Saramonic SR-PAX1 Handleiding

Saramonic Niet gecategoriseerd SR-PAX1

Lees hieronder de 📖 handleiding in het Nederlandse voor Saramonic SR-PAX1 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
❶ Battery compartment
Operates on a 9 volt battery (not included). You could use a
lithium type battery for longer operating time.
❷ For microphone: two balanced XLR inputs.
For guitar: two 1/4" (6.35mm) mono standard inputs.
❸ Left and right mono 1/8" (3.5 mm) mini-Jack inputs.
❹ Stereo 1/8" (3.5 mm) mini-Jack input.
❺ Dual Trim Control Knobs
Adjust the signal of each channel to the optimum recording levels.
❻ Left Channel Control Button
Control the inputs of left channel. Select LINE or MIC or Phantom
level for the left channel.
❼ Right Channel Control Button
Control the inputs of right channel. Select LINE or MIC or Phantom
level for the right channel.
❽ Mono/Stereo Button (M/S)
When recording one channel, please use the mono(M) setting. The
signal will be sent to both left and right channels. When recording
two channels, please use the stereo(S) setting. The level of each
channel can be controlled individually.
❾ Power Button
Main power switch for SR-PAX1.
❿ Output (OUT)
Stereo 1/8" (3.5 mm) output jack. Use the included signal
transmission line to send the audio signal from the adapter to your
camera.
3.5mm Headphone Output for Monitoring
Lock Knob
Product trod t In uc ion
G rene al Intro c sdu tion
The Saramonic SR-PAX1 is a two-channel audio mixer with phantom
power, specially designed for mirrorless digital camera, DSLR camera and
camcorder with a microphone jack. It is a compact and lightweight mixer
ideal for recording professional quality audio from two sources and mixing
them into your camera.
With two sets of inputs, the SR-PAX1 accepts signals from a wide variety
of mic or line level sources such as balanced XLR microphones, wireless
microphones, guitars, or any musical instruments with a 6.35mm
connector. The 3.5mm inputs are also ideal for connecting audio devices
with a 3.5mm output such as a smart phone or an MP3 player. The input
levels of each channel can be easily controlled with the dual control knobs.
A phone jack allows you to monitor the audio in real time. The SR-PAX1
makes your recording work much easier.
Prod t cuc Stru ture
Set Up Guide
① Install the battery.
Lift up and pull out the drawer from the battery compartment.
Insert 9V battery into place aligning + and - polarity as shown.
Slide the drawer closed until it clicks into place.
② Mount the SR-PAX1 on your camera’s hot shoe. Spin counter-clockwise
to tighten up the mixer with the camera. Or mount the mixer to a
tripod with the tripod socket on the bottom of the mixer.
③ Connect the supplied signal transmission line from the output jack
(OUT) of mixer to the MIC input of camera. If there is a Mic/ Line switch
on the camera, select it to Mic.
④ Connect microphones to the XLR inputs or 3.5mm inputs, or other
audio sources to the 6.35mm inputs.
⑤ Long press the power button to turn on the SR-PAX1.
⑥ Set the LINE/MIC/PH buttons.
When using self-powered microphones and wireless systems, set to
MIC for microphone.
When using guitar or other audio devices, please set to LINE.
When using microphones operating on phantom power, please set to
PH for phantom power. 5 volt phantom power is offered for 3.5mm
microphone jacks and 48 volt phantom power is offered for XLR jacks.
Specification
Input
Output
Phone
Frequency Response
THD
SNR
L & R Gain
Phantom Power
Power Indicator
Power Requirements
Weight
Dimensions
XLR & 6.3mm jacks x2
1 /8" (3.5 mm) jacks x3
1/8" (3.5 mm) jacks x1
1/8" (3.5 mm) jacks x1
20 Hz to 20 Khz, +/-1 dB
Less than 0.01% @ 1 kHz, -30 dBu input
74dBu @ 1 kHz, -30 dBu input
LINE: -30dBu
MIC: 0dBu
MIC/PH: 0dBu
for XLR jacks: 48V power supplies
for 1/8" (3.5 mm) jacks: 5V power supplies
Power on: LED indicator in blue
Low battery: LED indicator in red
9 V alkaline or lithium battery (Not included)
357g
(L×W×H) 101.2mm × 85.0mm ×65.5mm
1/4” Female Screw hole
Standard Cold Shoe
Three Integrated Mounting Shoes
Attach a variety of microphones or other accessories.
www.saramonic.com
The Saramonic logo is trademark which is registered
and owned by Saramonic International.
COPYRIGHT 2011-2021 SARAMONIC INTERNATIONAL
( A brand of DSQN )
Email: info@saramonic.com
SR-PAX1
⑦ Set the M/S switch according to your needs. Please refer to Product
Structure ❽ Mono/Stereo Button.
⑧ Set the volume control knobs to low to avoid excessively loud audio
from damaging your hearing. Plug an headphone into the phone
jack to monitor the sound.
⑨ We suggest you to do a test recording and playback the audio to see if
it is acceptable. When testing, you could adjust the knobs flexibly to
get the the optimum signal levels.
Packing List
One SR-PAX1 main unit
One signal transmission line
User manual
Warranty card
NOTE: Please DO NOT set to PH when recording with microphones
that do not operate on phantom power, like wireless receivers,
mixing boards or any unbalanced device, because it may damage
both the mixer and audio device.
The SR-PAX1 is specially designed for mirrorless digital
camera, DSLR camera and camcorder with a microphone
jack. It is ideal for recording professional quality audio
from two sources and mixing them into your camera.
TWO-CHANNEL AUDIO
MIXER WITH PHANTOM POWER

Product specificaties

Merk: Saramonic
Categorie: Niet gecategoriseerd
Model: SR-PAX1

Heb je hulp nodig?

Als je hulp nodig hebt met Saramonic SR-PAX1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Saramonic

Saramonic

Saramonic SR-RF5M Handleiding

11 April 2024
Saramonic

Saramonic SR-MLP4 Handleiding

11 April 2024
Saramonic

Saramonic SmartRig UC Handleiding

11 Maart 2024
Saramonic

Saramonic SR-AX107 Handleiding

12 Mei 2023
Saramonic

Saramonic Blink500 Pro Handleiding

23 April 2023
Saramonic

Saramonic UwMic15 Handleiding

31 Maart 2023
Saramonic

Saramonic SmartMixer Handleiding

7 Maart 2023
Saramonic

Saramonic Blink 500 TX Handleiding

21 Februari 2023
Saramonic

Saramonic SR-PAX1 Handleiding

31 Januari 2023
Saramonic

Saramonic SR-AX101 Handleiding

22 Januari 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Lucide

Lucide Epice 08411/01/60 Handleiding

22 November 2024
Lucide

Lucide Xirax 09119/10/31 Handleiding

22 November 2024
Lucide

Lucide Galla 43408/40/31 Handleiding

22 November 2024
Lucide

Lucide Zych 45356/01/97 Handleiding

22 November 2024
Lucide

Lucide Garris 45450/50/97 Handleiding

22 November 2024
Lucide

Lucide Camus 45452/40/97 Handleiding

22 November 2024
Lucide

Lucide Raya led 45455/50/31 Handleiding

22 November 2024
Lucide

Lucide Molio 45457/01/31 Handleiding

22 November 2024
Lucide

Lucide Teun 45471/01/30 Handleiding

22 November 2024
Lucide

Lucide Damian 45473/36/97 Handleiding

22 November 2024