Beltronics GT-360 Handleiding


Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor Beltronics GT-360 (10 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10
Programming
Press BRT to go from Press VOLUME + or โ€“ to change
one category to the next your setting within a category
User Mode Access and customize all Settings and Preferences
Advanced*
Novice Access and customize units and display color, (all other
Settings are set to factory defaults)
NOTE: Switch back to Advance mode to view all Preferences
Pilot Scan Bar* Scanning Bar with Full Word
Full Word Full Word: AutoScan, Auto NoX, or Highway
Display Color Set color to match your vehicleโ€™s dash displayCopper*/Blue/Green/Red
Speed Display Displays current speedOn*
O๎˜Ÿ Displays battery voltage
Cruise Alert O๎˜Ÿers double beep alert tones below speci๎˜žed speedO๎˜Ÿ / 20-160 mph
20 mph*
Over Speed Reminds you when you exceed a speci๎˜žed speedO๎˜Ÿ / 20-160 mph
70 mph*
Meter Mode Single band with front and rear signal strength bar graphsStandard*
Tech Single band with numeric frequency and front and rear
signal strength bar graphs
Basic Simple messages replace bands:
Caution (if traveling below cruise alert limit)
Slow Down (if traveling above cruise alert limit)
Tones Standard* Standard Beltronics alert tones
Mild Mild doorbell chime alert tones
AutoMute Low/Med*/High/O๎˜Ÿ
Automatically reduces audio to preferred volume during alert
AutoLock On* / O๎˜Ÿ Automatically stores and locks out false alarms
Units English*/Metric Units for distance and speed
Language English*/Espanol Language for voice and text
Voice On* / O๎˜Ÿ Voice announcements
GPS Filter Enables GPS-powered featuresOn* / O๎˜Ÿ
Press and hold the BRT and SEN buttons to access Programming. To exit Programming, simply wait a few
seconds without pressing a button. The unit will display to con๎˜žrm your selections.
Completed
7
AutoPower O๎˜Ÿ Power turns on or o๎˜Ÿ depending on your vehicleโ€™s ignition
type (constant power or switched)
1 Hour Powers o๎˜Ÿ automatically after 1 hour
2 Hours Powers o๎˜Ÿ automatically after 2 hours
4 Hours* Powers o๎˜Ÿ automatically after 4 hours
8 Hours Powers o๎˜Ÿ automatically after 8 hours
NOTE: If AutoPower is on, to save screen life the display screen goes
blank after 30 minutes without moving.
Band Enables Default SettingsDefault*
Modi๎˜žed Band Enables have been modi๎˜žed from their default settings
Press SEN to go from one Press VOLUME + or โ€“ to change
band category to the next your setting within a category
X Band On* / O๎˜Ÿ
K Band Freq: 24.050-24.250 GHz On* / O๎˜Ÿ
NOTE: When K Band is o๎˜Ÿ, you can select separate segments of the
band to turn on or o๎˜Ÿ.
KN1 On* / O๎˜Ÿ Freq: 24.050 - 24.110 GHz
KN2 On* / O๎˜Ÿ Freq: 24.110 - 24.175 GHz
KN3 On* / O๎˜Ÿ Freq: 24.175 - 24.250 GHz
KN4 On / O๎˜Ÿ* Freq: 23.950 - 24.050 GHz
Ka Band Freq: 33.400-36.000 GHzOn* / O๎˜Ÿ
NOTE: When Ka Band is o๎˜Ÿ, you can select separate segments of the band to turn
on or o๎˜Ÿ.
KaN1 On / O๎˜Ÿ* Freq: 33.400 - 33.700 GHz KaN6 On / O๎˜Ÿ*
Freq: 34.800 - 35.160 GHz
KaN2 On / O๎˜Ÿ* Freq: 33.700 - 33.900 GHz KaN7 On / O๎˜Ÿ*
Freq: 35.160 - 35.400 GHz
KaN3 On* / O๎˜Ÿ Freq: 33.900 - 34.200 GHz KaN8 On* / O๎˜Ÿ
Freq: 35.400 - 35.600 GHz
KaN4 On* / O๎˜Ÿ Freq: 34.200 - 34.600 GHz KaN9 On / O๎˜Ÿ*
Freq: 35.600 - 35.840 GHz
KaN5 On* / O๎˜Ÿ Freq: 34.600 - 34.800 GHz KaN10 On / O๎˜Ÿ*
Freq: 35.840 - 36.000 GHz
Ka Band On* / O๎˜Ÿ
Ka-POP On / O๎˜Ÿ*
Laser On* / O๎˜Ÿ
TSR On* / O๎˜Ÿ Automatically rejects tra๎˜c ๎˜œow sensors-monitoring false alarms
Marker Enable Default SettingsOn* / O๎˜Ÿ
Modi๎˜žed Marker Enables have been modi๎˜žed from their default settings
NOTE:
AutoPower only
works with constant
power ignition
8
9
Press SEN to go from one Press VOLUME + or โ€“ to change
marker category to the next your setting within a category
Other On* / O๎˜Ÿ Other location
Redlight On* / O๎˜Ÿ Red light camera
Red & Speed Red light & speed cameraOn* / O๎˜Ÿ
Speed Cam Speed cameraOn* / O๎˜Ÿ
Air Patrol Known aircraft patrolled areasOn / O๎˜Ÿ*
NOTE: User cannot mark an air patrol location
Speed Trap On* / O๎˜Ÿ Speed trap
Air Patrol Known aircraft patroled areas On / O๎˜Ÿ*
NOTE: User cannot mark an Air Patrol location
Clear Locations Clear all user Marked locations. Press SEN button to con๎˜žrm
Marked
Lockouts Clear all lockouts. Press SEN button to con๎˜žrm
Defender Clear all DEFENDER data. Press SEN button to con๎˜žrm
Format Clear DEFENDER database, all markers, and all lockouts.
Press SEN button to con๎˜žrm
*Default Setting


Product specificaties

Merk: Beltronics
Categorie: Niet gecategoriseerd
Model: GT-360

Heb je hulp nodig?

Als je hulp nodig hebt met Beltronics GT-360 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Beltronics

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd