Rolls RM89 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Rolls RM89 (2 pagina's) in de categorie Staafmixer. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
RM89
Professional 8 channel Mixer
SPECIFICATIONS
Input Impedance: Mic: 600 Ohms XLR balanced
Source:
22K Ohms RCA
Max Input Level: Mic: -14 dBV Mic level
+5 dBV XLR line
Source: 24 dBV
Total - In/Out Connectors: 7: XLR, 3: Stereo RCA, 1: 3.5mm
Phantom Power: +15 VDC
Output Level: +14 dBV max RCA
+20 dBV max XLR
Output Impedance: 100 Ohms Balanced XLR line level
600 Ohms Balanced XLR Mic level
1k Ohms RCA
Max Gain: Mic: 60 dB
Source: 26 dB
Tone Controls: +/-10 dB 500 Hz Bass
+/-10 dB 5 kHz Treble
Noise Floor: - 80 dB,
THD: <.025%,
S/N Ratio: 96 dB
Power Supply: 15 VDC
Size: 19” x 1.75” x 4” (48.3 x 4.5 x 10 cm)
Weight: 5 lbs. (2.3 kg)
Rolls Corporation
Salt Lake City, UT
11/23
www.rolls.com
QUICK START OPERATION GUIDE
INPUT
2
56
MIC
TONE
RM89
MIC/LINE
MIXER
0 10
MASTER
MONO
POWER
FRONT PANEL
NOTE: The following two descriptions are for Mic 1 to Mic 6.
LEVEL: Adjusts the amount of signal from the Microphone Input channel to the Master Level.
TONE: Adjusts the relative frequency components of the Mic signal. Turning this control clockwise from the center (detent) position de-
creases the low frequencies. Turning the control counter-clockwise from center decreases the high frequencies.
SOURCE LEVEL CONTROLS 1 - 2: Adjust the amount of signal from the indicated Source channel to the Master Level.
MONO: When IN makes both sources mono on the output section
IN 2: 1/8” (3.5 mm) Source Input jack. This jack parallels the Source 2 Input on the rear panel.
BASS: Varies the amount of the low frequency portion <(500 Hz) of the Source signals.
TREBLE: Varies the amount of the high frequency portion >(5 kHz) of the Source signals.
POWER: For engaging the power to the RM89 this is a hard wired switch when o󰀨 no power is consumed by the RM89.
LED: Indicates that the RM89 is powered on.
REAR PANEL
15 VDC INPUT: Connects to the included Rolls PS27s power adapter.
LINE OUTPUTS
RCA: Unbalanced output jacks
XLR: Mono balanced output jack
SOURCE INPUTS: Unbalanced RCA input jacks.
Mic/Line switches: For selecting Mic level or Line level for each individual input or output.
PHANTOM POWER: Dip switches for applying phantom power to the indicated microphone.
MICROPHONE INPUTS 1-6: Balanced XLR jacks for connecting to dynamic or condenser microphones.
The rear indentation is for securing the power cord to the unit.
3456
OFF=UP
ON=DOWN
PHANTOM POWER
123456
MAIN OUTPUTS
MONO STEREO
+
ROLLS
15 VDC
-
MODEL RM89
MADE IN USA
MADE IN USA
www.rolls.com
RM89
MIC/LINE
MIXER
0 10
MASTER
INPUT
2
MONO
56
MIC
TONE
POWER
INPUT LEVEL: MIC LINE
LEVEL
MIC
LINE


Product specificaties

Merk: Rolls
Categorie: Staafmixer
Model: RM89

Heb je hulp nodig?

Als je hulp nodig hebt met Rolls RM89 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Staafmixer Rolls

Handleiding Staafmixer

Nieuwste handleidingen voor Staafmixer