Salter 1406 nutri weigh slim Handleiding

Salter Keukenweegschaal 1406 nutri weigh slim

Lees hieronder de 📖 handleiding in het Nederlandse voor Salter 1406 nutri weigh slim (65 pagina's) in de categorie Keukenweegschaal. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/65
Nutri-Weigh Slim
Nutritional Scale
Balance nutritionnelle
hrwertwaage
Balanza de Nutricn
Bilancia nutrizionale
Voedingsweegschaal
OPERATING INSTRUCTIONS & FOOD CODE TABLE
MODE D’EMPLOI ET TABLEAU DES CODES ALIMENTAIRES
BEDIENUNGSANLEITUNG UND LEBENSMITTELCODE-TABELLE
INSTRUCCIONES DE USO & TABLA DE CÓDIGOS DE ALIMENTOS
ISTRUZIONI D’USO E TABELLA DEI CODICI DEGLI ALIMENTI
HANDLEIDING EN TABEL MET VOEDSELCODES
E
3
GB
2
GB
The Salter Nutritional Scale is designed for precise measuring of ingredients or portions
and for monitoring the key nutritional values in your food.
(Fat, salt, cholesterol, carbohydrate, fibre, protein and calories)
This scale offers a complete database of nutritional information for 999 foods and
ingredients as listed in the McCance & Widdowsons Composition of Food Integrated
Dataset (COFIDS) Food Standards Agency.
It has a memory feature for up to 99 entries, which when recalled displays the total
accumulated calories/fat/salt etc. for all items stored. This enables the user
to keep track of nutritional values and calorie content over the course of a day.
All these features make this scale ideal for everyday use and dietry control purposes.
WARNINGS/DISCLAIMERS:
1. The information provided by this product should not be used for calculating
type or dose of medication.
2. Always consult a doctor or health professional before starting a weight loss or
exercise program.
3. The information provided by this product should always be used in
conjunction with professional dietary advice.
N
Nu
ut
tr
ri
it
ti
io
on
na
al
l
S
Sc
ca
al
le
e
E
BATTERY:
3 AAA
TO INSTALL BATTERY:
Insert the 3 AAA batteries into the battery compartment. Ensure the + and - terminals are the correct way round.
THE DISPLAY:
The diagram below explains the various features of the display.
SWITCH ON:
Press and release the ON/OFF key
TO SWITCH OFF:
Press and release the ON/OFF key
NOTE: Auto switch-off occurs if display shows 0.0 or the same weight reading
for approximately 3 minutes.
TIP: Using the ON/OFF key to switch the scale off after use will prolong the battery life.
TO CONVERT WEIGHT UNITS:
The scale measures in imperial (oz & lb:oz), metric (kg & g) and Aquatronic® liquid measurements (fl. oz & ml).
In weighing mode press and release the UNIT key to convert between g /oz/lb:oz/ml/fl.oz at any time.
NUTRITIONAL SCALE OPERATING INSTRUCTIONS
Units of weight
Food code
Weight
Total memory indicator
Memory indicator
Memory number
Low battery
indicator
Nutritional values
Σ
Note : Display shows blank if there
is no data for a particular nutritional value
for selected food.
5
GB
4
GB
NOTE: The Aquatronic® liquid measure feature is suitable for all water based liquids, including wine, milk, stock,
cream etc. Please be aware that oils have a lower specific gravity, which will result in a volume reading of approx.
+10%. If measuring oils by volume on this scale, please adjust for this accordingly.
TO WEIGH:
1) Press and release the ON/OFF key to turn the scale on
2) Wait until display shows 0.0
3) Place item to be weighed on the platform
4) Weight is displayed
TO ADD & WEIGH:
To weigh several different ingredients, press the ZERO key to reset the display between each ingredient.
NOTE: When weights have been tared out, the display will show a negative number when the items are removed
from the scale. To reset the scale back to zero for a new measurement, press the ZERO button.
TO DISPLAY NUTRITIONAL READINGS:
1) Press and release the ON/OFF key to turn the scale on
2) Place food item to be weighed on the platform.
3) Clear the food code if necessary by pressing and releasing the CLR keythe food code 000 is displayed.
4) Refer to the table in this manual and identify the 3 digit code for the food item being weighed
(e.g. 921 for honey).
5) Using the numerical keys (0 – 9) enter the 3 digit code
6) When the 3rd digit is pressed, the values for calories, salt, protein, fat, carbohydrates, cholesterol, and fiber for
the food item will all appear on the screen.
TO SAVE NUTRITIONAL VALUES TO MEMORY:
1) Follow steps 1 – 6 of the To Display Nutritional Readings section.
2) Press M+ key to add the food item being weighed to memory.
3) M01 will be shown at the upper left corner of the display to indicate that one set of values has been saved to
memory. To add additional food items to memory, repeat the previous steps.
NOTE: The memory is saved permanently, even if the scale is switched off except when the batteries are removed.
NOTE: The maximum number of food items that can be added to the memory is 99.
When the memory number reaches 99 the display will flash “99“ – the memory must be cleared by following the
instructions in the To Clear Memory’ section.
TO RECALL MEMORY:
1) Press MR key to see the total values for all of the food items stored to memory.
2) Σ is displayed next to the memory indicator to indicate that the total memory is being displayed.
3) The total values for calories, salt, protein, fat, carbohydrates, cholesterol, and fibre for the food items stored in
memory will all appear on the screen.
NOTE: It is not possible to display the total weight of the food items stored to memory.
TO CLEAR MEMORY:
1) Press the MR key.
2) Press the MC key.
3) The memory is cleared when the memory indicator and memory number are no longer displayed.
NOTE: the scale can only store up to 99 foods in memory. If over 99 items are stored, the display will flash “99”.
Press MC to clear the memory.
FUNCTION KEYS:
ON/OFF Switch scale on/off
ZERO Set weight to zero
M+ Save nutritional values to memory (up to a maximum of 99 values)
MR Recall the total nutritional values stored in memory
CLR Clear food code
MC Clear memory
UNIT Convert between g/oz/lb:oz/ml/fl.oz
NUTRITION KEYS:
cal Calorie content (cal) carb Carbohydrate content (g)
salt Salt content (mg) chol Cholesterol content (mg)
prot Protein content (g) fibr Fiber content (g)
fat Fat content (g)
NOTES FOR CLEANING/CARE:
Clean the scale with a slightly damp cloth.
DO NOT immerse the scale in water or use chemical/abrasive cleaning agent.
WARNING INDICATORS:
Replace battery
Weight overload
Nutritional value exceeds
maximum display limit


Product specificaties

Merk: Salter
Categorie: Keukenweegschaal
Model: 1406 nutri weigh slim

Heb je hulp nodig?

Als je hulp nodig hebt met Salter 1406 nutri weigh slim stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Keukenweegschaal Salter

Handleiding Keukenweegschaal

Nieuwste handleidingen voor Keukenweegschaal

Smeg

Smeg FS0104 Handleiding

21 November 2024
Taylor

Taylor TE22OS Handleiding

18 November 2024
Livoo

Livoo DOM431 Handleiding

15 November 2024
Primo

Primo SCK3 Handleiding

5 November 2024
Hyundai

Hyundai KVE 927 Handleiding

21 September 2024
Ufesa

Ufesa BC1100 Handleiding

11 September 2024
Ufesa

Ufesa BC1450 Handleiding

11 September 2024