Star Micronics mC-Print2 Handleiding
Star Micronics
Printer
mC-Print2
Lees hieronder de 📖 handleiding in het Nederlandse voor Star Micronics mC-Print2 (3 pagina's) in de categorie Printer. Deze handleiding was nuttig voor 209 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/3
Connecting a Tablet or PC to the Printer
Open the smartphone/tablet settings screen and select Bluetooth.
Bluetooth interface
Turn on Bluetooth.
Select the displayed device name (mC-Print2-XXXXX).
When “Connected” is displayed, pairing is completed.
mC-Print2-XXXXXmC-Print2-XXXXX
The device name that is displayed during pairing varies depending
on the product. It can be checked from ***Bluetooth Information***
[Dev Name] in the list that is printed at printer test printing. (For test
printing, turn power ON while holding down the FEED button.)
You will need:
• Commercially-available
LAN cable
Printer-side plug
Connect the LAN cable to the printer LAN connector
.
2
Connect the other plug to the connector of the router, hub, or other
LAN device .
Wired LAN interface
Image of connection
<MCP20B only>
DHCP is enabled by default for the wired LAN settings. To con-
tinually use the same IP address, set a static IP address before
use.
For the static IP address setting procedure, refer to the Online
Manual.
1
Easy Setup Guide
3-A Connecting an iOS terminal to the printer
Installing the Printer
This document explains the procedures for use of mC-Print2. Please store it carefully after reading it.
1 Installing the paper roll
4
5
3
2
1
2 Turning ON the main unit power
1
23
5
4
• MCP20
• MCP20B
www.star-m.jp/mcprint-app.html
mC-Print2 Utility Download
www.star-m.jp/mcprint2-oml.html
mC-Print2 Online Manual
What the utility can do
The utility can be used to change the settings of the printer and peripheral devices.
Examples) • Bluetooth pairing • memory switch changes, logo registration
• Bluetooth settings, LAN settings • Sample printing etc.
• Firmware update/diagnosis
● To use the utility, download it from the site at right.
● To perform setup using this manual, proceed to Step 1.
Introduction
Check the Supplied Accessories If any of the package contents are missing or damaged, contact the dealer where the
product was purchased. * Accessories vary depending on the region where the printer was purchased.
Printer
In Case of Trouble
If you experience trouble with the setup procedure, refer to the Online Manual.
Place the enclosed yer close to the printer and use it when necessary.
Pull the open lever and open the printer cover
.
Take the slack of the paper roll before paper setting, insert the paper roll
as shown in the illustration
.
Pull the end of the paper roll out straight and use both hands to
close the printer cover
.
Press the power button and conrm that the LED (blue) illuminates
.
Connect the the power cable to the AC adapter , and connect the
cable connector to the printer as shown in the illustration
. Insert the
plug into the outlet
.
Paper Roll
Easy
Setup Guide
Safety
Instructions
This Manual
Power Cable*AC Adapter
Flyer
(Q&A reference)
USB Cable*
Copyright © 2018 Star Micronics Co., Ltd. 80877991
Initializing the communication settings (For Bluetooth and Wired LAN Interface)
The operation to activate the setting is dierent
depending on the product model.
For MCP20, press and hold the FEED button .
For MCP20B, press the FEED button and se-
lect the type of communication setting to initial-
ize*, then press and hold the FEED button to
conrm.
*Flashing pattern table
Download the Mac CUPS driver or Linux CUPS driver.
For details, refer to the Online Manual.
4
1
3
2
If the communication connection is not success-
ful, follow the procedure below and initialize the
communication setting.
After initialization, perform connection again
starting from the beginning of 3-A, B, or D.
<Procedure>
Check that the printer power is OFF. Insert a
pen with a small tip or similar item and press the
RESET switch on the back . At the same time,
press the power switch on the front of the printer
until the POWER LED turns on (power ON) .
Keep pressing RESET switch until the Network
LED (green) on the front of the printer ashes .
3-B Connecting an Android terminal to the printer
The device name that is displayed during
pairing varies depending on the product.
It can be checked from ***Bluetooth In-
formation*** [Dev Name] in the list that
is printed at printer test printing. (For test
printing, turn power ON while holding
down the FEED button.)
