Prem-i-air EH1440 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Prem-i-air EH1440 (12 pagina's) in de categorie Heater. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
EH1440
2.5 kW Oil-Free Radiator
Radiateur Mica 2,5 kW
• Mica column heater
• 2 Heat settings
• Electronic thermostat
with remote control
• Built-in carrying handle
• Durable Castors
• Safety overload cut-out
• Cable storage feature
• 2 Réglages de Chaleur
• Thermostat Electronique
avec Télécommande
• Poignée Intégré
• Roulettes Robustes
• Coupure de Sécurité
en cas de Surcharge
• Compartiment de Rangement
du Câble d'Alimentation
Page 1
IMPORTANT
Installer and Users please note:
These instructions should be read carefully and left with the user of
the product for future reference.
BEFORE USE
You must inspect the appliance including its cable and plug for any
signs of damage. If the product is damaged, DO NOT use it, and
contact your supplier immediately.
INSTALLATION
Attaching the feet and castors.
Turn the appliance upside down and hold it steady.
Slide the foot into the base of the appliance adjacent to the mains
cable entry. A click will be heard when it is correctly aligned.
Slide the castor and axle assembly into the base of the appliance
at the opposite end. Again, a click will be heard when it is correctly
aligned.
Return the appliance to the upright position.
OPERATION
Plug the mains lead into a 13 Amp mains socket.
If connecting via an extension lead, make sure that the lead is
rated at 13 Amps or more, and that it is fully unwound.
Switch the appliance on at the mains socket.
Turn on the rocker switch at the side of the appliance adjacent to
the mains cable entry.
The display will light briefly.
Press the button to switch the appliance ON.
Page 2
The digital display will display the room
temperature.
The up- and down-arrow buttons can be
used to select full power or half power.
This is indicated by the segments to the
right of the flame symbol. Small segment
lit = half power. Both segments lit = full
power.
To set the thermostat press the TEMP
button, then press the up- or down-arrow
buttons to change the target
temperature. The thermometer symbol
will illuminate, and the digital display will
flash, showing the target temperature. After 5 seconds the display
will stop flashing and return to displaying the room temperature.
To set the timer press the TIMER button. The clock symbol will
illuminate. Then use the up- and down-arrow buttons to set the
number of hours for which the heater is to run before automatically
switching off.
Unplug the appliance from the mains when not in use. The cable
can be wrapped around the plastic cable tidy on the front panel.
USING THE REMOTE CONTROL
The remote control duplicates all the controls that are on the
control panel.
Page 3


Product specificaties

Merk: Prem-i-air
Categorie: Heater
Model: EH1440

Heb je hulp nodig?

Als je hulp nodig hebt met Prem-i-air EH1440 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Heater Prem-i-air

Handleiding Heater

Nieuwste handleidingen voor Heater