PAC RPK4-GM2301 Handleiding

PAC Niet gecategoriseerd RPK4-GM2301

Lees hieronder de 📖 handleiding in het Nederlandse voor PAC RPK4-GM2301 (12 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/12
Complete Radio Replacement Kit with
Vehicle Information Retention for
Select 11-Bit GMLAN Vehicles
RPK4-GM2301
P ifi A C ti
Rev. 072517 Page 1
© 2017 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
Parts List
The RPK4-GM2301 includes everything you need for a professional installation of an aftermarket radio in your 11-Bit GM
Vehicle.
This kit contains:
1. Dash kit
1a. (x1) Double DIN mounting panel
1b. (x1) Single DIN radio ISO mount trim ring
1c. (x1) LCD adapter bracket (for single DIN applications)
1d. (x1) Pocket (for single DIN applications)
1e. (x8) Radio mounting screws
1f. (x1) USB cover (for when USBDMA1 or USBDMA6 is not used with our kit)
1g. (x2) Radio mounting brackets (one left and one right)
2. Radio replacement interface module
3. Radio connection harnesses
4. PAC-LCD
Overview
The RPK4-GM2301 is a complete radio replacement kit with vehicle information retention for select 11-Bit GMLAN Vehicles. This kit utilizes a
user friendly LCD display with onboard buttons to view and adjust vehicle information and settings. The included radio replacement interface
will retain factory steering wheel controls (SWC) and allows you to program two radio functions to each SWC button by using short press long
press dual command functionality. The interface also provides data bus driven outputs such as retained accessory power (RAP), illumination,
vehicle speed sensor (VSS), reverse trigger and parking brake.
Table of Contents: Page:
1. Factory Radio Removal --------------------------------------------------------- 2
2. Radio Replacement Installation and Wiring Instructions --------------- 3
3. Steering Wheel Control Programming --------------------------------- 3-4
4. Dash Kit Assembly --------------------------------------------------------------- 5
5. Using the PAC-LCD -------------------------------------------------------------- 6
1. If a double DIN radio is being installed with this kit, enough wire has been supplied to mount the LCD in the glove box or center console area.
2. The interface comes pre-programmed for all of the vehicle’s factory SWC functions and does not require programming, unless you wish to
re-assign the SWC functions, or utilize short press long press dual command functionality. The SWC can always be restored to default settings
by pressing and releasing the program button on the side of the interface once and waiting 7 seconds for the LED to ash 3 times.
3. The LED will ash whenever a SWC button is pressed.
4. The Interface has the ability to retain the warning chimes and audible turn signal clicks through its onboard piezo. This feature is on by default.
This can be disabled using the supplied PAC-LCD. For more info on disabling the chimes through the module see page 6.
Important Notes
1a.
3.
1d.
1c.
2.
1b.
4.
1e.
1f.
1g.
Complete Radio Replacement Kit with
Vehicle Information Retention for
Select 11-Bit GMLAN Vehicles
RPK4-GM2301
P ifi A C ti
Rev. 072517 Page 2
© 2017 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
Removing the factory radio from the vehicle
2004 - 2007 Chevrolet Malibu / Malibu Max / 2008 Chevrolet Malibu Classic
1. Carefully unclip the thin side trims from both the left and right side of the radio trim bezel.
2. Remove the (2) 9/32 screws from below the driver side under-dash panel.
3. Unclip and remove the side edge panel from the left side of the dash.
4. Remove the (2) 9/32 screws securing the left side of the driver side under-dash panel.
5. Unclip the wire harness from the side trim of the driver’s side under-dash panel.
6. Using a panel removal tool, carefully pry downward on the panel at the bottom of the driver’s side under-dash panel. (There are (3) panel
clips).
7. Using a panel removal tool, unclip the top edge of the driver’s side lower dash panel and lower out of the way.
8. Lower the glove box door all the way down.
9. Remove the single 9/32 screw from the middle of the glove box door latch bar.
10. Remove the (4) 9/32 screws securing the glove box dash section to the sub-dash.
11. Carefully remove the side panel from the right side of the dash.
12. Repeat steps 4 and 5 above for the right side of the dash.
13. Unclip and lower the panel below the glove box and remove the single 9/32 screw from the lower left side of the glove box panel.
Remove the glove box and panel.
14. Starting from the bottom of the radio/HVAC control trim bezel, pull bezel outward to unfasten.
15. Disconnect the hazard harness from the radio/climate control bezel and remove bezel.
16. Loosen the (2) 9/32 screws securing the HVAC controls.
17. Remove the (4) 9/32 screws securing the radio to the sub-dash.
18. Carefully pull radio upward and outward, disconnect the wire harness and antenna lead to remove radio.
2005 - 2006 Chevrolet Cobalt
1. Carefully pop the trim above the glove box with a panel removal tool. Remove trim at the top left of dash bezel.
2. Remove the dash panel with a panel removal tool. Note: Dash panel clips are very tight.
3. Disconnect the wire harness behind dash panel.
