Sharper Image RC Gravity Rover Handleiding

Sharper Image Radiografisch bestuurbaar speelgoed RC Gravity Rover

Lees hieronder de 📖 handleiding in het Nederlandse voor Sharper Image RC Gravity Rover (1 pagina's) in de categorie Radiografisch bestuurbaar speelgoed. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

Printed in China

1-800-374-2744

FOR TECHNICAL SUPPORT, PLEASE CALL

1. Turn the power knob on the remote clockwise and ﬂip the power switch on the vehicle to ON. The

remote pair light and orange vehicle lights will pulse. They will turn solid when paired.

Note: Do not touch rover while its blades are spinning.

2. Control the vehicle using the remote control pads. The left pad controls the left wheels and the

right pad controls the right wheels. Push both pads up to go forward and down to go backward.

3. When ready to climb the wall, engage the Gravity Drive by pressing and holding the button on the

remote down for 2 seconds. The blades will begin rotating. You can now climb on the walls or ceiling.

4. To turn o the Gravity Drive, press and hold the button on the remote down for 2 seconds. Make

sure the vehicle is on the ground before to avoid the vehicle falling and becoming damaged.

5. In the event of an emergency, the Gravity Drive can be disengaged immediately by double tapping

the Gravity Drive ON/OFF button.

6. When the battery is low, the Gravity Rover lights will ﬂash and the remote will beep. Drive the

vehicle to ground level to avoid unnecessary damage caused by a fall from the ceiling or walls.

1. If your vehicle is having trouble climbing or maneuvering on the walls or ceiling after a full charge,

your tires could be cleaned to improve traction. Wipe your tires with a slightly damp soft cloth to

remove surface dust and dirt.

2. If your Gravity Rover is malfunctioning due to a crash or fall, please follow these tips to restore

your vehicle to working condition:

a. The small gear between the wheels may

come out of alignment. Carefully press the

gear back into place so the gear teeth

mesh with the wheel gear teeth.

b. If the tires come loose or o, you can

reinstall them on to the wheels.

To charge the Gravity Rover, insert the USB-C cable (included) into the port on the

vehicle. Insert the other end into an AC wall adapter (not included). The battery takes

approximately 100 minutes to charge fully. The red indicator light on the bottom of

the rover will become dim when fully charged.

• Do not mix old and new batteries.

• Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.

• Alkaline batteries are recommended. Use only the speciﬁed voltage.

• Insert batteries using the correct polarity. Always use, replace, and recharge (if

applicable) batteries under adult supervision.

• Do not short-circuit the battery supply terminals.

• Do not dispose of batteries in ﬁre, batteries may explode or leak.

• Remove batteries before storing.

• Recycle or dispose of batteries according to federal, state, and local laws.

• Keep these instructions for future reference.

BATTERY WARNING

RECHARGEABLE BATTERY WARNING

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1)This device may not cause harmful interference, and

2)This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

KEEP THIS INSTRUCTION MANUAL AS IT CONTAINS IMPORTANT INFORMATION FOR FUTURE REFERENCE

Due to continuous product improvements, the picture on the manual may dier slightlyfrom the actual product.

RC GRAVITY ROVER

TROUBLESHOOTING

Dust and Dirt Tires

USB-C

Charging

Port

• There is a risk of ﬁre and personal injury if battery is punctured, damaged, or misused

• Do not dismantle, crush, incinerate or short-circuit battery.

• Never expose battery to extreme temperatures or moisture.

• Keep away from ﬂammable materials and direct sunlight.

• Only charge using the provided charger, cable, and/or adapters.

• Rechargeable battery is only to be charged by an adult.

• Adult Supervision of the battery while it is charging is required.

• Allow battery to cool to room temperature before charging.

• Charge on a non-ﬂammable surface and keep away from ﬂammable products.

• Discontinue charging if battery becomes hot, swells, smokes, or gives o a strong odor.

• Battery chargers used with the product are to be regularly examined for damage to the cord, plug, enclose, and

other parts, and in the event of such damage, they must not be used until the damage has been repaired.

• Recycle or dispose of battery according to federal, state, and local laws.

• Keep these instructions for future reference.

• Adult supervision is required.

