Toolland DTB10000 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Toolland DTB10000 (32 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 148 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/32
DTB10000
USER MANUAL 2
HANDLEIDING 6
MODE D'EMPLOI 10
MANUAL DEL USUARIO 14
BEDIENUNGSANLEITUNG 18
INSTRUKCJA OBSŁUGI 22
MANUAL DO UTILIZADOR 26
DTB10000
V. 02 23/10/2020 2 ©Velleman nv
USER MANUAL
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its
lifecycle could harm the environment. Do not dispose of the unit (or batteries) as
unsorted municipal waste; it should be taken to a specialized company for recycling.
This device should be returned to your distributor or to a local recycling service. Respect
the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Toolland! Please read the manual thoroughly before bringing
this device into service. If the device was damaged in transit, do not install or use it and
contact your dealer.
2. Safety Instructions
Read and understand this manual and all safety signs before using this appliance.
This device can be used by children aged from 8 years and above, and persons with
reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning the use of
the device in a safe way and understand the hazards involved. Children shall not
play with the device. Cleaning and user maintenance shall not be made by children
without supervision.
This device contains an internal rechargeable battery. When the device reaches end-
of-life, it must be disposed of in accordance with local regulations.
3. General Guidelines
Refer to the Velleman ® Service and Quality Warranty on the last pages of this
manual.
All modifications of the device are forbidden for safety reasons. Damage caused by
user modifications to the device is not covered by the warranty.
Only use the device for its intended purpose. Using the device in an unauthorised
way will void the warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by
the warranty and the dealer will not accept responsibility for any ensuing defects or
problems.
Nor Velleman nv nor its dealers can be held responsible for any damage
(extraordinary, incidental or indirect) – of any nature (financial, physical…) arising
from the possession, use or failure of this product.
Keep this manual for future reference.
DTB10000
V. 02 23/10/2020 3 ©Velleman nv
4. Charging the Battery
1. Locate the charging connection on the handle and open the cover.
2. Connect the charger to the charging connection.
3. Make sure the charger plug is well-connected and inserted but do not force.
4. Connect the charger to the mains. The red LED indicates the battery is charging.
When the LED burns blue, the battery is fully charged. Disconnect the charger from
the mains to avoid overcharging.
a


Product specificaties

Merk: Toolland
Categorie: Niet gecategoriseerd
Model: DTB10000

Heb je hulp nodig?

Als je hulp nodig hebt met Toolland DTB10000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Toolland

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd