Ozito ODTH-100 Handleiding
Ozito
Laserwaterpas
ODTH-100
Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito ODTH-100 (6 pagina's) in de categorie Laserwaterpas. Deze handleiding was nuttig voor 57 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/6
DIGITAL HUMIDITY &TEMPERATURE METER
HOLD SETDP
MIN
MAX
H
%
DIGITAL HUMIDITY &
TEMPERATURE METER
HOLD SET
DP
MIN
MAX
H
%
DIGITAL HUMIDITY
& TEMPERATURE
METER
0-100%RH | -20 TO 60°C
INSTRUCTION MANUAL
SPECIFICATIONS
Power: 3 x 1.5V AAA Batteries
Measurable Range: -20 to 60°C (Temperature)
0-100%RH (Humidity)
-62 to 60°C (Dew Point)
Operating Temperature: -20 to 60°C
Resolution: 0.1°C / 0.1%RH
Weight: 0.109kg
ODTH-100
STANDARD EQUIPMENT
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the
original date of purchase. If a product is defective it will be replaced
in accordance with the terms of this warranty. Warranty excludes
consumable parts, for example: valve adapters and accessories.
WARNING! The following actions will result in the warranty
being void.
• If the tool has been operated on a supply voltage other than that
specified on the tool.
• If the tool shows signs of damage or defects caused by or
resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction
manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE
RELATING TO THE WARRANTY POLICY OR
PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
ozito.com.au
Digital Humidity &
Temperature Meter
3 x AAA Batteries & Storage
Bag
1019
GENERAL POWER TOOL SAFETY WARNINGS
BATTERY & THERMO-HYGROMETER WARNINGS
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
may result in electric shock, re and/or serious injury.
Save all warnings and instructions for future reference. The
term “power tool” in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
b. Do not operate power tools in explosive atmospheres, such as
in the presence of ammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c. Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in
any way. Do not use any adapter plugs with earthed (grounded)
power tools. Unmodied plugs and matching outlets will reduce risk of
electric shock.
b. Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators. There is an increased risk
of electric shock if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions. Water entering
a power tool will increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase the risk
of electric shock.
e. When operating a power tool outdoors, use an extension cord
suitable for outdoor use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the inuence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in serious personal
injury.
b. Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate conditions will reduce
personal injuries.
c. Prevent unintentional starting. Ensure the switch is in the o-
position before connecting to power source and/or battery pack,
picking up or carrying the tool. Carrying power tools with your nger
on the switch or energising power tools that have the switch on invites
accidents.
d. Remove any adjusting key or wrench before turning the power tool
on. A wrench or a key left attached to a rotating part of the power tool
may result in personal injury.
e. Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations.
f. Dress properly. Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving parts.
g. If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used.
Use of dust collection can reduce dust-related hazards.
h. Do not let familiarity gained from frequent use of tools allow you
to become complacent and ignore tool safety principles. A careless
action can cause severe injury within a fraction of a second.
4. Power tool use and care
a. Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at
the rate for which it was designed.
b. Do not use the power tool if the switch does not turn it on and o.
Any power tool that cannot be controlled with the switch is dangerous
and must be repaired.
c. Disconnect the plug from the power source and/or the battery pack
from the power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to
operate the power tool. Power tools are dangerous in the hands of
untrained users.
e. Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may aect the
power tool’s operation. If damaged, have the power tool repaired before
use. Many accidents are caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc. in accordance
with these instructions, taking into account the working conditions
and the work to be performed. Use of the power tool for operations
dierent from those intended could result in a hazardous situation.
h. Keep handles and grasping surfaces dry, clean and free from oil
and grease. Slippery handles and grasping surfaces do not allow for
safe handling and control of the tool in unexpected situations.
5. Service
a. Have your power tool serviced by a qualied repair person using
only identical replacement parts. This will ensure that the safety of
the power tool is maintained.
WARNING! The appliance is not to be used by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction.
Young children should be supervised to ensure that they do not play
with the appliance.
1. Do not store or use the tool and battery pack in locations where the
temperature may reach or exceed 40
0C (such as inside sheds or metal
buildings in summer).
2. Do not incinerate the battery pack even if it is seriously damaged or is
completely worn out. The battery can explode in a re.
3. Do not use the meter in applications where failure of the meter could
result in personal injury or large economic loss.
The benefits provided under this warranty are in addition to other
rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You
are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount
to a major failure.
Generally you will be responsible for all costs associated with a claim
under this warranty, however, where you have suffered any additional
direct loss as a result of a defective product you may be able to claim
such expenses by contacting our customer service helpline above.
ONLINE MANUAL
Scan this QR Code with
your mobile device to take
you to the online manual.
DIGITAL HUMIDITY &
TEMPERATURE METER
SET HI LO
ALM
DP
H
%
MAX MIN
DIGITAL HUMIDITY &
TEMPERATURE METER
OLD SET
DP
MIN
MAX
H
%
Installing Batteries
The thermo-hygrometer requires 3 x 1.5V AAA batteries to operate.
1. Press in the tab and lift o the
battery compartment lid.
2. Insert the batteries into the
compartment.
Note: Refer to the batteries
symbols in the compartment and
check that the batteries have been
inserted in the correct orientation.
3. Replace the battery compartment lid.
Low Battery Indicator
When the low battery icon
appears, the batteries are at low
charge and need to be replaced.