• The Gravity Drive blades rotate at a very high rate of speed. When they blades are on, do NOT place your

hand, face, or any extremity near the vehicle. Once the Gravity Drive is disengaged and the blades have

stopped rotating, you can handle the vehicle.

• Not for children under 8 years of age.

• Do not use people or animals as obstacles.

• For indoor use only.

• Never operate your vehicle in inclimate weather, rain, or standing water.

• Keep ﬁngers, hair and loose clothing away from wheels while vehicle is in motion.

• Do not expose to extreme temperatures and moisture.

• Do not leave vehicle or transmitter near sources of heat or under direct sunlight for long periods of time.

• Thoroughly inspect products before every use. If the product appears worn, frayed/splintered, cracked, or

broken in any manner, discontinue use and discard immediately.

• IMPORTANT! The RC Gravity Rover is an indoor vehicle ONLY, intended for ﬂat surfaces such as ﬂoor,

walls, windows, and ceilings. Do NOT play with the Gravity Rover outdoors.

SAFETY WARNINGSPLAY

Clean Tires

CONTENTS AND BATTERY INSTALLATION

Contents

Gravity Rover Vehicle

USB-C charging cable

Remote Control

Safety Cage (installed on Gravity Rover)

Replacement blades x 4

Battery Installation

The vehicle requires 1 3.7V 550mAh rechargeable lithium battery

(included) and the remote requires 4 AA 1.5V batteries (not included).

Use a Phillips head or Cross screwdriver to loosen the screw securing

the battery cover on bottom of the remote. Insert the batteries, ensuring

the correct polarity. Replace the battery cover and tighten the screw.

OFF

Power Knob

Left Wheels Right Wheels

Gravity Drive

ON/OFF

Status Light

c. The gear connecting rod can become

deformed. It is ﬂexible and can be gently

shaped back into place.

d. The blades can become stuck in the Gravity

Rover shell openings. As the blades and

shell are ﬂexible, the shell can be gently

ﬂexed outward to free the blade to rotate.

e. The blades can sometimes become

damaged at the ends which can impact the

performance. If your blades look chipped,

bent, or broken, you can replace them with

the replacement blades included. First,

remove the safety cage. Next, remove the

damaged blades by pulling them at the

center until it comes o of the motor stem.

Replace the front blade (closest to the

orange screen) with the blade marked “A”

and the back blade (closest to the SI 77

logo) with the blade marked “B”. Push the

blade down on to the motor stem until it

reaches the bottom for both blades. Finally,

replace the safety cage.

Warning: Changes or modiﬁcations to this unit not expressly approved by the party responsible for compliance could

void the user's authority to operate the equipment.

Model No.: 1014117

SI logo (BACK)

Orange screen (FRONT)

Product specificaties

Merk:	Sharper Image
Categorie:	Radiografisch bestuurbaar speelgoed
Model:	RC Gravity Rover

Heb je hulp nodig?

Als je hulp nodig hebt met Sharper Image RC Gravity Rover stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Radiografisch bestuurbaar speelgoed Sharper Image

Sharper Image Space Blaster Shooting Game Handleiding

26 November 2024

Sharper Image Shadow Fighter Handleiding

26 November 2024

Sharper Image Pocket Video Drone Handleiding

26 November 2024

Sharper Image RC Gravity Rover Handleiding

26 November 2024

Sharper Image Virtual Pong Handleiding

25 November 2024

Handleiding Radiografisch bestuurbaar speelgoed

Nieuwste handleidingen voor Radiografisch bestuurbaar speelgoed

Spektrum DX5 Pro Handleiding

16 November 2024

Hobbywing XeRun XR10 PRO DR Handleiding

6 November 2024

Hobbywing XeRun XR10 Pro G3 Handleiding

5 November 2024

Amewi Hyper Go Handleiding

30 September 2024

Carson Drift Burner Handleiding

30 September 2024

Carson Micro X-Warrior 2.0 Handleiding

30 September 2024

Carson Toxic Spider 340 Handleiding

30 September 2024

Hobbywing XeRun XR10 Pro WP Handleiding

24 September 2024

Hobbywing XeRun XR10 Stock Spec G2 Handleiding

24 September 2024

Hobbywing XeRun XR10 Justock G3S Handleiding

24 September 2024