4. Remove the (4) 9/32 screws securing the radio to the sub-dash.
5. Carefully pull the radio upward and outward, disconnect the wire harness and antenna lead to remove radio.
2005 - 2009 Pontiac G6
1. Remove side trim panels from both driver and passenger side dash with a panel removal tool.
2. Remove (2) 9/32 screws on both driver and passenger side dash.
3. Remove (3) 9/32 screws from under steering column panel. Remove and set aside.
4. Remove (9) 9/32 screws which hold the glove box assembly in place. Lower the glove box and set aside.
5. Gently remove dash assembly from around radio, unclipping 1 plug located between the vents. Remove (4) 9/32 bolts securing the radio in
place.
6. Remove (2) 9/32 bolts securing heater control assembly in place. Slide the HVAC control assembly forward and remove the factory radio.
Illustration / Schematic
RP4-GM23-HAR
To Aftermarket
Radio
SWC Connection
See above chart for
dierent radio type
connections
Acc On/
Programming
LED
Programming
Button
Complete Radio Replacement Kit with
Vehicle Information Retention for
Select 11-Bit GMLAN Vehicles
RPK4-GM2301
P ifi A C ti
Rev. 072517 Page 3
© 2017 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
Aftermarket Radio Connections
Blue / Yellow (SWC Output) Kenwood or Newer
JVC
3.5mm Jack (SWC) Output Alpine, JVC, Clarion,
Pioneer, Sony, Boyo,
Dual, Lightning
Audio, Visteon,
Jensen or Advent
Default Steering Wheel Control Programming
Alpine JVC Kenwood Clarion Pioneer Sony Fusion
V
olume + Volume + Volume + Volume + Volume + Volume + Volume + Volume +
V
olume - Volume - Volume - Volume - Volume - Volume - Volume - Volume -
Seek Up Track + Track + Track + Search + Track + Track + Track +
Seek Down Track - Track - Track - Search - Track - Track - Track -
Band Band / Program Band / Disc+ N / P Band Band Band N / P
1-6 Preset + Preset / Disc - Disc / FM + N / P Preset + Preset + Power
Source Source Source Source Source Source Source Source
Mute
Mute Mute Mute Mute Mute Mute Mute
Default SWC Button Assignments
1. The radio select rotary switch on the side of the interface must be adjusted to the proper radio setting before plugging the
interface into the vehicle.
2. Make all connections as described in the chart below.
3. Connect the SWC wire or jack according to the chart below (aftermarket radio MUST support a wired remote input).
4. If you wish to reassign functions to the steering wheel controls, follow the optional programming instructions on the next page.
Conî‚¿guration and Wiring of Interface
1
2
3
4
5
6
7
8
9
0
Alpine JVC Kenwood Clarion Pioneer/Other Sony Fusion
1 2 3 4 7 8 9
Other = Advent, BOYO, Dual, Lightning Audio, Rockford Fosgate, Visteon
SET RADIO SELECT SWITCH
Optional Steering Wheel Control Programming
If you wish to re-assign the SWC functions or utilize short press long press dual command functionality, the interface must be
programmed in the speciî‚¿c order shown on the chart on the next page. If you come across a function in the chart that your steering
wheel does not have, or you do not want to program, press and release the programming button on the side of the interface to skip
that function. The LED will ash off and on conrming that you have successfully skipped that function and are ready to proceed
to the next one.
Short Press Long Press Dual Command Functionality
This feature allows you to assign two aftermarket radio functions to each of the vehicle’s SWC buttons. It can be used with as
many of the buttons as the user likes or none at all. When this functionality is implemented, quickly pressing and releasing a SWC
button will initiate the short press command, while pressing and holding a SWC button for longer than two seconds will initiate the
long press command. Please note that no long press commands are programmed by default. If you wish to assign dual command
functionality to the SWC please follow the programming steps on the next page.
IMPORTANT! The interface comes pre-programmed for the functions listed in the chart below and does not require programming unless you
wish to re-assign the SWC functions to different buttons. The SWC can always be restored to default settings by pressing the program button
on the side of the interface once and waiting for the timeout. PLEASE NOTE: Due to the many different possible OEM SWC conî‚¿gurations,
some applications may need to be reprogrammed for the SWC assignments to match the button on the wheel.
Interface Connector
Vehicle Connector SWC Connector
Vehicle Connector
Yellow Battery +12v
Black Ground
White Front Left + input
White / Black Front Left - input
Grey Front Right + input
Grey / Black Front Right - input
Green Rear Left + input
Green / Black Rear Left - input
Vehicle Connector
Purple Rear Right + input
Purple / Black Rear Right - input
Blue* Amp / Antenna Turn On
Red Accessory +12v Output
Orange / White Illumination Output (+)
Pink** Vehicle Speed Output
Purple / White** Reverse Output (+)
Light Green** Parking Brake Output (-)
* Blue wire must be connected even if the vehicle is not
equipped with an ampliî‚¿er. Connect to the aftermarket
radios Blue / White remote turn on wire.
** These connections are not necessary when installing
a single DIN head unit.

