Projecta IC2500 Handleiding

Projecta Batterij-oplader IC2500

Lees hieronder de 📖 handleiding in het Nederlandse voor Projecta IC2500 (24 pagina's) in de categorie Batterij-oplader. Deze handleiding was nuttig voor 64 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/24
INTELLI-CHARGE
7 STAGE SWITCHMODE
BATTERY CHARGER
P/No.s IC2500, IC2500W, IC3500, IC5000, IC800-24
2
IMPORTANT SAFETY INFORMATION
Please read this manual thoroughly before use and store in a safe place for future reference.
WARNING
• Explosive gases may escape from the battery during charging. Prevent flames and
sparks. Provide adequate ventilation.
• Before charging, read the instructions.
• For indoor use. Do not expose to rain.
• For charging lead acid batteries ONLY (for the size and voltage specified in the
specifications table).
• Disconnect the 240V mains supply before making or breaking the connections
to the battery.
• The battery charger must be plugged into an earthed socket-outlet.
• Connection to supply mains is to be in accordance with National wiring rules.
• Do not attempt to charge non-rechargeable batteries.
• Never charge a frozen battery.
• If the AC cord is damaged do not attempt to use. It must be replaced or repaired by
a qualified person.
• Corrosive substances may escape from the battery during charging and damage delicate
surfaces. Store and charge in a suitable area.
• Ensure all vehicle accessories including lights, heaters, appliances etc are turned off
prior to charging.
• This charger is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
• Young children should be supervised to ensure that they do not play with the appliance.
3
7-STAGE AUTOMATIC CHARGING
This is a fully automatic battery charger with 7 charge stages.
Automatic charging protects your battery from being overcharged so you can leave the
charger connected to the battery indefinitely.
7-stage charging is a very comprehensive and accurate charging technique that gives
your battery longer life and better performance compared to using traditional chargers.
Projecta’s Intelli-Charge chargers can be adjusted to suit a number of different battery
types including GEL, AGM, WET and Calcium. The chargers can also help restore drained
and sulphated batteries.
The 7 charge stages are:
Desulphation; Soft Start; Bulk; Absorption; Analysis; Recondition and Float.
1. DESULPH NATIO
Rejuvenates sulphated
batteries with a high
frequenc pulse.y
2. SOFT START
Increases battery life
by gently starting to
charge the battery.
3. BULK CHARGE
Reduces charging
time by delivering
maximum charge to
set voltage.
4. ABSORPTION
Ensures a full
charge to the
battery thoutwi
overcharging.
EQUALISATION
(Calcium mode only)
Returns a full
hydrometer reading
to calcium batteries
by removing acid
stratification.
5. ANALYSIS
Tests the battery to
ensure fully charged.
6. RECONDITION
Restores battery
health to deeply
discharged batteries
by equalising
the cells.
7. FLOAT
Float charge
maintains the
battery at 100%
charge.
VOLTAGE
CURRENT
(AMPS)
DESULPHATION
The Desulphation stage is designed to break down sulphation occurring in batteries
that have been left flat for extended periods of time, returning them back to full charge.
Sulphation occurs when lead-sulphate hardens and clogs up the battery cells.
SOFT START
This is a preliminary charge process that gently introduces power to the battery,
protecting the battery and increasing battery life.
BULK (CONSTANT CURRENT)
The Bulk stage reduces charging time by charging the battery at the maximum
rate (constant current) to a set voltage, at which point the battery is approximately
80% charged.

Product specificaties

Merk: Projecta
Categorie: Batterij-oplader
Model: IC2500

Heb je hulp nodig?

Als je hulp nodig hebt met Projecta IC2500 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Batterij-oplader Projecta

Projecta

Projecta HDBC35 Handleiding

9 Mei 2023
Projecta

Projecta IC5000 Handleiding

8 Mei 2023
Projecta

Projecta HDBC20 Handleiding

7 Mei 2023
Projecta

Projecta IC2500 Handleiding

24 April 2023
Projecta

Projecta IC1500L Handleiding

18 April 2023
Projecta

Projecta IC1500 Handleiding

8 April 2023
Projecta

Projecta BM320 Handleiding

7 April 2023
Projecta

Projecta AC250B Handleiding

2 April 2023
Projecta

Projecta BLT100 Handleiding

28 Maart 2023
Projecta

Projecta IDC45 Handleiding

26 Maart 2023

Handleiding Batterij-oplader

Nieuwste handleidingen voor Batterij-oplader

V-Tac

V-Tac S6-EH3P15K-H Handleiding

5 November 2024
V-Tac

V-Tac S6-EH3P15K02-NV-YD-L Handleiding

5 November 2024
V-Tac

V-Tac S6-EH3P20K-H Handleiding

5 November 2024
V-Tac

V-Tac VT-48200B Handleiding

5 November 2024
V-Tac

V-Tac S6-EH3P10K2-H Handleiding

5 November 2024
V-Tac

V-Tac S6-EH3P12K-H Handleiding

5 November 2024
MSW

MSW -CBC-105W-6A Handleiding

5 November 2024
Envertec

Envertec EVT800SE Handleiding

2 November 2024
Envertec

Envertec EVT600 Handleiding

2 November 2024
Ryobi

Ryobi PCG719 Handleiding

2 November 2024