Sunbeam FC7500 Handleiding

Sunbeam Snijmachine FC7500

Lees hieronder de 📖 handleiding in het Nederlandse voor Sunbeam FC7500 (24 pagina's) in de categorie Snijmachine. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/24
Please read these instructions carefully
and retain for future reference.
MultiChopperâ„¢
Food Chopper
Instruction Booklet
FC7500
Contents
Important instructions – retain for
future use.
Sunbeam’s Safety Precautions 1
Features of your MultiChopperâ„¢ 2
Using your MultiChopperâ„¢ 4
Chopping Guide 6
Care and Cleaning 7
Recipes 8
1
If you have any concerns regarding the performance and use of your appliance,
please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.
Ensure the above safety precautions are understood.
SAFETY PRECAUTIONS FOR YOUR
SUNBEAM MULTICHOPPER FOOD CHOPPER.
• Always operate on a flat surface.
• Do not operate the appliance without the cover
in place.
• Do not remove the motor housing from the jug
while the blades are still in motion.
• Do not use the appliance continuously for more
than 30 seconds at a time with heavy loads.
• Use extreme care when handling blades as
they are extremely sharp.
• Do not blend hot ingredients.
Sunbeam’s Safety Precautions
Sunbeam is very safety conscious when
designing and manufacturing consumer products,
but it is essential that the product user also
exercise care when using an electrical appliance.
Listed below are precautions which are essential
for the safe use of an electrical appliance:
• Read carefully and save all the instructions
provided with an appliance.
• Always turn the power off at the power outlet
before you insert or remove a plug. Remove
by grasping the plug - do not pull on the cord.
• Turn the power off and remove the plug
when the appliance is not in use and before
cleaning.
• Do not use your appliance with an extension
cord unless this cord has been checked
and tested by a qualified technician or
service person.
• Always use your appliance from a power
outlet of the voltage (A.C. only) marked
on the appliance.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
• Children should be supervised to ensure that
they do not play with the appliance.
• The temperature of accessible surfaces may be
high when the appliance is operating.
• Never leave an appliance unattended while
in use.
• Do not use an appliance for any purpose
other than its intended use.
• Do not place an appliance on or near a hot gas
flame, electric element or on a heated oven.
• Do not place on top of any other appliance.
• Do not let the power cord of an appliance hang
over the edge of a table or bench top or touch
any hot surface.
• Do not operate any electrical appliance with
a damaged cord or after the appliance has
been damaged in any manner. If damage is
suspected, return the appliance to the nearest
Sunbeam Appointed Service Centre
for examination, repair or adjustment.
• For additional protection, Sunbeam
recommend the use of a residual current
device (RCD) with a tripping current not
exceeding 30mA in the electrical circuit
supplying power to your appliances.
• Do not immerse the appliance in water
or any other liquid unless recommended.
• Appliances are not intended to be operated
by means of an external timer or separate
remote control system.
• This appliance is intended to be used in
household or similar applications such as:
staff kitchen areas in shops, offices and
other working environments; farm houses; by
clients in hotels, motels and other residential
type environments; bed and breakfast type
environments.

Product specificaties

Merk: Sunbeam
Categorie: Snijmachine
Model: FC7500

Heb je hulp nodig?

Als je hulp nodig hebt met Sunbeam FC7500 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Snijmachine Sunbeam

Sunbeam

Sunbeam Café Series ES9600 Handleiding

6 Maart 2023
Sunbeam

Sunbeam FC7500 Handleiding

6 Januari 2023

Handleiding Snijmachine

Nieuwste handleidingen voor Snijmachine

Boss

Boss Slicer SL-2 Handleiding

30 November 2024
Philco

Philco PHFS 6100 Handleiding

30 November 2024
Livoo

Livoo MEN435 Handleiding

20 November 2024
Cecotec

Cecotec Rock'nCut Advance Handleiding

20 November 2024
Prowork

Prowork PFSG 180/1 Handleiding

19 November 2024
RGV

RGV Luxury Italia 275 S Handleiding

18 November 2024
RGV

RGV Luxury Italia 20 GL-R Handleiding

18 November 2024
RGV

RGV Luxury Italia 25 GL Handleiding

18 November 2024
RGV

RGV Luxury Italia 300 ES Handleiding

18 November 2024
RGV

RGV Luxury Italia 22 GL-R Handleiding

18 November 2024