1. Auto Shut O Icon
2. Settings & Limit Alarm Icons
3. Max/Min Mode Icon
4. Temperature Units
5. Temperature Value
6. Dew Point Units
7. Dew Point Mode Icon
8. Relative Humidity Unit
9. Humidity/Dew Point Value
10. Datahold Icon
11. Low Battery Icon
12. Measurement Probe
13. Digital Display
14. Power Button
15. ‘DP | SET’ Button
16. ‘MAX | MIN’ Button
17. ‘Backlight | HOLD’ button
DIGITAL HUMIDITY & TEMPERATURE METER
KNOW YOUR PRODUCT
1. BATTERIES
SETUP & PREPARATION
DIGITAL HUMIDITY &
TEMPERATURE METER
H
%
1.5V AAA
1 2 3
89
4
5
6
7
12
13
15
16
14
11
17
10
Switching The Meter On & O
1. Press the power button to
switch the meter on. The built-
in buzzer will emit a beep.
2. Press the power button again
to switch the unit o.
Note: The unit will automatically switch
o after 10 minutes of inactivity if the
auto shut o function is toggled on.
Refer to the Settings Adjustments
instructions to toggle this function on/o.
Toggling Between Humidity & Dew Point Measurements
The unit will automatically enter
measuring mode when switched
on. Direct the probe at the area
you want to measure to obtain
temperature measurements.
Press the ‘DP | SET’ button to
toggle between dew point and
relative humidity readings while
in measurement mode.
Datahold
The datahold function locks the
measurent mode and displays the last
reading taken onscreen.
Press the ‘Backlight | HOLD’ button to
toggle the datahold mode on/o. The
datahold symbol will appear on screen
when this setting is on.
Backlight
Press and hold the ‘Backlight |
HOLD’ button for 1 second to
toggle the screen backlight on/
o.
Note: This function cannot be
toggled while in the settings
menu.
Displaying Maximum/Minimum Readings
This function shows the maximum or minimum temperature and
humidity/dew point readings taken since the meter was switched on.
1. Press the ‘DP | SET’ button to select the desired measurement
(dew point or relative humidity).
2. Press the ‘MAX | MIN’ button once to
see the maximum reading recorded.
The ‘MAX’ symbol appears onscreen.
3. Press ‘MAX | MIN’ button again to
see the minimum reading. The ‘MIN’
symbold appears onscreen.
Note: No new measurements are taken
while in max/min mode.
4. Press the ‘MAX | MIN’ button once
more to return to measuring mode.
The ‘MIN’ symbol will disappear.
Erasing Recorded Maximum/Minimum Readings
1. Whilst in MAX. mode, pressing the
‘DP | SET’ button will erase the
recorded maximum from memory. The
display will show a series of dashes
for the readings.
2. Enter MIN. mode by pressing the ‘MAX | MIN’ button and press
the ‘DP | SET’ button’ again to erase the recorded minimum from
memory.
3. Press the ‘MAX | MIN’ button to return
to measuring mode. The unit will start
recording maximum and minimum
temperatures again.
2. CONTROLS 3. MAX./MIN. READINGS
OPERATION
DIGITAL HUMIDITY &
TEMP ERATURE METER
HOLD SET
DP
MIN
MAX
DIGITAL HUMIDITY &
TEMPERATURE METER
HOLD SET
DP
MIN
MAX
H
DP
DIGITAL HUMIDITY &
TEMPERATURE METER
HOLD SET
DP
MIN
MAX
H
%
DIGIT AL HUMIDI T Y &
TEMPERATURE MET ER
HOLD S ET
DP
MAX
H
%
DIGITAL HUMIDITY &
TEMPERATURE METER
H
%
DIGITAL HUMIDITY &
T EMPERATURE METER
HOLD SE T
DP
MIN
MAX
DP
MAX
DIGITAL HUMIDITY &
TEMPERATURE METER
DP
MIN
DIGITAL HUM IDITY &
TE MPERATURE MET ER
HOLD SET
DP
MIN
MAX
%
DIGITAL HUM IDITY &
TE MPERATURE MET ER
HOLD SET
DP
MIN
MAX
%
DIGIT AL HUMIDIT Y &
TEMP ERAT UR E MET ER
HOLD SET
DP
MAX
DP
MAX
DIGITAL HUMIDITY &
TEMPERATURE METER
HOLD SET
DP
MAX
H
%
Product specificaties
| Merk: | Ozito |
| Categorie: | Laserwaterpas |
| Model: | ODTH-100 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito ODTH-100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Laserwaterpas Ozito
11 November 2023
10 November 2023
11 Juni 2023
11 Mei 2023
10 Mei 2023
5 Mei 2023
24 April 2023
18 April 2023
2 April 2023
31 Maart 2023
Handleiding Laserwaterpas
- Laserwaterpas Bosch
- Laserwaterpas DeWalt
- Laserwaterpas Brandson
- Laserwaterpas Bruder Mannesmann
- Laserwaterpas Einhell
- Laserwaterpas Fluke
- Laserwaterpas Laserliner
- Laserwaterpas Leica
- Laserwaterpas Makita
- Laserwaterpas Milwaukee
- Laserwaterpas Silverline
- Laserwaterpas Skil
- Laserwaterpas Toolcraft
- Laserwaterpas Hilti
- Laserwaterpas Futech
- Laserwaterpas Craftsman
- Laserwaterpas Stabila
- Laserwaterpas Alpha Tools
- Laserwaterpas Neo
- Laserwaterpas PLS
Nieuwste handleidingen voor Laserwaterpas
4 December 2024
4 December 2024
6 November 2024
6 November 2024
2 November 2024
2 November 2024
2 November 2024
15 Juli 2024
12 Juni 2024
4 Mei 2024