USB interface
Open the smartphone/tablet Settings - Con-
nection screen an h.
Bluetooth interface
Turn on Bluetooth.
Select the displayed device name (mC-Print2-
XXXXX).
W is displayed
in mpleted.
Connect the USB cable to the printer USB
(Type B) connector .
You will need:
• Prepare a USB cable
a n d U S B a d a p t e r
according to the con-
nector shape of the
smartphone or tablet
that you use.
2
Printer-side plug
(Type B) Connect the LAN cable to the printer LAN
connector .
2
Connect the other plug to the connector of
the router, hub, or other LAN device .
Wired LAN interface
You will need:
• Commercially-available
LAN cable
Printer-side plug
Connect the other plug to the connector of
the smartphone/tablet .
3-C Connecting a Mac/Linux terminal to the printer
DHCP is enabled by default for the
wired LAN settings. To continually use
the same IP address, set a static IP ad-
dress before use.
For the static IP address setting proce-
dure, refer to the Online Manual.
◦ IOS is a trademark or registered trademark of Cisco Systems, Inc. in the United States and other countries, and is used based on a license. Lightning is a trademark of Apple Inc. ◦ Android is a trade-
mark of Google Inc. ◦ Mac is a trademark of Apple Inc. in the USA and other countries. ◦ Windows is a registered trademark of the U.S. Microsoft Corporation in the United States, Japan, and other
countries. ◦ The Bluetooth® word mark and logo are registered trademarks owned by Bluetooth SIG, Inc. ◦ For more details, refer to our company’s FAQ site (http://www.star-m.jp/faq/index.html).
3-D Connecting a Windows tablet or PC terminal to the printer
The device name that is displayed during
pairing varies depending on the product.
It can be checked from ***Bluetooth In-
formation*** [Dev Name] in the list that
is printed at printer test printing. (For test
printing, turn power ON while holding
down the FEED button.)
Connect the USB cable to the printer USB
(Type B) connector .
USB interface
2
Be sure to install the Windows driver be-
fore connecting the USB cable.
Connect the LAN cable to the printer LAN
connector .
Connect the other plug to the connector of
the router, hub, or other LAN device .
Wired LAN interface
You will need:
• Commercially-available
LAN cable
Connect the other plug to the connector of
the Windows tablet/PC .
DHCP is enabled by default for the
wired LAN settings. To continually use
the same IP address, set a static IP
address before use.
For the static IP address setting proce-
dure, refer to the Online Manual.
Open the Settings and select [Devices] -
[Bluetooth & other devices].
Turn on Bluetooth.
Bluetooth interface
After a few m
is unavailable” will be displayed, however
pairing is completed.
or
scanner].
When the device appears in “P
ners”, pairing is completed.
mC-Print2-XXXXXmC-Print2-XXXXX
2
Select the displayed device name (mC-Print2-
XXXXX) and click or tap [Add device].
You will need:
• Prepare a USB cable
and USB adapter ac-
cording to the connec-
tor shape of the tablet
or PC that you use.
Printer-side plug
(Type B)
Windows 10
*For procedures regarding Windows 7, 8, or 8.1,
refer to the Online Manual.
<MCP20B only>
<MCP20B only>
1
1
1
1
Initializing the wired LAN settings
Initializing the Bluetooth settings
Initializing the wired LAN and Bluetooth settings
www.star-m.jp/mac-cps.html
● Download the Mac CUPS driver
www.star-m.jp/linux-cps.html
● Download the Linux CUPS driver
www.star-m.jp/mcprint-wsw.html
Download the StarPRNT for
mCollection Windows driver
Installing the Windows driver
Download [mCollection Printer Software].
Extract the downloaded software and execute “Setup.exe”.
Follow the wizard instructions and complete software installation.
The Windows driver is included in the mCollection Printer Software.
The mCollection Printer Software can be used to congure the printer
settings and perform an operation test.
