Pro-Cut KMS-13 Handleiding

Pro-Cut Snijmachine KMS-13

Lees hieronder de 📖 handleiding in het Nederlandse voor Pro-Cut KMS-13 (13 pagina's) in de categorie Snijmachine. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/13
DELI MEAT SLICER
OWNER´S MANUAL
OPERATION INSTRUCTIONS MODELS
KMS-13
READ THIS MANUAL BEFORE USING THE EQUIPMENT FOR THE FIRST TIME. 507132-0
KMS-13
INSTRUCTIONS FOR OPERATION, SERVICE AND MAINTENANCE OF THIS EQUIPMENT
1
CONTENTS: PAGE
I. INTRODUCTION 2
II. UNPACKING 3
III. INSTALLATION 4
IV. 5OPERATION
V. 6KEY ELEMENTS IN CUTTING QUALITY PRODUCT
VI. 6CLEANING
VII. MAINTENANCE 7
VIII. EQUIPMENT SPECIFICATIONS 9
IX. 9ELECTRICAL DIAGRAM
X. -PARTS LIST KMS 13 10
XI. -FIGURA #6 KMS 13 ANODIZED 11
DELI MEAT SLICER
2
DELI MEAT SLICER
I.INTRODUCTION:
CONGRATULATIONS! YOU HAVE ACQUIRED A PRO-CUT SLICER WHICH IS MADE OF HIGH QUALITY LONG LASTING
MATERIALS THAT SHOULD GIVE YOU YEARS OF TROUBLE FREE OPERATION A- ND SERVICE. THIS SLICER IS MADE OF
ANODIZED ALUMINIUM PARTS, THAT MAXIMIZES THE AND IT IS ALSO THE BEST FOR THE CONTACT APPEARENCE
WITH FOOD PRODUCTS.
BEFORE YOU UNPACK YOUR NEW PRO-CUT SLICER, IT IS OF VITAL IMPORTANCE THAT YOU AND ANY PERSON THAT
WILL OPERATE THIS UNIT READ THOROUGHLY THIS MANUAL.
WARNING!:
THIS MACHINE IS DESIGNED TO CUT FOOD PRODUCTS AND IS BY NATURE
DANGEROUS IF IT IS NOT USED AND MAINTAINED PROPERLY AND CAUTIOUSLY
FOR SAFETY.
DO NOT ALLOW UNTRAINED OR UNQUALIFIED PERSONNEL OR CHILDREN TO OPERATE THIS
EQUIPMENT.
NEVER SERVICE,PERFORM CLEANING MAINTENANCE THIS UNIT CONNECTEDOR ON WHILE IT IS TO
A POWER .SOURCE
NEVER USE HANDS OR FINGERS TO FEED PRODUCTS TO CUT; DO NOT PLACE FINGERS OR HANDS
WITHIN 4" (FOUR INCHES), OF THE BLADE, WHILE IN OPERATION.
THE MOST DANGEROUS COMPONENT OF THIS EQUIPMENT IS THE BLADE; ALWAYS EXERCISE
EXTREME CAUTION WHILE CLEANING OR SERVICING AND USE CUT RESISTANT STEEL OR PLASTIC
GLOVES FOR CLEANING OR SERVICING.
DO NOT LEAVE THE MACHINE UNATTENDED WHILE IN OPERATION.
KMS-13

Product specificaties

Merk: Pro-Cut
Categorie: Snijmachine
Model: KMS-13

Heb je hulp nodig?

Als je hulp nodig hebt met Pro-Cut KMS-13 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Snijmachine Pro-Cut

Pro-Cut

Pro-Cut KMS-13 Handleiding

27 Juni 2023
Pro-Cut

Pro-Cut KDS-10 Handleiding

25 Juni 2023

Handleiding Snijmachine

Nieuwste handleidingen voor Snijmachine

Livoo

Livoo MEN429 Handleiding

20 December 2024
Royal Catering

Royal Catering RCTC-5 Handleiding

17 December 2024
Royal Catering

Royal Catering RCGT-2 Handleiding

17 December 2024
Royal Catering

Royal Catering RCGS 155M Handleiding

17 December 2024
Gude

Gude GHF 800 Handleiding

8 December 2024
Toolland

Toolland PH360 Handleiding

7 December 2024
Boss

Boss Slicer SL-2 Handleiding

30 November 2024
Philco

Philco PHFS 6100 Handleiding

30 November 2024
Livoo

Livoo MEN435 Handleiding

20 November 2024
Cecotec

Cecotec Rock'nCut Advance Handleiding

20 November 2024