Projecta HDBM4000 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Projecta HDBM4000 (28 pagina's) in de categorie Batterij-oplader. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
6/12/24V 40A 8 STAGE AUTOMATIC
CHARGER & BATTERY MANAGER
WORKSHOP
P/No. HDBM4000
2
IMPORTANT SAFETY INFORMATION
Please read this manual thoroughly before use and store in a safe place for future
reference.
WARNINGS
• Explosive gases. Prevent flames and sparks. Provide adequate ventilation during
charging.
• Before charging, read the instructions.
• For indoor use. Do not expose to rain.
• For charging lead acid batteries ONLY (of the size & voltage specified in the
specifications table).
• Always charge the battery on the correct voltage setting. Never set the charger to a
higher voltage than the battery.
• Disconnect the 240V mains supply before making or breaking the connections to
the battery.
• The battery charger must be plugged into an earthed socket-outlet.
• Connection to supply mains is to be in accordance with National wiring rules.
• Do not attempt to charge non-rechargeable batteries.
• Never charge a frozen battery.
• If the AC cord is damaged do not attempt to use. It must be replaced or repaired by
a qualified person.
• Corrosive substances may escape from the battery during charging and damage
delicate surfaces. Store and charge in a suitable area.
• Ensure all vehicle accessories including lights, heaters, appliances etc are turned off
prior to charging.
• This charger is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
• Young children should be supervised to ensure that they do not play with the
appliance
• Only use the hanger bolts provided with the docking station to mount on the back of
the charger
3
INDEX
1. Features Page 4
1.1 Specifications Page 6
1.2 Product Overview Page 7
1.3 Assembly/Set Up Page 9
2. Operation Page 10
2.1 Setting Battery Voltage Page 11
2.2 Pulse –Tronic Charge Page12
2.2.1 Charge Function Modes Page 12
2.2.2.1 Storing Pulse-Tronic Charge Page 14
2.2.2.2 Storing Supply/Diagnostic Mode Page 14
2.3 Battery and Alternator Test Page 15
2.3.1 Battery Test Page 15
2.3.2 Charge System Test (Alternator) Page 16
2.3.3 Battery Starting Charge Capacity (CCA) Page17
2.4 Battery Maintenance Page 18
2.4.1 Desulfation Page 19
2.4.2 Equalisation Page 19
2.5 Power Supply Page 21
2.5.1 Diagnostic Page 22
2.5.2 Supply Page 23
2.6 Engine Start Page 25
2.6.1 Procedure Page 25
2.7 Alarms Page 26
3. FAQ’s Page 27


Product specificaties

Merk: Projecta
Categorie: Batterij-oplader
Model: HDBM4000

Heb je hulp nodig?

Als je hulp nodig hebt met Projecta HDBM4000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Batterij-oplader Projecta

Handleiding Batterij-oplader

Nieuwste handleidingen voor Batterij-oplader