QUIO QU-ER-80-4 Handleiding


Lees hieronder de πŸ“– handleiding in het Nederlandse voor QUIO QU-ER-80-4 (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
_______________________________________________________________________________
https://quio rfid.de/-
1. Double click onβ€œ β€οΌŒenter QR code Reader parameter setting page,
2.Use mini USB data cable connect the QR code reader to PC, fill in light on, buzzer rings, QR -
code reader start done, then use the internet cable connect the QR code Reader to PC.
3.QR code Reader default fixed IP is 192.168.1.99, client PC manual setting the same network
segment with the QR code Reader, follow the operation as below Picture, can get the QR code
reader parameter via the software
_______________________________________________________________________________
https://quio rfid.de/-
4.Function parameter specification:
1.network parameter
Mainly include network parameter of the QR code Reader, configure relevant parameter,
click setting can done setting.
Internet mode: default fixed IP:192.168.1.99 mode, can select auto obtain mode
【HTTP address HTTP output mode need use domain name address】
【HTTP sever port HTTPoutput mode need use sever port】 οΌ›
【Docking services Voice HTTP output mode sever docking interface language PHP】 , 、
JSP、C#、ASP optionοΌ‰
_______________________________________________________________________________
https://quio rfid.de/-
2.format parameter setting
【output format selection】USB Virtual keyboard、USB virtual serial port、HTTP、MQTT、
RS232、WG26、WG34、RS485、access control system output( not enabled)、TCP、UDP functions
【card number output format】6H、8H、6H10D、8H10D、2H3D+4H5D option,this card
number format setting is invalid for QR Code
【HID format parameter】 data output if send carriage return If send line feed this 、 ,
parameter setting is invalid for USB virtual serials port, carriage return only valid for USB virtual
keyboard, linefeed only valid for RS232
【 】parameter can adjust correspond parameter as you need, this parameter setting is invalid
for USB virtual serial port, only valid for RS485, RS232
【 】 、QR code serial port output format DEC HEX DEC Reverse Hex Reverse、 、 、ASCII
option this parameter only valid for RS485,RS232β€œRS485,( 、RS232β€οΌŒHex、Hex Reverse output
format is Hex card number, total bit is odd, output is ASCII Even number, output is HEX card ,
numberοΌ‰
3.external parameter
【rest setting 0 for not reset 12hour interval 24 hours interval】 , s 、 οΌ›
【working mode common mode, single mode, interval mode】 ,
Common mode:can reading QR code constantlyοΌ›
single mode:the same QR code can not reading constantlyοΌ›
interval mode:reading the same QR code need waiting 15 seconds


Product specificaties

Merk: QUIO
Categorie: Niet gecategoriseerd
Model: QU-ER-80-4

Heb je hulp nodig?

Als je hulp nodig hebt met QUIO QU-ER-80-4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd QUIO

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd