990 3188E–

04 2024-

Product specificaties

Merk:	Apc
Categorie:	UPS
Model:	AP9922
Kleur van het product:	Zwart
Ingebouwd display:	Nee
Gewicht:	6240 g
Breedte:	432 mm
Diepte:	432 mm
Hoogte:	43 mm
Gewicht verpakking:	10770 g
Breedte verpakking:	579 mm
Diepte verpakking:	554 mm
Hoogte verpakking:	89 mm
LED-indicatoren:	Ja
Certificering:	cUL Listed, CE, EN 55024, FCC Part 15 Class B, UL Listed, VDE\nREACH
Duurzaamheidscertificaten:	RoHS
Temperatuur bij opslag:	-25 - 65 °C
Luchtvochtigheid bij opslag:	0 - 95 procent
Hoogte, in bedrijf:	0 - 3000 m
Hoogte bij opslag:	0 - 9000 m
Rackcapaciteit:	1U
Bedrijfstemperatuur (T-T):	-5 - 45 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 95 procent
Syslog:	Ja