Product specificaties

Merk: PAC
Categorie: Niet gecategoriseerd
Model: RPK4-GM2301

Heb je hulp nodig?

Als je hulp nodig hebt met PAC RPK4-GM2301 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd PAC

PAC

PAC RP4-GM31 Handleiding

31 Augustus 2024
PAC

PAC NU-GM51 Handleiding

28 Augustus 2024
PAC

PAC NAV-1129 Handleiding

28 Augustus 2024
PAC

PAC LP7-2R Handleiding

28 Augustus 2024
PAC

PAC LP7-4 Handleiding

28 Augustus 2024
PAC

PAC GMK367B Handleiding

28 Augustus 2024
PAC

PAC CP1-FRD1 Handleiding

28 Augustus 2024
PAC

PAC C2A-CHY5 Handleiding

28 Augustus 2024
PAC

PAC NU-GM3 Handleiding

28 Augustus 2024
PAC

PAC CP1-TSL1 Handleiding

28 Augustus 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Livarno Lux

Livarno Lux IAN 071407 Handleiding

29 November 2024
Livarno Lux

Livarno Lux IAN 317128 Handleiding

29 November 2024
Livarno Lux

Livarno Lux IAN 049213 Handleiding

29 November 2024
Livarno Lux

Livarno Lux ST-1002 Handleiding

29 November 2024
Livarno Lux

Livarno Lux HG02489 Handleiding

29 November 2024
Livarno Lux

Livarno Lux HG02189 Handleiding

29 November 2024
Livarno Lux

Livarno Lux IAN 365198 Handleiding

29 November 2024
Livarno Lux

Livarno Lux IAN 367074 Handleiding

29 November 2024
Livarno Lux

Livarno Lux HG00701 Handleiding

29 November 2024
Livarno Lux

Livarno Lux IAN 337273 Handleiding

29 November 2024