Tanita InnerScan BC-590BT Handleiding

Tanita Weegschaal InnerScan BC-590BT

Lees hieronder de 📖 handleiding in het Nederlandse voor Tanita InnerScan BC-590BT (27 pagina's) in de categorie Weegschaal. Deze handleiding was nuttig voor 75 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/27
Instruction Manual
Read this Instruction Manual carefully and keep it for future reference.
Mode d´emploi
A lire attentivement et à garder en cas de besoin.
Manual de instrucciones
Lea detenidamente este manual de instrucciones y guárdelo para futura referencia.
Manual de instruções
Leia cuidadosamente este manual e guarde-o para futura referência.
Model : BC-590BT
with
MANUAL
Table of Contents
Introduction • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
1
Features and Functions ••••••••••••••••••••2
Preparations Before Use •••••••••••••••••••2
Getting Accurate Readings ••••••••••••••••3
Automatic shut-down function ••••••••••••3
Switching the weight mode •••••••••••••••3
Setting and storing personal data in memory
•••4
Operation with Bluetooth ••••••••••••••••••5
(Using Personal key)
Operation with Bluetooth ••••••••••••••••••7
(Using Guest Mode)
Error Process •••••••••••••••••••••••••••••••
9
Taking Weight Measurement Only • • • • • • • 10
Troubleshooting•••••••••••••••••••••••••••
10
Output Data Format ••••••••••••••••••••••11
Specifications •••••••••••••••••••••••••••••
12
Bluetooth Specifications • • • • • • • • • • • • • • • • •12
1
Table des matières
Introduction •••••••••••••••••••••••••••••••
13
Caracyèristiquesn •••••••••••••••••••••••••
14
Avant utilisation •••••••••••••••••••••••••••
14
Comment obtenir des résultats exacts • • 15
Fonction d’qrrét automatique ••••••••••15
Commutation do mode poids ••••••••••••15
Reglage et enregistrement des données personnelles en mémoire
• • 16
Utilisation avec Bluetooth ••••••••••••••••17
(Utilisation de la touche Personnelle)
Utilisation avec Bluetooth ••••••••••••••••19
(Utilisation du mode Invité)
Traitement d’ferreur • • • • • • • • • • • • • • • • • • • • •
21
Lecture du poids uniquement ••••••••••••22
Dépannage ••••••••••••••••••••••••••••••••
22
Format de sortie des données •••••••••••23
Caractéristiques • • • • • • • • • • • • • • • • • • • • • • • • • •
24
Spécifications techniques Bluetooth • • • •24
Índice de materias
Introducción ••••••••••••••••••••••••••••••
25
Prestaciones y funciones•••••••••••••••••26
Preparaciones antes del uso •••••••••••••26
Cómo obtener lecturas exactas ••••••••••27
Fanción de apagado automatico •••••••••27
Cambiando el modo del peso ••••••••••••27
Introducción y almacenamiento de datos personales en la memoria
• • 28
Operación con Bluetooth •••••••••••••••••29
(Uso de la tecla Personal)
Operación con Bluetooth •••••••••••••••••31
(Uso del modo Invitado)
Proceso de error ••••••••••••••••••••••••••
33
Cómo obtener lecturas de peso solamente
• • 34
Resolución de fallos•••••••••••••••••••••••
34
Formato de datos de salida ••••••••••••••35
Detalles Técnicos •••••••••••••••••••••••••
36
Especificaciones de Bluetooth •••••••••••36
Tabela de conteúdo
Introdução • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
37
Características e funções ••••••••••••••••38
Preparativos antes do uso •••••••••••••••38
Obtendo leitura precisa •••••••••••••••••••39
Função desligamento automático • • • • • • •39
Alterando a unidade de medida do Peso • • 39
Programar e armazenar dados pessoais na memória
• • 40
Operação com Bluetooth •••••••••••••••••41
(Usando a tecla Pessoal)
Operação com Bluetooth •••••••••••••••••43
(Usando o Modo de Visitante)
Processo de erros ••••••••••••••••••••••••
45
Somente a leitura do peso •••••••••••••••46
Localizando defeitos ••••••••••••••••••••••
46
Formato dos dados de saída •••••••••••••47
Especificações ••••••••••••••••••••••••••••
48
Especificações do Bluetooth •••••••••••••48
Introduction
Thank you for selecting a Tanita Body Composition Monitor. This monitor is one in a wide range of
home healthcare products produced by Tanita.
This Instruction Manual will guide you through the setup procedures and outline the key features.
Please keep it handy for future reference. Additional information on healthy living can be found on
our website www.tanita.com.
Tanita products incorporate the latest clinical research and technological innovations.
All data is monitored by our Tanita Medical Advisory Board to ensure accuracy.
Note : Read this Instruction Manual carefully and keep it handy for future reference.
Safety Precautions
Note that people with an electronic medical implant, such as a pacemaker, should not use a Body Composition Monitor as it pass-
es a low-level electrical signal through the body, which may interfere with its operation.
Pregnant women should use the weight function only. All other functions are not intended for pregnant women.
Do not place this monitor on slippery surfaces such as a wet floor.
Recorded data may be lost if the monitor is used incorrectly or is exposed to electrical power surges. Tanita takes no responsibility
for any kind of loss caused by the loss of recorded data. Tanita takes no responsibility for any kind of damage or loss caused by
the monitor, or any kind of claim made by a third person.
Important Notes for Users
This Body fat monitor is intended for adults and children (ages 7-17) with inactive to moderately active lifestyles and adults with
athletic body types.
Tanita defines
“
athlete” as a person involved in intense physical activity of approximately 10 hours per week and
who has a resting heart rate of approximately 60 beats per minute or less. Tanita's athlete definition includes
“
lifetime of fitness” individuals who have been fit for years but currently exercise less than 10 hours per week.
The body fat monitor function is not intended for pregnant women, professional athletes or bodybuilders.
Recorded data may be lost if the unit is used incorrectly or is exposed to electrical power surges. Tanita takes no responsibility for
any kind of loss caused by the loss of recorded data.
Tanita takes no responsibility for any kind of damage or loss caused by these units, or any kind of claim made by a third person.
Note : Body fat percentage estimates will vary with the amount of water in the body, and can be affected by dehydration or over-
hydration due to such factors as alcohol consumption, menstruation, illness, intense exercise, etc.
32
Getting Accurate Readings
To ensure accuracy, readings should be taken without clothing and under consistent conditions of hydration. If you do not
undress, always remove your socks or stockings,and be sure the soles of your feet are clean before stepping on the measuring
platform.Be sure that your heels are correctly aligned with the electrodes on the measuring platform. Don't worry if your feet appear
too large for the unit -accurate readings can still be obtained if your toes overhang the platform.
It is best to take readings at the same time of day. Try to wait about three hours after rising, eating, or hard exercise before taking
measurements.
While readings taken under other conditions may not have the same absolute values, they are accurate for determining the per-
centage of change as long as the readings are taken in a consistent manner. To monitor progress, compare weight and body fat
percentage taken under the same conditions over a period of time.
Note : An accurate reading will not be possible if
the soles of your feet are not clean, or if
your knees are bent or you are in a sitting
position.
Heels centered on
electrodes
Toes may overhang
measuring platform
Automatic shut-down function
The automatic shut-down function shuts off the power automatically in the following cases:
•If you interrupt the measurement process, the power will shut down automatically within 10 to 20 seconds, depending upon the
type of operation.
•If an extreme weight is applied to the platform.
•During programming, if you do not touch any of the keys or buttons within 60 seconds.*
•After you have completed the measuring process.
Note : If the power shuts off automatically, repeat the steps from “Setting and Storing Personal Data in Memory” (p.4).
You can switch the unit indication by using the switch on the back of the scale as shown in the figure.
Note : If weight mode is set to pounds or stone-pounds, the height programming mode will be automatically set to feet and inches.
Similarly, if kilograms is selected, height will be automatically set to centimetres.
Switching the weight mode Note : For use only with models containing the weight mode switch
Positioning the Monitor
Place the measuring platform on a hard, flat surface where there is minimal vibration to ensure
safe and accurate measurement.
Note : To avoid possible injury, do not step on the edge of the platform.
Handling Tips
This monitor is a precision instrument utilizing state-of-the-art technology.
To keep the unit in the best condition, follow these instructions carefully:
•Do not attempt to disassemble the measuring platform.
•Store the unit horizontally, and place it so that the buttons will not be pressed accidentally.
•Avoid excessive impact or vibration to the unit.
•Place the unit in an area free from direct sunlight, heating equipment, high humidity, or extreme temperature change.
•Never submerge in water. Use alcohol to clean the electrodes and glass cleaner (applied to a cloth first) to keep them shiny;
avoid soaps.
•Do not step on the platform when wet.
•Do not drop any objects onto the platform.
Preparations Before Use
Inserting the Batteries
Open the battery cover on the back of the measuring platform. Insert the supplied AA-batteries
as indicated.
Note : Be sure that the polarity of the batteries is set properly. If the batteries are incorrectly
positioned the fluid may leak and damage floors. If you do not intend to use this unit
for a long period of time, it is advisable to remove the batteries before storage.
Please note that the included batteries from factory may have decreased energy levels over time.
Features and Functions
6.Personal keys 7.Weight-Only Key
5.Arrow (Select) Buttons
Accessories
8.AA-Size Batteries (4)
1.Display Screen
2.Ball-of Foot Electrodes
3.Heel Electrodes
4.Set Buttons
Open as shown.
Direction of the batteries.

