Technical Pro IA1200 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Technical Pro IA1200 (7 pagina's) in de categorie Staafmixer. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
Integrated Amplifier
with USB / SD Inputs
IA1200
Congratulations and thank you for your purchase of this Technical Pro Professional integrated amplifier, the IA1200. To get the most from
your , it is recommended that you review all of the information provided in this instruction manual before operating this equipment.
IA1200
If you've spent any time at all in professional audio, you know the name Technical Pro and what it stands for — incredible performance &
sound, and the ultimate in reliability under harsh conditions. And now, Technical Pro offers the same technology in a series of
integrated
amplifier bringing more of what sets Technical Pro apart from all others.
1- Read these instructions thoroughly before using this item.
2- Keep these instructions for future reference.
3- Heed all warnings.
4- Follow all instructions.
5- WARNING: To prevent fire or electric shock, do not expose this equipment to rain or moisture. Do not store or operate this
product near any liquids.
6- Clean only with a dry cloth.
7- Do not store or operate this product near any heat sources such as radiators, heat registers, stoves, or other apparatuses
(including amplifiers) that produce heat.
8- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than
the other. A grounding plug has two blades and a round grounding prong. The wide blade or third prong is provided for your safety.
If the provided plug does not fit your outlet, consult an electrician for the replacement of the obsolete outlet.
9- Protect the all wires connected to this unit from being walked on or pinched, particularly plugs and the point where they exit from
the unit. When removing the cord from the power outlet, remove it by holding the plug not by pulling the cord.
10- Unplug the unit during lightning storms or when unused for long periods of time.
11- When wiring this unit and all other equipment used in connection to this unit make sure that all of your equipment is turned OFF.
12- Once installation and wiring is complete power on all your equipment with the volume and level controls turned DOWN. Once
all the equipment is ON slowly raise the volume or level controls to their proper positions.
13- When grounding this unit, be sure to do so correctly, so as not to defeat the built-in grounding in this unit.
14- Before placing, installing, rigging, or suspending any product, inspect all hardware, suspension, cabinets, transducers,brackets
and associated equipment for damage. Any missing, corroded, deformed, or non-load rated component could significantly reduce
the strength of the installation, placement or array. Any such condition severely reduces the safety of the installation and should be
immediately corrected. Use only hardware which is rated for the loading conditions of the installation and any possible short-term,
unexpected overloading. Never exceed the rating of the hardware or equipment.
15- Consult a licensed, Professional Engineer regarding physical equipment installation. Ensure that all local, state and national
regulations regarding the safety and operation of equipment are understood and adhered to.
16- Refer all servicing to qualifie nel. Servicing is required when the apparatus has been damaged in any way,
such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
WARNING!
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER OF THIS UNIT. THERE
ARE NOUSER-SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED TECHNICIAN.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence
of "dangerous" voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to humans. Users should exhibit extra safety when this symbol appears in this instruction manual and
follow all precautions as they are stated.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in this manual.
Introduction
IA1200
IA1200 Front Panel
1.Power: Press this button to power the unit on and off.
2.USB Input: Insert your USB flash drive into this slot. The unit will read .mp3 files from
automatically
the USB flash drive USB flash drive can not exceed 32GB. Make . The maximum storage size of the
sure USB/SD input mode is selected to play the signal from the USB flash drive.
3.SD Card Input: Insert your SD card into this slot.The unit will read .mp3 files from the SD Card.The
maximum storage size of the SD card can not exceed 32GB. Make sure USB/SD input mode is
selected to play the signal from the SD card.
4.MP3 Input: Connect your MP3 player here. Make sure the MP3 input mode is selected to play the signal
from the MP3.
5.MIC1:
Microphone Input
¼"
.
6.MIC2: Microphone Input
¼"
.
7.Microphone Volume:
Use this knob to adjust the volume of the microphones.
8.Microphone ECHO:
Use this knob to adjust the microphone’s echo.
9.Headphone Output:
Connect your headphone here. Make sure the volume level of the unit is turned down
before making the connection.
10.Volume: Use this knob to adjust the master volume output.
11.
Play / Pause
: When the input selector is in the position of SD/USB, press this button to pause the
signal from the USB flash drive or SD card. Press this button again to play. The play/pause function
will only work for the USB flash drive or SD card. In MP3, AUX or DVD input, press this button to mute
the unit.
12.Previous Track Button: Press this button to go back to the beginning of the current track or to the previous
track on either the
USB flash drive or SD card.
13.Next
Track
Button: Press this button to go to the beginning of the next track on either the USB flash
drive
or SD card.
14.Record: When the input is MP3/AUX/ DVD and there is an USB flash drive or SD card (with blank space
on it) inserted into their respective slot, press this button and hold for several seconds to activate the
recording function. After holding the button down for several seconds the unit will create a new file in the
connected USB flash drive or SD card and get ready to record. The word “REC” will appear on the
display screen. At this point there is no actual recording yet. againPress this button and the unit will
start recording. The elapsed time of the recording onto the USB flash drive or SD card will display on
the screen. To pause the recording press this button once again. When paused, the pause symbol on the
screen will be illuminated. Once paused, press this button once again to continue the recording on the
IA1200
1
11 12 13 14 15 16 17 18
32 4 5 6 7 8 9 10


Product specificaties

Merk: Technical Pro
Categorie: Staafmixer
Model: IA1200

Heb je hulp nodig?

Als je hulp nodig hebt met Technical Pro IA1200 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Staafmixer Technical Pro

Handleiding Staafmixer

Nieuwste handleidingen voor Staafmixer