Printer-side plug
Product specificaties
Merk: | Star Micronics |
Categorie: | Printer |
Model: | mC-Print2 |
Kleur van het product: | Wit |
Ingebouwd display: | Nee |
Gewicht: | 800 g |
Breedte: | 96 mm |
Diepte: | 113 mm |
Hoogte: | 100 mm |
Soort: | POS-printer |
Ondersteunde mobiele besturingssystemen: | Android, Windows CE, iOS |
Bluetooth: | Nee |
USB-poort: | Ja |
Connectiviteitstechnologie: | Bedraad |
Ethernet LAN: | Ja |
Type stroombron: | AC |
Snelstartgids: | Ja |
Inclusief AC-adapter: | Ja |
Aantal USB 2.0-poorten: | 1 |
Aantal Ethernet LAN (RJ-45)-poorten: | 1 |
Duurzaamheidscertificaten: | ENERGY STAR |
Compatibele besturingssystemen: | Android, iOS, Windows and Linux |
Mac-compatibiliteit: | Ja |
Maximale resolutie: | 203 x 203 DPI |
Maximum roll diameter: | 50 mm |
USB-connector: | USB Type-B |
Printtechnologie: | Thermisch |
Standaard interfaces: | Ethernet, USB 2.0 |
Gemiddeld stroomverbruik tijdens printen: | 19.2 W |
Maximale print breedte: | 50.8 mm |
Printsnelheid (metrisch): | 100 mm/sec |
Code geharmoniseerd systeem (HS): | 84433210 |
Ondersteunde papierwijdte: | 58 mm |
Seriële interface: | Ja |
Snijder: | Ja |
Autocutter duurzaamheid: | 2 miljoen delen |
Dikte printermedia: | 0.053 - 0.075 µm |
Heb je hulp nodig?
Als je hulp nodig hebt met Star Micronics mC-Print2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Printer Star Micronics
5 Augustus 2024
5 Augustus 2024
7 Juli 2023
19 Juni 2023
16 Juni 2023
15 Juni 2023
15 Juni 2023
12 Juni 2023
6 Juni 2023
6 Juni 2023
Handleiding Printer
- Printer HP
- Printer Sony
- Printer Samsung
- Printer Xiaomi
- Printer Panasonic
- Printer Epson
- Printer LG
- Printer Huawei
- Printer Canon
- Printer Honeywell
- Printer Olympus
- Printer Toshiba
- Printer Xerox
- Printer Brother
- Printer Builder
- Printer D-Link
- Printer Dell
- Printer Digitus
- Printer Dymo
- Printer Epson 7620
- Printer Frama
- Printer Fujifilm
- Printer Fujitsu
- Printer Ibm
- Printer Intermec
- Printer Kodak
- Printer Kogan
- Printer Konica Minolta
- Printer Kyocera
- Printer Lenovo
- Printer Lexmark
- Printer Minolta
- Printer Mitsubishi
- Printer MSI
- Printer Nec
- Printer Paxar
- Printer Polaroid
- Printer Primera
- Printer Renkforce
- Printer Ricoh
- Printer Roland
- Printer Royal Sovereign
- Printer Sagem
- Printer Seiko
- Printer Sharp
- Printer Star
- Printer Thomson
- Printer Tomy
- Printer Toshiba TEC
- Printer Triumph-Adler
- Printer Velleman
- Printer Zebra
- Printer Oce
- Printer Oki
- Printer Olivetti
- Printer Olympia
- Printer CSL
- Printer Argox
- Printer DTRONIC
- Printer Metapace
- Printer Citizen
- Printer Nilox
- Printer Approx
- Printer Ultimaker
- Printer Custom
- Printer Bixolon
- Printer Brady
- Printer GoDEX
- Printer Testo
- Printer EC Line
- Printer Sawgrass
- Printer Pantum
- Printer DNP
- Printer TSC
- Printer Equip
- Printer StarTech.com
- Printer Fichero
- Printer GG Image
- Printer Posiflex
- Printer ZKTeco
- Printer Datamax-O'neil
- Printer Panduit
- Printer Dascom
- Printer HiTi
- Printer Vupoint Solutions
- Printer Elite Screens
- Printer Phoenix Contact
- Printer Colop
- Printer Raspberry Pi
- Printer Evolis
- Printer IDP
- Printer Fargo
- Printer Microboards
- Printer Tally Dascom
- Printer Nisca
Nieuwste handleidingen voor Printer
2 November 2024
23 Oktober 2024
22 Oktober 2024
15 Oktober 2024
26 September 2024
25 September 2024
24 September 2024
24 September 2024
24 September 2024
6 September 2024