Shelly 3EM Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Shelly 3EM (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 147 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
INITIAL INCLUSION
Before installing/mounting the Device ensure that the grid is
powered off (turned down breakers). Connect Shelly 3EM to the
power grid and install it in the breakers box following the scheme
that suites the desired purpose.
You may choose if you want to use Shelly with the Shelly Cloud
mobile application and Shelly Cloud service. You can also famil-
iarize yourself with the instructions for Management and Control
through the embedded Web interface.
CONTROL YOUR HOME WITH YOUR VOICE
All Shelly devices are compatible with Amazon Echo and Google
Home. Please see our step-by-step guide on:
https://shelly.cloud/compatibility/
THE MOBILE APPLICATION - SHELLY CLOUD
Shelly Cloud gives you opportunity to control and adjust all
ShellDevices from anywhere in the world. You only need an
internet connection and our mobile application, installed on your
smartphone or tablet. To install the application please visit Goo-
gle Play or App Store and install the Shelly Cloud app.
Registration
The rst time you load the Shelly Cloud mobile app, you have to
create an account which can manage all your Shelly® devices.
Forgotten Password
In case you forget or lose your password, just enter the e-mail
address you have used in your registration. You will then receive
instructions to change your password.
WARNING! Be careful when you type your e-mail address
during the registration, as it will be used in case you forget your
password. After registering, create your rst room (or rooms),
where you are going to add and use your Shelly devices.
Shelly Cloud gives you opportunity to create scenes for au-
tomatic turning on or off of the Devices at predened hours
or based on other parameters like temperature, humidity,
light etc. (with available sensor in Shelly Cloud). Shelly
Cloud allows easy control and monitoring using a mobile
phone, tablet or PC.
Device Inclusion
To add a new Shelly device, connect it to the power grid
following the Installation Instructions included with the
Device.
Step 1 - After the installation of Shelly in the breakers boxand
the power is turned on Shelly will create its own WiFi Access
Point (AP).
WARNING! In case the Device has not created its own WiFi
network with SSID like shellyem3-35FA58 check if you have con-
nected Shelly correctly by the schemes described above. If you do
not see an active WiFi network with SSID like shellyem3-35FA58,
reset the Device. In order to reset the device, you will need physical
access to it. On the front of the device, you will see a button. Press
and hold it for 10 seconds. Shelly should return to AP Mode. If
not, please repeat or contact our customer support at: support@
shelly.cloud
Step 2 - Choose Add Device”. In order to add more Devices
later, use the app menu at the top right corner of the main screen
and click Add Device”. Type the name (SSID) and password for
the WiFi network, to which you want to add the Device.
Step 3 - WiFi network inclusion
If using press the home button of your iPhone/iPad/iPod. iOS
Open Settings > WiFi and connect to the WiFi network created by
Shelly, e.g. shellyem3-35FA58.
If using your phone/tablet will automatically scan and Android
include all new Shelly Devices in the WiFi network that you are
connected to.
Upon successful Device Inclusion to the WiFi network you will
see this pop-up:
Step 4 - Approximately 30 seconds after discovery of any new
Devices оn the local WiFi network, а list will be displayed by de-
fault in the “Discovered Devices” room.
Step 5 - Enter Discovered Devices and choose the Device you
want to include in your account.
Step 6 - Enter a name for the Device (in the Device Name eld).
Choose a Room, in which the Device has to be positioned. You
can choose an icon or add a picture to make it easier to recog-
nize. Press “Save Device”.
Step 7 - To enable connection to the Shelly Cloud service for
remote control and monitoring, press “YES” on the following
pop-up.
Shelly Devices Settings
After your Shelly device is included in the app, you can
control it, change its settings and automate the way it
works. To switch the relay of the Device on and off, use the
respective Power button. To enter at the Details menu of
the respective Device, simply click on its name. From the
