Tripp Lite SmartPro Expandable Rack/Tower Handleiding

Tripp Lite UPS SmartPro Expandable Rack/Tower

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite SmartPro Expandable Rack/Tower (13 pagina's) in de categorie UPS. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/13

Owner’s Manual

1111 W. 35th Street Chicago, IL 60609 USA

Customer Support: (773) 869-1234 • www.tripplite.com

Important Safety Instructions 2

Mounting 3

Quick Installation 5

Basic Operation 7

Storage and Service 11

Español

®is a registered trademark of Tripp Lite.

SmartPro®Rackmount

Intelligent, Line-Interactive UPS Systems

• 120V Sine-Wave Input/Output* • 500VA - 3000VA Capacities

• Extended-Run Options

* Except SMART500RT1U: sine-wave output on line; PWM output on battery.

Battery Replacement 12

Français 25

Optional Installation 6

WARRANTY

REGISTRATION

to win a FREE Tripp Lite product!

www.tripplite.com/warranty

Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains important instructions that should be followed during the installation, operation

and storage of all Tripp Lite UPS Systems. Failure to heed these warnings will void your warranty.

UPS Location Warnings

• Use caution when lifting UPS. Because of the considerable weight of all Rackmount UPS

systems, at least two people should assist in lifting and installing them.

• Install your UPS indoors, away from excess moisture or heat, dust or direct sunlight.

• For best performance, the ambient temperature near your UPS should be between 0° C and

40° C (between 32° F and 104° F).

• Leave adequate space around all sides of the UPS for proper ventilation. Do not obstruct its

vents or fan openings.

UPS Connection Warnings

• The UPS contains its own energy source (battery). The output terminals may be live even

when the UPS is not connected to an AC supply.

• Connect your UPS to a properly grounded AC power outlet. Do not modify the UPS’s plug

in a way that would eliminate the UPS's connection to ground. Do not use adapters that

eliminate the UPS’s connection to ground.

• Do not plug your UPS into itself; this will damage the UPS and void your warranty.

• If you are connecting your UPS to a motor-powered AC generator, the generator must provide

filtered, frequency-regulated computer-grade output. Connecting your UPS to a generator will

void its Ultimate Lifetime Insurance.

Equipment Connection Warnings

• Do not use Tripp Lite UPS Systems for life support applications in which a malfunction or

failure of a Tripp Lite UPS System could cause failure or significantly alter the performance

of a life-support device.

• Do not connect surge suppressors or extension cords to the output of your UPS. This might

overload the UPS and will void the surge suppressor and UPS warranties.

Battery Warnings

• Batteries can present a risk of electrical shock and burn from high short-circuit current.

Observe proper precautions. Do not dispose of the batteries in a fire. Do not open the UPS or

batteries. Do not short or bridge the battery terminals with any object. Unplug and turn off the

UPS before performing battery replacement. Use tools with insulated handles. There are no

user-serviceable parts inside the UPS. Battery replacement should be performed only by

authorized service personnel using the same number and type of batteries (sealed Lead-Acid).

The batteries are recyclable. Refer to your local codes for disposal requirements or in the

USA only call 1-800-SAV-LEAD or 1-800-8-BATTERY (1-800-822-8837) or visit

www.rbrc.com for recycling information. Tripp Lite offers a complete line of UPS System

Replacement Battery Cartridges (R.B.C.). Visit Tripp Lite on the Web at www.tripplite.com to

locate the specific replacement battery for your UPS.

• During hot-swap battery replacement, the UPS will not provide backup power in the event of

a blackout or other power interruptions.

• Do not operate UPS without batteries.

• When adding external battery packs to select models with external battery pack connectors,

connect only Tripp Lite-recommended battery packs of the correct voltage and type. Do not

connect or disconnect battery packs when the UPS is operating on battery power.

Mounting (Rack)

Mount your equipment in either a 4-post or 2-post rack or rack enclosure (see next page for 2-post

mounting). The user must determine the fitness of hardware and procedures before mounting. If

hardware and procedures are not suitable for your application, contact the manufacturer of your rack

or rack enclosure. The procedures described in this manual are for common rack and rack enclosure

types and may not be appropriate for all applications.

4-Post Mounting

All UPS models include hardware required to mount in a 4-post rack. Select models include an

adjustable rackmount shelf kit to provide additional support. If your UPS model does not include

an adjustable rackmount shelf kit, skip steps 1 and 2.

Connect the two segments of each shelf using the

included screws and nuts . Leave the screws slightly

loose so that the shelves can be adjusted in the next step.

Adjust each shelf to fit your rack, then mount them in

the lowest available space of your rack with the

screws, nuts and washers provided . Note that the

support ledges should face inward. Tighten the screws

that connect the shelf segments .

Attach mounting ears to the front mounting holes

of your equipment using the screws provided .

The ears should face forward.

Using an assistant if necessary, lift your equipment

and slide it onto the mounting shelves. Attach your

equipment to the rack by using the appropriate

hardware through its mounting ears and into the

rack rails.

Product specificaties

Merk:	Tripp Lite
Categorie:	UPS
Model:	SmartPro Expandable Rack/Tower
Kleur van het product:	Zwart
Gewicht:	21090 g
Breedte:	439.4 mm
Diepte:	341.6 mm
Hoogte:	87.6 mm
Snoerlengte:	3 m
Gewicht verpakking:	24280 g
Breedte verpakking:	584.2 mm
Diepte verpakking:	490.2 mm
Hoogte verpakking:	223.5 mm
LED-indicatoren:	Ja
Vormfactor:	Rackmontage
Land van herkomst:	China
Afmetingen verpakking (BxDxH):	610 x 514 x 229 mm
Aantal USB 2.0-poorten:	1
Certificering:	UL1778, CSA, NOM, FCC Part 15 Category B, FCC Part 68, ROHS
Geluidsalarm(en):	Ja
Responstijd:	4 ms
Uitgangsvermogen:	1350 W
Accu/Batterij oplaadtijd:	4.5 uur
Temperatuur bij opslag:	-15 - 50 °C
Afmetingen (B x D x H):	444 x 343 x 89 mm
Seriële poort(en):	1
(Buitenste) hoofdverpakking hoogte:	223.5 mm
(Buitenste) hoofdverpakking breedte:	584.2 mm
(Buitenste) hoofdverpakking brutogewicht:	26220 g
(Buitenste) hoofdverpakking lengte:	490.2 mm
Hoeveelheid per (buitenste) hoofdverpakking:	1 stuk(s)
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 95 procent
Surge energy rating:	480 J
Nominale input voltage:	120 V
Input-connectietype:	5-15P
Output power capacity:	1.5 kVA
UPS-topologie:	Line-interactive
Typische backup tijd op halve lading:	21 min
Typische backup tijd op volledige lading:	7.5 min
Hot-swap batterij:	Ja
Netspanning, in bedrijf:	120 V
Emergency Power Off (EPO):	Ja
Output-aansluitingen:	8 x 5-15R