Technical Pro MM3000 Handleiding

Technical Pro Staafmixer MM3000

Lees hieronder de 📖 handleiding in het Nederlandse voor Technical Pro MM3000 (11 pagina's) in de categorie Staafmixer. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/11
L R
Technical Pro
User Manual for:
MM3000
Professional Karaoke Amplifier
with Bluetooth & USB & SD Card Inputs
QUESTIONS / COMMENTS CALL 888-842-6277 or email info@tpro.com
Congratulations and thank you for your purchase of this Technical Pro professional karaoke
amplifier, the MM3000. To get the most from your
MM3000
,
it is recommended that you review all of the information provided in this instruction manual before operating this equipment.
If you've spent any time at all in professional audio, you know the name Technical Pro and what it stands for — incredible performance &
sound, and the ultimate in reliability under harsh conditions. And now, Technical Pro offers the same technology in a series of karaoke amplifier
bringing more of what sets Technical Pro apart from all others.
1- Read these instructions thoroughly before using this item.
2- Keep these instructions for future reference.
3- Heed all warnings.
4- Follow all instructions.
5- WARNING: To prevent fire or electric shock, do not expose this equipment to rain or moisture. Do not store or operate this
product near any liquids.
6- Clean only with a dry cloth.
7- Do not store or operate this product near any heat sources such as radiators, heat registers, stoves, or other apparatuses
(including amplifiers) that produce heat.
8- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than
the other. A grounding plug has two blades and a round grounding prong. The wide blade or third prong is provided for your safety.
If the provided plug does not fit your outlet, consult an electrician for the replacement of the obsolete outlet.
9- Protect the all wires connected to this unit from being walked on or pinched, particularly plugs and the point where they exit from
the unit. When removing the cord from the power outlet, remove it by holding the plug not by pulling the cord.
10- Unplug the unit during lightning storms or when unused for long periods of time.
11- When wiring this unit and all other equipment used in connection to this unit make sure that all of your equipment is turned OFF.
12- Once installation and wiring is complete power on all your equipment with the volume and level controls turned DOWN. Once
all the equipment is ON slowly raise the volume or level controls to their proper positions.
13- When grounding this unit, be sure to do so correctly, so as not to defeat the built-in grounding in this unit.
14- Before placing, installing, rigging, or suspending any product, inspect all hardware, suspension, cabinets, transducers,brackets
and associated equipment for damage. Any missing, corroded, deformed, or non-load rated component could significantly reduce
the strength of the installation, placement or array. Any such condition severely reduces the safety of the installation and should be
immediately corrected. Use only hardware which is rated for the loading conditions of the installation and any possible short-term,
unexpected overloading. Never exceed the rating of the hardware or equipment.
15- Consult a licensed, Professional Engineer regarding physical equipment installation. Ensure that all local, state and national
regulations regarding the safety and operation of equipment are understood and adhered to.
16- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,
such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
WARNING!
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER OF THIS UNIT. THERE
ARE NOUSER-SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED TECHNICIAN.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence
of "dangerous" voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to humans. Users should exhibit extra safety when this symbol appears in this instruction manual and
follow all precautions as they are stated.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in this manual.
Introduction
MM3000
MM3000 Front Panel
1.Power Button: Press this button to power the unit on and off.
2.Music Treble Control: Turn this knob to adjust the treble of music input signal.
3.Music Mid Control:
Use this knob to adjust the mid level frequencies of music input signal.
4.
Headphone Output:
Connect your headphone here. Make sure the volume level of the unit is turned down before
making the connection.
5.Music Bass Control: Turn this knob to adjust the bass of music input signal.
6.Music Balance Control: Turn this knob to adjust the balance of music input signal.
7.Music Volume: Turn this knob to adjust the volume of music input signal.
8.Dual Ten Band Equalizers: Use the sliders to increase or decrease the signal strength of the respective frequencies.
The equalization points are 32Hz, 64Hz,125Hz, 250Hz, 500Hz,1KHz, 2KHz, 4KHz, 8KHz and 16KHz.
9.Music Volume: Use this knob to adjust the music input signal volume level.
10.MIC/Line 1-8 Volume: UUse this knob to adjust the volume for all the eight microphone / line 1-8 inputs.
11.MP3(1/8”) Input: Connect your MP3 player here. Make sure to press the input selector button (13) until “MP3”
appears on the display screen to play the signal from the MP3 player.
12.MIC Priority:
Press this button to enable the microphone priority function. When this function is turned on, the unit will
decrease the music input signal level if the microphones are connected to the unit and are transmitted a signal. If there is
no signal coming through the microphones, the music input signal will not decrease. Press again to disable this function.
13.Input Selector: Press this button to switch through the various inputs; USB flash drive, SD card, MP3, FM tuner,
Bluetooth, AUX and DVD.
14.Recording from the AUX / MP3 / DVD and Microphone Inputs:
When the input selected is MP3/AUX/DVD
and there is an USB flash drive or SD card (with blank space on it) inserted into their respective slot, pressing and
holding this button will activate the recording function. Press this button and hold for several seconds and the word
“REC” will display on the screen. The unit will create a new file in the connected USB flash drive or SD card and get
ready to make a recording. At this point there is no actual recording yet. Press the button again and the unit will start
recording onto the USB flash drive or SD Card and the elapsed time and “REC” will display on the screen. Press the
button a third time to pause the recording and the word “REC” and the elapsed time displayed on the screen will
start flashing. Press again to continue the recording. Press and hold this button for several seconds to save the file
and end the recording and exit. If both USB flash drive and SD card are connected, the unit will begin recording onto
the USB flash drive. If the USB flash drive is full, remove it and then press the record button again to start another
recording. The unit will also be able to record the signal from microphones onto the USB flash drive or SD Card.
MM3000
L R
1567 4 232223
2425 1718192021 16 15 14 13 912 11 10 8
31 353329 32 343026 27 28 39 4036 37 38
41
42

Product specificaties

Merk: Technical Pro
Categorie: Staafmixer
Model: MM3000

Heb je hulp nodig?

Als je hulp nodig hebt met Technical Pro MM3000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Staafmixer Technical Pro

Technical Pro

Technical Pro IA1200 Handleiding

18 Mei 2024
Technical Pro

Technical Pro H4502HD Handleiding

18 Mei 2024
Technical Pro

Technical Pro MM3000 Handleiding

17 Mei 2024

Handleiding Staafmixer

Nieuwste handleidingen voor Staafmixer

Oster

Oster FPSTSM3711 Handleiding

20 December 2024
Oster

Oster FPSTHS3610 Handleiding

20 December 2024
Oster

Oster FPSTHB2615W Handleiding

20 December 2024
Girmi

Girmi MX03 Handleiding

17 December 2024
Girmi

Girmi MX17 Handleiding

17 December 2024
Girmi

Girmi MX39 Handleiding

17 December 2024
Behringer

Behringer XENYX 1003B Handleiding

14 December 2024
Taurus

Taurus Robot 750 Pink Edition Handleiding

11 December 2024
Ambiano

Ambiano GT-SB-08 Handleiding

10 December 2024
Pyrex

Pyrex SB-1110 Handleiding

9 December 2024