Toledo TCS-1600 Handleiding

Toledo Zaagmachine TCS-1600

Lees hieronder de 📖 handleiding in het Nederlandse voor Toledo TCS-1600 (24 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 55 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
Ferm B.V. P.O. Box 30159 8003 CD Zwolle-NL www.toledo.nl 0407-29
Chain saw
Kettensäge
Kettingzaag
Scie à chaînette TCS-1600 Art.nr. KZM2002
UK
D
NL
F
USERS MANUAL
GEBRAUCHSANWEISUNG
GEBRUIKSAANWIJZING
MODE D’EMPLOI
Toledo 47
2Toledo
15
12 6 14
1617 4 5 18 11
8 10 9 1
3 2 13
7
GENERAL INFORMATION
TCS-1600
EXPLODED VIEW/VUE ÉCLATÉE
46 Toledo
ELECTRIC CHAIN SAWS
CONTENTS:
1. Safety rules
2. Specifications
3. Assembly instructions
4. Operating instructions
5. Maintenance
1. SAFETY RULES
MEANING OF SYMBOLS MARKED ON THE
PRODUCT
Read the user manual before using the machine
Whenever the machine is in use, safety goggles
must be worn to safeguard against flaying
object, as must ear protectors, such as a sound-
proof helmet, in order to protect the operator’s hearing.
If the operator is working in an area where there is a risk
of falling objects, a safety helmet must also be worn.
Wear gloves to protect your hands
Warning! Danger
Do not expose to rain
Remove plug from the mains immediately if
cable is damaged or cut
Wear safety boots to protect against electric
shock
Sound power level
WARNING! When using electric tools, basic
safety precautions, including the following, should
always be followed to reduce the risk of fire, elec-
tric shock and personal injury.
Read all these instructions before operating this product
and save these instructions.
WARNING: Take care not to expose this tool to
rain and remove plug from mains immediately if
the supply cable is damaged.
1. Keep work area clean
Cluttered areas invite injuries. Do not start cutting
until you have a clear work area, secure footing,
and a planned retreat path from the falling tree.
2. Consider work area environment
Use extreme caution when cutting small sized brush
and sapling, as slender material may catch the saw
chain and be whipped toward you or pull you off
balance. Do not operate a chain saw in a tree unless
you are specifically trained to do so. When cutting
a limb that is under tension, be alert for spring back
so that you will not be struck when the tension in
the wood fibers is released. Do not expose the
chain saw to rain. Do not use the chain saw in damp
or wet locations. Do not use the chain saw in the
presence of flammable liquids or gases.
3. Store idle chain saw
When not in use, tools should be stored in a dry,
high or locked up place, out of reach of children.
4. Do not force the chain saw
The chain saw will do a better and safer job when
used at the rate for which it was intended.
5. Use the right tool
Cut wood only. Do not use the chain saw for pur-
poses for which it was not intended. For example,
do not use the chain saw for cutting plastic, mas-
onry, or non-building materials.
6. Dress properly
Do not wear loose clothing or jewelry, as they can
get caught in moving parts. Non-skid footwear is
recommended when working outdoors. Wear
protective hair covering to contain long hair.
7. Use safety gear
Use safety glasses, safety footwear, snug fitting
clothing, protective gloves, and protective hearing
and head gear.
8. Carrying the saw
Carry the saw by the front handle with the saw stop-
ped. Keep your finger off the switch, and make sure
that the guide bar and saw chain are to the rear.
9. Do not abuse the cord
Never carry the tool by the cord or yank it to dis-
connect it from the socket. Keep the cord away
from heat, oil and sharp edges.
10. Secure work
Use clamps or a vice to hold the work.
11. Do not overreach
Keep proper footing and balance at all times.
12. Maintain the chain saw with care
Inspect the chain saw cords periodically and, if
damaged, have them repaired by an authorized ser-
vice facility. Keep the cord clear of the chain and
operator at all times. Never carry the saw by the
cord or pull it to disconnect from receptacle. Keep
the cord from oil and sharp edges. Inspect the
extension cords periodically and replace if dama-
ged. Keep tools sharp and clean for better and
safer performance. Follow instructions for lubrica-
ting and changing accessories. Keep handles dry,
clean and free from oil and grease.
13. Disconnect the chain saw
Disconnect the chain saw when not in use, before
servicing, and when changing accessories and
attachments such as saw chain and guard.
Toledo 3
PARTS LIST TCS-1600
PC DESCRIPTION REF. NR.
KZA1001 CHAIN GUIDE BAR 40 CM 4
KZA1002 SAW CHAIN 40 CM 5
501463 CHAIN ADJUSTMENT 7
501453 OILER CAP 11
501454 RUBBER GASKET 12
501456 MICRO SWITCH 16
501457 GUARD 18
501455 MAIN SWITCH 20
501460 16" CHAIN BAR COVER 24
501459 BUTTON FOR MAIN SWITCH 30
501458 BRUSH (SET) 40
KZA1003 BOTTLE OF BAR & CHAIN OIL 95 ML -
LISTE DES PIÈCES TCS-1600
PC DESCRIPTION REF. NR.
KZA1001 NEZ DU GUIDE-CHAÎNE 40 CM 4
KZA1002 CHAÎNE COUPANTE 40 CM 5
501461 PLAQUE RÉGLABLE (EXTÉRIEUR) 7
501453 BOUCHON D'HUILE 11
501454 GARNITURE 12
501456 CONNECTEUR 16
501457 PROTECTEUR 18
501455 DISJONCTEUR 20
501460 16" FOURREAU DE PROTECTION 25
501459 BOUTON DE DISJONCTEUR 31
501462 PLAQUE RÉGLABLE (INTÉRIEUR) 33
501458 BALAI DE DYNAMO (BATTERIE) 40
KZA1003 BOUTEILLE D'HUILE 95 ML -


Product specificaties

Merk: Toledo
Categorie: Zaagmachine
Model: TCS-1600

Heb je hulp nodig?

Als je hulp nodig hebt met Toledo TCS-1600 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Zaagmachine Toledo

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine