Russell Hobbs Desire 20340-56 Handleiding

Russell Hobbs Snijmachine Desire 20340-56

Lees hieronder de 📖 handleiding in het Nederlandse voor Russell Hobbs Desire 20340-56 (48 pagina's) in de categorie Snijmachine. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/48
instructions 2
Bedienungsanleitung 4
mode d’emploi 6
instructies 8
istruzioni per l’uso 10
instrucciones 12
instruções 14
brugsanvisning 16
bruksanvisning (Svenska) 18
bruksanvisning (Norsk) 20
käyttöohjeet 22
инструкции (Русский) 24
pokyny (Čeština) 26
pokyny (Slovenčina) 25
instrukcja 30
upute 32
navodila 34
οδηγίες 36
utasítások 38
talimatlar 40
instrucţiuni 42
инструкции (Български) 44
47
2
Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all
packaging before use.
A IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
1 This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been supervised/instructed and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be done by children unless they are older
than 8 and supervised. Keep the appliance and cable out of reach
of children under 8 years.
2 If the cable is damaged, it must be replaced by the manufacturer,
its service agent, or someone similarly qualified, to avoid hazard.
H Don’t put the motor unit in liquid, don’t use the appliance in a bathroom, near water, or
outdoors.
3 Don’t put yout fingers inside the cutters.
4 Don’t use fingers or cutlery to push food down the tube – only the pusher.
5 Don’t use the appliance for any purpose other than those described in these instructions.
6 Don’t run the motor continuously for more than 10 minutes, it may overheat. After 10
minutes switch off for at least 10 minutes, to recover.
7 Unplug the appliance before fitting or removing attachments.
8 Don’t operate the appliance if it’s damaged or malfunctions.
household use only
C ASSEMBLY
1 Switch the appliance off ( ) and unplug it.0
2 Hold the tube, and turn the body till the hole is uppermost.
3 Lower one of the cutters into the hole, till it engages with the drive.
12
11
9
L
U
L
U
1 Y
0
L
U
1
6
7
10
8
11
67
3 4 5
1
9
9
2
`
`
`
` ` u
u
u
9
L
U
L
U
u
3
4 Align the ring nut with the bayonet fittings on the hole.
5 Turn the ring nut 10mm anti-clockwise, to lock the cutter into the body.
6 Turn the body till the tube is vertical.
7 Now turn it 45° clockwise, to engage the bayonet fittings inside the motor unit.
8 Turn it 45° anti-clockwise, to lock it in place.
BWARNING
Don’t put your fingers inside the cutters.
C IN USE
9 Cut the food to a shape that will go down the tube (45x35mm).
10 Put the plug into the power socket.
11 Move the switch: on off 1 0 Y pulse
Y 0In this position, the switch is spring-loaded. When you let go, it’ll return to .
12 Remove the pusher, and drop the ingredients down the tube.
13 Replace the pusher, and use it to push the ingredients gently down the tube.
C DISASSEMBLY
14 Switch the appliance off ( ) and unplug it.0
15 Turn the body 45° clockwise, to disengage the bayonet fittings, and pull it off the motor unit.
16 Turn the ring nut 10mm clockwise, to unlock it, and lift it of the body.
17 Tip the body up, so that the cutter drops out.
C JAMMING
18 Switch the appliance off ( ) and unplug it.0
, Dismantle the appliance, clean it, assemble it, and start again.
C CARE AND MAINTENANCE
19 Switch the appliance off ( ) and unplug it.0
20 Wipe the outside of the motor unit with a clean damp cloth.
21 Wash the removable parts in warm soapy water, rinse well, drain, and air dry.
` You may wash these parts in a dishwasher.
22 If you use a dishwasher, the harsh environment inside the dishwasher will affect the surface
finishes.
23 The damage should be cosmetic only, and should not affect the operation of the appliance.
C STORAGE
24 You may store two of the cutters in the spaces in the rear of the appliance.
C NOISE
25 If you find the appliance is noisy, the cutter may be rubbing against the ring nut.
26 Applying a little cooking oil to the inside of the ring nut before use should fix this.
WENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous substances in electrical and
electronic goods, appliances marked with this symbol mustn’t be disposed of with unsorted
municipal waste, but recovered, reused, or recycled.
diagrams
1 ring nut
2 cutters
3 slicer
4 coarse grater
5 fine grater
6 body
7 tube
8 cutter (rear)
9 bayonet fitting
10 pusher
11 switch
12 motor unit
` dishwasher safe
instructions

Product specificaties

Merk: Russell Hobbs
Categorie: Snijmachine
Model: Desire 20340-56

Heb je hulp nodig?

Als je hulp nodig hebt met Russell Hobbs Desire 20340-56 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Snijmachine Russell Hobbs

Russell Hobbs

Russell Hobbs 20346-56 Handleiding

20 Maart 2023
Russell Hobbs

Russell Hobbs Desire 20340-56 Handleiding

16 November 2022

Handleiding Snijmachine

Nieuwste handleidingen voor Snijmachine

Livoo

Livoo MEN435 Handleiding

20 November 2024
Cecotec

Cecotec Rock'nCut Advance Handleiding

20 November 2024
Prowork

Prowork PFSG 180/1 Handleiding

19 November 2024
RGV

RGV Luxury Italia 275 S Handleiding

18 November 2024
RGV

RGV Luxury Italia 20 GL-R Handleiding

18 November 2024
RGV

RGV Luxury Italia 25 GL Handleiding

18 November 2024
RGV

RGV Luxury Italia 300 ES Handleiding

18 November 2024
RGV

RGV Luxury Italia 22 GL-R Handleiding

18 November 2024
RGV

RGV Ausonia 190 Handleiding

18 November 2024
RGV

RGV LUCY 20 GL Handleiding

18 November 2024