Product specificaties

Merk: Tanita
Categorie: Weegschaal
Model: InnerScan BC-590BT

Heb je hulp nodig?

Als je hulp nodig hebt met Tanita InnerScan BC-590BT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Weegschaal Tanita

Tanita

Tanita BC-333LE Handleiding

15 April 2024
Tanita

Tanita BC-532 Handleiding

9 December 2022
Tanita

Tanita HD-395 Handleiding

18 Juni 2023
Tanita

Tanita PW-630MA Handleiding

11 Juni 2023
Tanita

Tanita BC-530 Handleiding

14 December 2022
Tanita

Tanita BF-576 Handleiding

9 December 2022
Tanita

Tanita BF-522 Handleiding

21 Mei 2023
Tanita

Tanita BC-571 Handleiding

16 Mei 2023
Tanita

Tanita InnerScan BC-582 Handleiding

10 Mei 2023
Tanita

Tanita WB-100MA Handleiding

9 Mei 2023

Handleiding Weegschaal

Nieuwste handleidingen voor Weegschaal

Medel

Medel Diagnostic XXL Handleiding

18 November 2024
PCE Instruments

PCE Instruments PCE-CS 1T Handleiding

17 November 2024
Cardinal Detecto

Cardinal Detecto Sonaris Handleiding

17 November 2024
Kern

Kern MGC 100K-1 Handleiding

16 November 2024
Sencor

Sencor SBS 2507WH Handleiding

16 November 2024
Soehnle

Soehnle Style Sense Multi 300 Handleiding

16 November 2024
Ecomed

Ecomed PS-72E Handleiding

16 November 2024
Adler

Adler AD 8169 Handleiding

15 November 2024
Ade

Ade Nina BM 707 Handleiding

14 November 2024
Perel

Perel VTBAL405 Handleiding

14 November 2024