SkyRC e680 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor SkyRC e680 (40 pagina's) in de categorie Batterij-oplader. Deze handleiding was nuttig voor 121 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/40
Multi-Chemistry Charger / Discharger / Power Supply
680
Instruction Manual
[Version 1.1]
Introduction
Special Features
Warning and Safety Notes
Program Flow Chart
Explanation of Buttons
Power and Battery Connection
Charge Operation
Lithium Battery Program (LiPo/LiFe/Lilon/LiHV)
NiMH/NiCd Battery Program
Pb Lead-acid Battery Program
Dji Mavic Battery Program
DC Power Supply
Battery Memory Set and Call Out
System Setting
Battery Voltage Meter
Battery Resistance Meter
Warning and Error Message
The Set Contains
Recommended Accessories
Specification
Conformity Declaration
Commonly Used Terms
Warranty and Service
01
03
05
08
09
10
12
13
16
20
23
24
25
27
29
30
31
32
33
34
35
36
37
Table of Contents
This charger is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the charger.
Do not recharge non-rechargeable batteries!
During charging, the battery must be placed in a well-ventilated area!
Never leave the charger unattended when charging the battery.
WARNING:
Congratulations on your choice of SKYRC e680 Multi-Chemistry
Charger/Discharger/Power Supply. This unit is simple to use, but the
operation of a sophisticated automatic charger such as SKYRC e680
does require some knowledge on the part of the user. These operating
instructions are designed to ensure that you quickly become familiar with
its functions. It is therefore important that you read right through the
Operating Instructions, Warning and Safety Notes before you attempt to
use your new charger for the first time. We hope you have many years of
pleasure and success with your new battery charger.
SkyRC e680 is a high-performance, micro processor control charge /
discharge / power supply with battery management suitable for use with
all current battery types. It is with integral equalizer for six-cell Lithium-
Polymer (LiPo), Lithium iron phosphate (LiFe), Lithium-ion (LiIon) and
Lithium High Voltage (LiHV) battery with max. 8A charge current and 80W
charge power. For PB battery, e680 adds AGM and cold charge modes. It
can charge AGM battery, and Pb battery can be charged in cold charge
mode in cold days.
This charger can be powered by 11-18V DC or 100-240V AC power
source via the built in switch-mode power supply. Besides that, e680 is
able to power DC equipment such as tire sander, LED pit light and motor
checker, etc. The new features and functions will be listed and explained
in detail in the following pages.
Please BE SURE to read these INSTRUCTIONS, WARNING and
SAFETY NOTES before you use the charger for the first time.
Introduction
01 ·e680
Mishandling batteries and battery
chargers is extremely dangerous,
which may cause fire and explosion.


Product specificaties

Merk: SkyRC
Categorie: Batterij-oplader
Model: e680
Kleur van het product: Black, Blue
Ingebouwd display: Ja
Gewicht: 309 g
Type stroombron: AC, DC
Ondersteund aantal accu's/batterijen: 1
Certificering: CE, FCC
Display technologie: LCD
Ingangsspanning: 11 - 240 V
Oplaadspanning: 2.4-13.05 V
Stroomspanning bescherming: Oververhitting
Spanning: 13.8 V
Compatibele batterij technologiën: Lithium Iron Phosphate (LiFePo4), Lithium Polymer (LiPo), Lithium-Ion (Li-Ion), Nickel-Cadmium (NiCd), Nickel-Metal Hydride (NiMH), Sealed Lead Acid (VRLA)
Laadstroom: 8 A

Heb je hulp nodig?

Als je hulp nodig hebt met SkyRC e680 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Batterij-oplader SkyRC

Handleiding Batterij-oplader

Nieuwste handleidingen voor Batterij-oplader