details menu you may control the Device, as well as edit its
appearance and settings.
Details menu
Here you will see the momentary:
Consumption - in Watts
Voltage -in Volts
Reactive power – in Volt-Ampere Reactive (VAR)
Power Factor in the range of -1 to 1 Below that you will see
the history graph for the last year for:
Consumption*
Voltage –with a lowest and highest measurement
*If you have connected your solar panel to Shelly 3EM, it will be
shown in green color.
SETTINGS
Timer
Manage the power supply automatically
Auto OFF: After turning on, the power supply will automatically
shutdown after a predened time (in seconds). A value of 0 will
cancel the timer.
Auto ON: After turning off, the power supply will be automati-
cally turned on after a predened time (in seconds). A value of 0
will cancel the timer.
Weekly Schedule
This function requires an internet connection.
Shelly receives actual information about the time of sunrise
and sunset in your area. Shelly may turn on/off automati-
cally at a predened time, at sunrise/sunset, or at a speci-
ed time before or after sunrise/sunset.
Internet/Security
WiFi Mode - Client: Allows the device to connect to an avail-
able WiFi network. After typing the details in the respective elds,
press Connect.
WiFi Client Backup: Allows the device to connect to an alterna-
tive WiFi network, if the primary is not available. After typing the
details in the respective elds, press Set.
WiFi Mode - Access Point: Congure Shelly to create a Wi-
Fi Access point. After typing the details in the respective elds,
press Create Access Point.
Cloud: Enable or Disable connection to the Cloud service.
Restrict Login: Restrict the web interface of Shely with a Us-
ername and Password. After typing the details in the respective
elds, press Restrict Shelly.
Settings
Power On Default Mode - This sets the default output state
when Shelly is powered.
- ON: Congure Shelly to turn ON, when it has power.
- OFF: Congure Shelly to turn OFF, when it has power.
- Restore Last Mode: Congure Shelly to return to last state it
was in, when it has power.
Firmware Update - Update the rmware of Shelly, when a new
version is released.
Time Zone and Geo-location - Enable or Disable the automatic
detection of Time Zone and Geo-location.
Factory Reset - Return Shelly to its factory default settings.
Device Information - Here you can see the:
- Device ID - Unique ID of Shelly
- Device IP - The IP of Shelly in your Wi-Fi network
- Device Type – The type of your Shelly device
- WiFi Name the Name (SSID) of the WiFi network to which
your Shelly is connected
- WiFi Signal - the Signal strength of the WiFi network to which
your Shelly is connected
Edit Device
From here you can edit:
Device Name
Device Room
Device Picture
When you are done, press Save Device. Some of the fea-
tures of the Shelly Cloud mobile application are available at
https://my.shelly.cloud/ as well.
THE EMBEDDED WEB INTERFACE
Еven without the mobile app, Shelly can be set and controlled
through a browser and WiFi connection of a mobile phone, tablet
or PC.
Abbreviations Used:
Shelly-ID the unique name of the Device. It consists of 6
or more characters. It may include numbers and letters, for ex-
ample 35FA58.
SSID the name of the WiFi network, created by the Device,
for example shellyem3-35FA58.
Access Point (AP) the mode in which the Device creates
its own WiFi connection point with the respective name (SSID).
Client Mode (CM) the mode in which the Device is connect-
ed to another WiFi network.
Installation/Initial inclusion
Step 1 - Install Shelly to the power grid following the schemes
described above and place it into the console. After turning the
power on Shelly will create its own WiFi network (AP).
WARNING! In case the Device has not created its own WiFi
network with SSID like shellyem3-35FA58 check if you have con-
nected Shelly correctly by the schemes described above. If you do
not see an active WiFi network with SSID like shellyem3-35FA58,
reset the Device. In order to reset the device, you will need physical
access to it. On the front of the device, you will see a button. Press
and hold it for 10 seconds. Shelly should return to AP Mode. If not,
please repeat or contact our customer support at:
support@shelly.cloud
Step 2 - When Shelly has created an own WiFi network (own
AP), with name (SSID) such as shellyem3-35FA58. Connect to it
