Pioneer DJM-1000 Handleiding

Pioneer Mengpaneel DJM-1000

Lees hieronder de 📖 handleiding in het Nederlandse voor Pioneer DJM-1000 (98 pagina's) in de categorie Mengpaneel. Deze handleiding was nuttig voor 84 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/98

DJ MIXER

TABLE DE MIXAGE

DJ-MISCHPULT

MIXER PER DJ

DJ MENGPANEEL

MESA DE MEZCLAS DJ

DJM-1000

Operating Instructions

Mode d’emploi

Bedienungsanleitung

Istruzioni per l’uso

Gebruiksaanwijzing

Manual de instrucciones

Do not connect either wire to the earth terminal of a

three pin plug.

NOTE

After replacing or changing a fuse, the fuse cover in

the plug must be replaced with a fuse cover which

corresponds to the colour of the insert in the base

of the plug or the word that is embossed on the

base of the plug, and the appliance must not be

used without a fuse cover. If lost replacement fuse

covers can be obtained from your dealer.

Only 3 A fuses approved by B.S.I or A.S.T.A to

B.S.1362 should be used.

D3-4-2-1-2-2_En

The wires in this mains lead are coloured in

accordance with the following code:

Blue : Neutral

Brown : Live

If the plug provided is unsuitable for your socket

outlets, the plug must be cut off and a suitable plug

fitted.

IMPORTANT

FOR USE IN THE UNITED

KINGDOM

The cut-off plug should be disposed of and must

not be inserted into any 13 amp socket as this can

result in electric shock. The plug or adaptor or the

distribution panel should be provided with 3 A fuse.

As the colours of the wires in the mains lead of this

appliance may not correspond with coloured

markings identifying the terminals in your plug,

proceed as follows ;

The wire which is coloured blue must be connected

to the terminal which is marked with the letter N or

coloured black.

The wire which is coloured brown must be

connected to the terminal which is marked with the

letter L or coloured red.

Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified

service personnel.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

"dangerous voltage" within the product's

enclosure that may be of sufficient

magnitude to constitute a risk of electric

shock to persons.

CAUTION:

TO PREVENT THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR

BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT

D3-4-2-1-1_En-A

POWER-CORD CAUTION

Handle the power cord by the plug. Do not pull out the

plug by tugging the cord and never touch the power

cord when your hands are wet as this could cause a

short circuit or electric shock. Do not place the unit, a

piece of furniture, etc., on the power cord, or pinch the

cord. Never make a knot in the cord or tie it with other

cords. The power cords should be routed such that they

are not likely to be stepped on. A damaged power cord

can cause a fire or give you an electrical shock. Check

the power cord once in a while. When you find it

damaged, ask your nearest PIONEER authorized

service center or your dealer for a replacement.

S002_En

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading

the instructions, put them away in a safe place for future reference.

In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory

drawings. However the method of connecting and operating the unit is the same. K015 En

If the AC plug of this unit does not match the AC

outlet you want to use, the plug must be removed

and appropriate one fitted. Replacement and

mounting of an AC plug on the power supply cord of

this unit should be performed only by qualified

service personnel. If connected to an AC outlet, the

cut-off plug can cause severe electrical shock. Make

sure it is properly disposed of after removal.

The equipment should be disconnected by removing

the mains plug from the wall socket when left

unused for a long period of time (for example, when

on vacation).

D3-4-2-2-1a_A_En

CAUTION

The POWER switch on this unit will not completely

shut off all power from the AC outlet. Since the

power cord serves as the main disconnect device for

the unit, you will need to unplug it from the AC outlet

to shut down all power. Therefore, make sure the

unit has been installed so that the power cord can

be easily unplugged from the AC outlet in case of an

accident. To avoid fire hazard, the power cord should

also be unplugged from the AC outlet when left

unused for a long period of time (for example, when

on vacation). D3-4-2-2-2a_A_En

This product complies with the Low Voltage Directive

(73/23/EEC, amended by 93/68/EEC), EMC Directives

(89/336/EEC, amended by 92/31/EEC and

93/68/EEC).

D3-4-2-1-9a_En

WARNING

This equipment is not waterproof. To prevent a fire

or shock hazard, do not place any container filed

with liquid near this equipment (such as a vase or

flower pot) or expose it to dripping, splashing, rain

or moisture.

D3-4-2-1-3_A_En

WARNING

The voltage of the available power supply differs

according to country or region. Be sure that the

power supply voltage of the area where this unit

will be used meets the required voltage (e.g., 230V

or 120V) written on the rear panel. D3-4-2-1-4_A_En

Before plugging in for the first time, read the following

section carefully.

WARNING

To prevent a fire hazard, do not place any naked

flame sources (such as a lighted candle) on the

equipment. D3-4-2-1-7a_A_En

VENTILATION CAUTION

When installing this unit, make sure to leave space

around the unit for ventilation to improve heat

radiation (at least 5 cm at rear, and 3 cm at each

side).

WARNING

Slots and openings in the cabinet are provided for

ventilation to ensure reliable operation of the

product, and to protect it from overheating. To

prevent fire hazard, the openings should never be

blocked or covered with items (such as newspapers,

table-cloths, curtains) or by operating the

equipment on thick carpet or a bed.

