Tripp Lite SmartPro SMART1050TSU Handleiding

Tripp Lite UPS SmartPro SMART1050TSU

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite SmartPro SMART1050TSU (36 pagina's) in de categorie UPS. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/36

UPS Systems

Models:

SMART750TSU, SMART1050TSU

(Series Numbers: AG-888F, AG-8890)

Owner’s Manual

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Español 13 • Français 25

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $100 value!

www.tripplite.com/warranty

18-12-064-933901.indb 1 1/9/2019 5:01:22 PM

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that should be followed during the

installation, operation, maintenance and storage of the UPS and batteries. Failure

to heed these warnings may affect the warranty.

UPS Location Warnings

• Install your UPS indoors, away from excess moisture or heat, conductive contaminants, dust

or direct sunlight.

• For best performance, keep the indoor temperature between 32º F and 104º F

(0º C and 40º C).

• Leave adequate space around all sides of the UPS for proper ventilation.

• Only set the UPS upright on a sturdy ﬂat surface. Do not block fans or ventilation holes, as

this will seriously inhibit the unit's internal cooling and cause product damage not covered

under warranty.

UPS Connection Warnings

• Connect your UPS directly to a properly-grounded AC power outlet. Do not plug the UPS into

itself; this will damage the UPS.

• Do not modify the UPS plug, and do not use an adapter that would eliminate the UPS

ground connection.

• Do not use extension cords to connect the UPS to an AC outlet.

• If the UPS receives power from a motor-powered AC generator, the generator must provide

clean, ﬁltered, computer-grade output.

• The mains socket outlet that supplies the UPS should be easily accessible and located near

the UPS.

Equipment Connection Warnings

Install in accordance with National Electrical Code standards ANSI/NFPA

70 and Canadian Electrical Code, Part I, C22.1.

Short-circuit backup protection and overcurrent protection is provided by

the building installation.

To reduce the risk of ﬁre, connect only to a circuit provided branch circuit

overcurrent protection in accordance with the National Electrical Code,

ANSI/NFPA 70 and the Canadian Electrical Code, Part I, C22.1. The plug on

the power supply cord is intended to serve as the disconnect device. Be

sure that the socket-outlet is installed near the equipment and is made

easily accessible.

Important Safety Instructions

18-12-064-933901.indb 2 1/9/2019 5:01:23 PM

Important Safety Instructions

• Use of this equipment in life support applications where failure of this equipment can

reasonably be expected to cause the failure of the life support equipment or to signiﬁcantly

affect its safety or effectiveness is not recommended.

• Do not connect surge protectors or extension cords to the output of your UPS. This might

damage the UPS and may affect the surge protector and UPS warranties.

• Connect the UPS to an outlet that is adequately protected against excess currents, short

circuits and earth faults as part of the building installation.

Battery Warnings

• Batteries can present a risk of electrical shock and burn from high short-circuit current.

Observe proper precautions. There are no user-serviceable parts inside the UPS. Do not

open the UPS except to perform battery replacement. Do not open batteries. Do not

short or bridge the battery terminals with any object. Do not dispose of batteries in a ﬁre.

The batteries may explode. Released material is harmful to the skin and eyes. It may be

toxic. Unplug and turn off the UPS before performing battery replacement. Use tools with

insulated handles. Battery replacement should be performed only by authorized service

personnel using the same number and type of batteries (sealed lead-acid). Do not dispose

of the batteries in a ﬁre. Tripp Lite offers a complete line of UPS System Replacement

Battery Cartridges (R.B.C.).Visit Tripp Lite on the Web at www.tripplite.com/products/battery-

ﬁnder to locate the speciﬁc replacement battery for your UPS.

CAUTION: A battery can present a risk of electrical shock and high short-

circuit current. Contact with any part of a grounded battery can result in

electrical shock. The following precautions should be observed when working

on batteries:

• Remove watches, rings or other metal objects.

• Use tools with insulated handles.

• Wear rubber gloves and boots.

• Do not lay tools or metal parts on top of batteries.

• Disconnect charging source and load prior to installing or maintaining the battery.

• Remove battery grounds during installation and maintenance to reduce likelihood

of shock.

• Remove the connection from ground if any part of the battery is determined to be

grounded.

UPS and Battery Recycling

Tripp Lite products use sealed lead-acid batteries, which are highly recyclable.

Call Tripp Lite at 1.773.869.1234 or visit www.tripplite.com/support/recycling-

program for more information on recycling the batteries or any other Tripp Lite

product. Please refer to local codes for disposal requirements.

18-12-064-933901.indb 3 1/9/2019 5:01:23 PM

Product specificaties

Merk:	Tripp Lite
Categorie:	UPS
Model:	SmartPro SMART1050TSU
Kleur van het product:	Zwart
Gewicht:	10480 g
Breedte:	139.7 mm
Diepte:	381 mm
Hoogte:	190.5 mm
Snoerlengte:	1.5 m
Gewicht verpakking:	11020 g
Breedte verpakking:	236.2 mm
Diepte verpakking:	495.3 mm
Hoogte verpakking:	297.2 mm
Gebruikershandleiding:	Ja
Materiaal behuizing:	Acrylonitrielbutadieenstyreen (ABS)
LED-indicatoren:	Ja
Vormfactor:	Tower
Meegeleverde kabels:	RS-232, USB cable
Ingebouwde ventilator:	Ja
Land van herkomst:	Vietnam
Geluidsalarm(en):	Ja
Uitgangsvermogen:	900 W
Temperatuur bij opslag:	-15 - 45 °C
Frequentie:	50/60 Hz
Luchtvochtigheid bij opslag:	0 - 90 procent
Power factor:	0.86
Type koeling:	Actief
(Buitenste) hoofdverpakking hoogte:	297.2 mm
(Buitenste) hoofdverpakking breedte:	236.2 mm
(Buitenste) hoofdverpakking brutogewicht:	11020 g
(Buitenste) hoofdverpakking lengte:	495.3 mm
Hoeveelheid per (buitenste) hoofdverpakking:	1 stuk(s)
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 90 procent
Type beeldscherm:	LCD
Surge energy rating:	316 J
Aantal AC uitgangen:	8 AC-uitgang(en)
Stopcontacttypes:	NEMA 5–15R
Golf protectie functies:	Digital Subscriber Line (DSL), Network
Stroom (max.):	12 A
Output power capacity:	1.05 kVA
Ingang operation voltage (min):	110 V
Ingang operation voltage (max):	120 V
Uitgang operation voltage (min):	110 V
Uitgang operation voltage (max):	120 V
UPS-topologie:	Line-interactive
Aantal input fases:	1
Typische backup tijd op halve lading:	8.5 min
Typische backup tijd op volledige lading:	3 min
Seriële interface:	Ja
Output frequentie:	50/60 Hz
Hoorbare alarmstanden:	Alarm when on battery, Battery replacement, Fault, Low battery alarm, Overload alarm
EMI/RFI geluidsfiltering:	Ja
Spanningsbeveiliging:	Ja
Golfvorm:	Sinus
Koude start:	Ja
Automatic Voltage Regulation (AVR):	Ja