with your phone, tablet or PC.
Step 3 - Type 192.168.33.1 into the address eld of your
browser to load the web interface of Shelly.
General - Home Page
This is the home page of the embedded web interface.
Here you will see information about:
Total electrical consumption of all channels
Current electrical consumption, Voltage, Reactive power and
Power Factor of Channel A
Current electrical consumption, Voltage, Reactive power and
Power Factor of Channel B
Current electrical consumption, Voltage, Reactive power and
Power Factor of Channel C
Power Button
Connection to Cloud
Present time
Settings
Shelly 3EM can store in his internal memory history for 365 days.
You can download it in .xml format by clicking the download but-
ton next to the channel info.
Internet/Security
WiFi Mode - Client: Allows the device to connect to an available
WiFi network. After typing the details in the respective elds,
press Connect.
WiFi Client Backup: Allows the device to connect to an alterna-
tive WiFi network, if the primary is not available. After typing the
details in the respective elds, press Set.
WiFi Mode - Access Point: Congure Shelly to create a Wi-
Fi Access point. After typing the details in the respective elds,
press Create Access Point.
Restrict Login: Restrict the web interface of Shelly with a Us-
ername and Password. After typing the details in the respective
elds, press Restrict Shelly.
SNTP Server: You can change the default SNTP server. Enter
the address, and click Save.
Advanced - Developer Settings: Here you can change the ac-
tion execution:
- Via CoAP (CoIOT)
- Via MQTT
Cloud: Enable or Disable connection to the Cloud service.
Settings
Power On Default Mode - This sets the default output state
when Shelly is powered.
- ON: Congure Shelly to turn ON, when it has power.
- OFF: Congure Shelly to turn OFF, when it has power.
Restore Last Mode - Congure Shelly to return to last state it
was in, when it has power.
Firmware Update - Update the rmware of Shelly, when a new
version is released.
Time Zone and Geo-location - Enable or Disable the automatic
detection of Time Zone and Geo-location.
Set Date/Time - You can manually set the Date and time for
your Shelly device.
Factory Reset - Return Shelly to its factory default settings.
Device Reboot - Reboots the Device.
Device Info - Shows your device ID.
In Client Mode shows also your WiFi network name and WiFi
signal strength.
Description of Shelly 3EM values:
1. Power Consumption - This is the power which is actually con-
sumed or utilized in an AC Circuit. It is also called True power,
Active power or Real power. It is measured in kilowatt (kW) or
megawatt (MW). It is the actual outcome of the electrical system
which runs the electric circuits or loads. This is the energy which
you are paying. It is shown separately with individual colors for
each phase, in the history graph. If you have solar panel and sell
energy, you will see this power with “negative” value. It is shown
in green color in the history graph.
2. Reactive power - This is the power that ows back and forth,
it moves in both the direction in the circuit or react upon itself.
The Reactive power is measured in Volt-Ampere reactive (VAR),
Kilo Volt-Ampere reactive (VAR) or Mega Volt-Ampere reactive
(MVAR). You are not being charged for this energy.
3. Power Factor - The power factor of an AC electrical circuit is
dened as the ratio of the real power absorbed by the load to
the apparent power owing in the circuit, and is a dimensionless
number in the closed interval of −1 to 1. A power factor of less
than 1 indicates the voltage and current are not in phase, reduc-
ing the instantaneous product of the two. In a perfect situation
the Power Factor is close to 1.
4. Voltage - Voltage, also called electromotive force, is a quan-
titative expression of the potential difference in charge between
two points in an electricaleld.
You can download your history by going to
https://my.shelly.cloud/ in a browser on a PC.


Product specificaties

Merk: Shelly
Categorie: Niet gecategoriseerd
Model: 3EM
Kleur van het product: Grijs
Ingebouwd display: Nee
Soort: Elektronisch
Type stroombron: AC
Meetfuncties: Power factor, Power output, Voltage
Wifi: Ja
Toepassing: Huishoudelijk

Heb je hulp nodig?

Als je hulp nodig hebt met Shelly 3EM stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Shelly

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd