Scott DJX 100 TT Handleiding

Scott Mengpaneel DJX 100 TT

Lees hieronder de 📖 handleiding in het Nederlandse voor Scott DJX 100 TT (7 pagina's) in de categorie Mengpaneel. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/7

USER MANUAL

www.my-scott.com

DJX 100 TT / VINYL ENCODER 10

PROFESSIONAL USB TURNTABLE

GB-2

USER MANUAL

Vinyl Encoder 10

SAFETY INSTRUCTIONS

1. Read these Instructions.

2. Keep these Instructions.

3. Heed all Warnings.

4. Follow all Instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in accordance with the manufacture’s

instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9. Do not try to bypass the safety purpose of the polarized plug. The wide blade is provided for your

safety. If the provided plug does not fit into your wall outlet, consult an electrician for replacement of

the obsolete outlet.

10. Prevent the power cord from being walked on or pinched particularly at plug, convenience

receptacles, and point where from the power cord is connected to the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or

sold with the apparatus. When a cart is used, exercise caution when moving the

cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lighting storms or when unused for long periods of

time.

14. Refer all servicing to qualified service personnel. Serving is required when the apparatus has been

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled into

the apparatus or objects have fallen into it, the apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

15. The mains plug is used to unplug the device, so it must remain easily accessible.

WARNING

To reduce the risk of the fire or electric shock, do not expose this apparatus to rain or moisture.

The apparatus shall not be exposed to dripping or splashing and that no objects ﬁlled with liquids,

such as vases, shall be placed on the apparatus.

CAUTION

DO NOT OPEN

RISK OF ELECTRIC SHOCK

CAUTION: To reduce the risk of electric shock, do not remove any cover. No user-serviceable parts

inside.

Refer servicing to qualified service personnel only.

The lightning flash with an symbol within the equilateral triangle is intended to alert the use to the

presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufﬁcient

magnitude to constitute a risk of electric shock.

The exclamation mark within the equilateral triangle is intended to alert the user to the presence of

important operation and maintenance (servicing) instructions in the literature accompanying this

appliance.

CAUTION

To prevent any risk of electric shock, ensure that the blades of the polarized plug can be fully inserted,

in order to prevent blade exposure.

GB-3

UNPACKING THE BOX

Before you begin assembly, please be sure all parts and accessories have arrived intact. In order to

do so, please use the check list below:

* Instruction manual * RCA cable * Slipmat * Platter

* 45rpm adaptor * Headshell * AC cord * Counterweight

Note:

* Do not connect the AC power plug before assembly has been completed.

* Before turning the power on, make sure once again all the connections and power voltage that

settings are correct.

Always turn off the power when connecting or disconnecting

* Read this manual carefully before using the unit. Be sure to store the manual in a safe place for

future reference.

* Attach a stylus cartridge to the headshell before assembling the turntable unit

1. Unpacking:

Carefully remove the main unit with the packaging material intact from the box. Remove the

packaging material once the unit has been removed from the shipping carton. Be sure to

identify all the accessories located in the packaging material.

2. 45 rpm adaptor

Locate and remove the 45 rpm adapter from the packaging material and place it in the cut out

designed for this purpose on the top of the main unit.

3. Turntable platter:

Remove the turntable platter from the packaging material and gently insert the platter into the

center spindle on the base of the turntable unit.

4. Drive hub:

Pull the belt to the lower side of the turntable over the drive hub.

5. Slipmat:

Remove the black slipmat from the packaging and place it on the platter.

6. Headshell:

Insert the headshell into the front end of the tone arm. While holding headshell ﬁrmly onto the front

end of the tone arm, turn the headshell locking nut counterclockwise to firmly secure the headshell

to the tone arm.

7. Counterweight:

Product specificaties

Merk:	Scott
Categorie:	Mengpaneel
Model:	DJX 100 TT
Gewicht:	3800 g
Beeldscherm:	Nee
Aantal USB 2.0-poorten:	1
Meegeleverde software:	Magix Cleaning Lab
Frequentiebereik:	20 - 20000 Hz
Aantal kanalen:	1 kanalen
Afmetingen (B x D x H):	449 x 370 x 145 mm
Stroomverbruik (typisch):	9 W
Digitaal geluid verwerken:	- Bit
Booth out (RCA):	1
Line Signal-to-Noise Ratio (SNR):	60 dB
Channel fader (1kHz):	2.5 dB