Beltronics STI Magnum Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Beltronics STI Magnum (16 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
BELTRONICS
5442 West Chester Road
West Chester OH
45069 USA
USA 800-341-2288
www.beltronics.com
©2011 BELTRONICS
Made in Canada
Features, specifications and prices subject to change without notice.
Model: STi MAGNUM Owners Manual
The BELTRONICS STi MAGNUM is the most
advanced radar, laser and safety detector
ever designed, and is ready to use right out
of the box with our recommended factory
settings.
The STi MAGNUM includes full X, K,
SuperWide Ka, and Safety Warning System
radar capability, front and rear laser
detection, dual LNA (low noise amplifier)
microwave receivers, digital signal
processing (DSP) for superior range and
reduced false alarms, our patented Mute
and AutoMute, audible and visual band
alerts, and all the performance youd expect
from BELTRONICS.
In addition, the BELTRONICS STi
MAGNUM contains the following
revolutionary features:
Dual LNA (low noise amplifier)
receivers provide the longest
possible warning against all radar
threats.
Advanced Signal Rejection Software
(TSR).
TotalShield™ RF Technology
provides the ultimate in
undetectability.
Programmable Alert Lamp provides
additional visual indication of alerts.
Ultra-bright text-display provides
easy to read information from any
angle.
High and low voltage warning is
given any time the vehicle’s voltage
drops below 10.5 volts, or goes
above 16.5 volts.
Easy-to-use Programming lets you
customize up to 9 features.
Exclusive AutoScan mode intelligently
reduces unwanted false alarms.
Tech Display provides actual
numeric radar frequency for any
radar signal.
Programmable Bands (on/off).
Detects and decodes up to 64 Safety
Warning System messages.
Includes new coiled SmartPlug,
which provides a convenient mute
button right on the plug.
If you’ve used a radar detector before,
a review of the Quick Reference Guide on
pages 4 and 5, and the Programming
information on pages 12 and 13 will briefly
explain the new features.
If this is your first detector, please
read the manual in detail to get the most
out of your BELTRONICS STi MAGNUMs
outstanding performance and innovative
features.
Please drive safely.
1Programming Details
Quick Reference Card
An example
Here is how you would turn the STi
MAGNUM’s AutoMute feature off.
1 Enter the Program Mode by holding
both the VOLUME/MUTE and SENS buttons
down for 2 seconds. The STi MAGNUM will
beep twice and display Program.
2 Then hold the RVW button down. The
STi MAGNUM will scroll through the
categories, starting with display (
Display),
power-on indication ), then alert (Pilot
lamp (Alamp), Voice, Power-on sequence,
signal strength meter, and then AutoMute.
3 Release the RVW button when the STi
MAGNUM shows the AutoMute item. Since
the factory setting is for AutoMute to be on,
the STi MAGNUM will display aMute ON.
If you accidentally don’t release the
Review button in time, and the STi
MAGNUM goes to the next category, hold
the RVW button down again, and scroll
through the categories again until aMute
is displayed.
4 Press the CHG button to change from
aMute ON aMute OFF to .
5 To complete the Programming, simply
wait 8 seconds without pressing any
button. The STi MAGNUM will display
Complete, beep 4 times, and return to
normal operation.
There are 9 user-selectable options so you
can customize your STi MAGNUM for your
own preferences.
The buttons labeled VOLUME/MUTE
and SENS are also used to enter the Program-
ming Mode, REVIEW your current program
settings, and to CHANGE any settings as
desired. The abbreviations PGM, RVW, and
CHG are located on the lower part of the
display lens and are highlighted in graphics.
How to use Programming
1 To enter Program Mode, press and hold
both VOLUME/MUTE and SENS
buttons down for 2 seconds. The unit
will beep twice, and will display the word
Program.
2 Then press the RVW button to review
the current settings. You can either tap
the button to change from item to item, or
hold the button to scroll through the items.
3 Press the CHG button to change any
setting. You can either tap the button to
change from setting to setting, or hold the
button to scroll through all the options.
4 To leave Program Mode, simply wait
8 seconds without pressing any button. The
unit will display , beep 4 times,
Complete
and return to normal operation.
Factory Default Settings
To reset the STi MAGNUM to its original
factory settings, press and hold the
“VOLUME/MUTE, and SENS, buttons
while turning the power on. The STi
MAGNUM’s display will provide a Reset
message, accompanied by an audible
alert, acknowledging the reset.
Quick Reference Card
FCC Note: Modifications not expressly
approved by the manufacturer could
void the user’s FCC granted authority
to operate the equipment.
Congratulations
Remove card along perforations
Remove card along perforations
Quick Reference Guide 4-5
Installation 6-7
Power Connection 6
Mounting Location 6
Windshield Mount 7
Controls and Features 8-11
Power and Volume Control 8
Power-on Indication 8
Voice 8
AutoMute 8
Mute 8
Sensitivity Button 9
Brightness 9
Audible Alerts 10
Power Connector 10
Signal Strength Meter 10
Threat Display 11
Tech Display 11
Programming 12 6-1
How to use Programming 12
Example of Programming 12
Overview of Programming 13
Details of Programming 14-16
Technical Details 17-23
Specifications 17
Interpreting Alerts 18-19
How Radar Works 20
How POP” Works 20
TSR Traffic Signal Rejection Software 21
How Laser Works 21
How TotalShield Technology Works 22
How Safety Radar Works 22-23
Service 24-29
Troubleshooting 24-25
Service 26
Registration 27-28
Warranty and Accessories 29
3
2
Quick Reference Card
* Factory Default Settings
Press the buttonRVW
to go from one category
to the next
DISPLAY
PILOT
(Power-on indication)
ALERT LAMP
VOICE
POWER-ON SEQUENCE
SIGNAL STRENGTH METER
AUTOMUTE
BRIGHTNESS
BANDS
Disp STD
Disp INV
Pilot HWY
Pilot H
Pilot V
Alamp ON
Alamp OFF
Voice ON
Voice OFF
PwrOn STD
PwrOn FST
Meter STD
Meter THT
Meter TEC
aMute ON
aMute OFF
Brt Auto
Brt Min
Brt Med
Brt Max
Brt Dark
Bands DFT
Bands MOD
X ON or (default is on) OFF
K ON or (default is on) OFF
Ka ON or (default is on) OFF
POP ON or (default is off) OFF
LSR ON or (default is on) OFF
SWS ON or (default is off) OFF
TSR ON or (default is on) OFF
Press the buttonCHG
to change your setting
within a category
* Standard display
Inverted display
* Full word: Highway, AutoScan, etc.
Letter: H, A, C, or Cnx
Vehicle voltage
* Alert lamp on
Alert lamp off
* Voice alerts on
Voice alerts off
* Standard power-on sequence
Fast power-on sequence
* Standard signal strength meter
Threat Display
Tech Display
* AutoMute on
AutoMute off
* Automatic brightness
Minimum brightness
Medium brightness
Maximum brightness
All dark
* Default bands
Factory default settings modified
Turn bands “ON” or “OFF” by
pressing the “SENS” button
Table of ContentsQuick Reference Card
Remove card along perforations
Remove card along perforations


Product specificaties

Merk: Beltronics
Categorie: Niet gecategoriseerd
Model: STI Magnum

Heb je hulp nodig?

Als je hulp nodig hebt met Beltronics STI Magnum stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Beltronics

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd