Prem-i-air EH1264 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Prem-i-air EH1264 (8 pagina's) in de categorie Heater. Deze handleiding was nuttig voor 68 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
EH1264
1kW Convector Heater
2 Heat settings
Adjustable thermostat
Free-standing or wall mounting
Convenient built-in carrying handle
Safety overload cut-out
2 year guarantee
Page 1
IMPORTANT
Installer and Users please note:
These instructions should be read carefully and left with the
user of the product for future reference.
INSTALLATION
For free-standing use: attach the feet to the underneath of
the heater using the four 12mm (½") screws.
To wall-mount: Firstly, remove the lower bracket from the
back of the heater, turn it upside down and replace it, so that
the tag protrudes below the heater.
Referring to the diagram opposite, draw two horizontal lines
on the wall 431mm (17") apart, the lower line more than
50mm (2") from the floor.
On the upper line, drill holes 110mm (4½") from the centre
line, using a 6mm (¼") masonry bit, and insert a wall plug.
Insert a screw into the hole and almost fully tighten.
On the lower line, drill a hole on the centre line using a 6mm
(¼") masonry bit, and insert a wall-plug.
Hang the heater on the two top brackets using the keyhole
slots on the back.
The lower bracket should now line up with the lower hole.
Insert a screw into the hole through the bracket, and fully
tighten.
Page 2
DRILLING DIMENSIONS FOR WALL MOUNTIN
Page 3


Product specificaties

Merk: Prem-i-air
Categorie: Heater
Model: EH1264

Heb je hulp nodig?

Als je hulp nodig hebt met Prem-i-air EH1264 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Heater Prem-i-air

Handleiding Heater

Nieuwste handleidingen voor Heater