D3-4-2-1-7b_A_En

Operating Environment

Operating environment temperature and humidity:

+5 ºC – +35 ºC (+41 ºF – +95 ºF); less than 85 %RH

(cooling vents not blocked)

Do not install this unit in a poorly ventilated area, or in

locations exposed to high humidity or direct sunlight (or

strong artificial light)

D3-4-2-1-7c_A_En

English

FEATURES CONTENTS

1High sound quality design

Analog signals are transmitted via the shortest path and converted

to digital signals by a 96 kHz sampling, 24 bit, high-quality A/D

converter, thus passing the signals to the digital mixing stage

under optimum conditions.

Through the use of a 32 bit DSP, mixing is achieved with zero

sound quality degradation, and together with simultaneous ideal

filtering, optimum sound is produced for professional DJs

working in clubs.

To get the most from these features, a great deal of care has been

paid to perfecting the sound quality, including a high-rigidity

chassis to cut down unnecessary vibrations that might affect the

sound, together with a high-performance power section using an

R-core transformer that supports bass quality, thus creating clear

and powerful sound ideal for club performances.

23 band isolator

Built-in 3-band isolator capable of producing level control +6 dB

to –∞ on each bandwidth.

The sharp operation feel allows the realization of a wide variety of

DJ performances.

32-system, 3-type SEND/RETURN

A 2-system, 3-type SEND/RETURN (PRE INSERT/POST INSERT/

AUX) is provided to allow multiple connection variations with

other external devices, such as effectors and samplers, thus

widening the range of DJ play potential.

4Fader curve adjust

The fader curve adjust allows adjustment not only the cross fader

curve (as on former models), but also of channel fader curve.

Both faders’ functions can be adjusted within 17 steps, so that DJs

can customize the settings to their own preferred settings.

5Digital IN/OUT

Using digital input connectors provided for each of the sampling

rates (44.1/48/96 kHz), a system can be built in which no sound

quality degradation occurs when connecting to external digital

devices.

A DIGITAL OUT connector with 24 bit/96 kHz sampling rate is

provided, facilitating recording at studios and other situations

demanding high sound quality.

Supports only linear PCM.

6MIDI OUT

MIDI signals can be output to allow MIDI control of external

devices.

7Digital link function

Multiple functions can be performed by using digital link cables to

connect other PIONEER DJ CD players, DJ effectors and AV

mixers.

8Other features

÷By using a control cable to connect the unit to a PIONEER DJ-

use CD player, playback can be started on the CD player in

automatic linkage to operation of the fader (“fader start play”).

÷Built-in “3-band equalizer” enabling level control within range

+6 dB to –26 dB at each bandwidth.

÷Features “2-band booth EQ” for control of booth monitor

response, thus facilitating booth monitoring by the DJ.

÷Built-in “cross fader assign” function, enabling more flexible

assigning of each channel’s input to the cross fader.

÷Built-in “TALK OVER function” automatically lowers track

volume during MIC-input.

FEATURES ................................................................... 3

CONFIRM ACCESSORIES ........................................... 3

CAUTIONS REGARDING HANDLING ........................ 4

BEFORE USING

CONNECTIONS............................................................ 5

CONNECTION PANEL ........................................... 5

POWER CORD CONNECTION ............................... 6

CONNECTING TO THE INPUT CONNECTORS ... 6

CONNECTING TO THE EFFECTOR AND

OUTPUT CONNECTORS ....................................... 7

MIDI CONNECTORS .............................................. 7

CONNECTING MICROPHONES, HEADPHONES ... 8

DIGITAL LINK CONNECTIONS ............................. 8

PART NAMES AND FUNCTIONS ............................... 9

OPERATIONS

OPERATIONS ............................................................. 13

BASIC OPERATIONS ........................................... 13

FADER CURVE ADJUSTMENTS......................... 13

FADER START FUNCTION .................................. 14

USING EXTERNAL EFFECTORS ......................... 14

DIGITAL LINK FUNCTION ................................... 15

OTHER

TROUBLESHOOTING ................................................ 16

SPECIFICATIONS ....................................................... 17

BLOCK DIAGRAM .................................................... 100

CONFIRM ACCESSORIES

Operating Instructions........................................................... 1

Power cord ............................................................................. 1

Product specificaties

Merk:	Pioneer
Categorie:	Mengpaneel
Model:	DJM-1000
Gewicht:	12000 g
Crosstalk (1kHz):	88 dB
Sample rate:	96 kHz
Aantal kanalen:	6 kanalen
Afmetingen (B x D x H):	482 x 375 x 214 mm
Totale harmonische vervorming (THD):	0.005 procent
Stroomverbruik (typisch):	63 W
Phono ingang (RCA):	6
Master (L, R) out:	1
Line inputs (RCA):	6
Digitaal geluid verwerken:	24 Bit
Microfoon Signal-to-Noise Ratio (SNR):	84 dB
Master (XLR) uit:	1
Line Signal-to-Noise Ratio (SNR):	104 dB
Booth out (1/4"):	1