Ozito LMR-025 Handleiding
Ozito
Laserwaterpas
LMR-025
Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito LMR-025 (6 pagina's) in de categorie Laserwaterpas. Deze handleiding was nuttig voor 64 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/6
LASER
RANGE FINDER
25m Range
INSTRUCTION MANUAL
SPECIFICATIONS
Battery: 3V DC (2 x AAA Battery)
Laser Power: Class 2, <1mW
Working Range: 0.05-25m
Laser Diode: 635nm
Accuracy: ±3.0mm
Weight: 90g
LMR-025
WHAT’S IN THE BOX
Laser Range Finder
2 x AAA Batteries
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the
original date of purchase and is intended for DIY (Do It Yourself)
use only. If a product is defective it will be replaced in accordance
with the terms of this warranty. Lithium Ion batteries are covered
by a 12 month warranty. Warranty excludes consumable parts.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
0317
OFF
m
Min/Max
OFF
m
Min/Max
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
8 AAA Battery x 2
OFF
m
Min/Max
KNOW YOUR PRODUCT SETUP & PREPARATION
1. INSTALLING BATTERIES
1 Laser Window
2 Reference Point Icon
3 Battery Charge Indicator
4 Digital Display
5 Measurement Value
6 On/Off &
Measuring Button
7 Mode & Reference Button
LASER RANGE FINDER
ACCESSORIES
1
2
4
5
6
7
8
3
The Laser Range Finder unit requires 2 x AAA batteries to operate.
1 Remove the battery
compartment lid from the back
of the laser unit using the tab
at the bottom.
3 Place the top of the battery lid
into the recess in the laser unit
and push the lid tab down to
secure in place.
2 Insert 2 x AAA batteries in
the correct direction indicated
by the embossing inside the
battery compartment.
2. CONTROLS 3. DIGITAL DISPLAY
OPERATION
Reference Point Icon
Switching On and Off
Measuring Button
Changing Operating Modes
Operating Mode Icon
Battery Charge Indicator
Measurement Value
Changing the Reference Point
1 To turn the unit on, press the
on/off Button
Once the unit is turned on, the
on/off & measuring button can
be pressed once to display the
laser pointer to align, then should
be pressed again to take the
measurement.
1 Press the mode & reference
button to cycle through the
numerous operating modes
until the desired mode is
selected.
1 The icon to the right of the
reference icon will indicate the
current operating mode:
• Single distance
• Area
• Volume
• Continuous Minimum
• Continuous Maximum
1 The icon at the top right corner
indicates the charge level of
the batteries.
1 Once a measurement is taken,
the distance will show on the
digital display.
Note: The current and previous
measurements are both displayed
on screen.
1 Press and hold the mode &
reference button down until
the reference point changes.
The reference point is where the measurement is measured from. You
can measure from the top or bottom of the laser unit.
2 To turn the unit off, hold the
on/off button down until the
unit turns off.
OFF
OFF
Min/Max
OFF
Min/Max
m
OFF
Min/Max
HOLD
OFF
HOLD
1 When using the of the laser as the Bottom
reference point, the icon shown here will be
displayed in the top left corner.
Note: The height of the tool will be included
in the measurement.
2 When using the of the laser as the Top
reference point, the icon shown here will be
displayed in the top left corner.
Note: The height of the tool will not be
included in the measurement.
WARNING! ENSURE LASER WINDOW IS NOT AT
EYE LEVEL OR DIRECTED TOWARDS OTHERS
WHEN OPERATING.
These modes are explained in the ‘Operating Modes’ section.
Product specificaties
| Merk: | Ozito |
| Categorie: | Laserwaterpas |
| Model: | LMR-025 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito LMR-025 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Laserwaterpas Ozito
11 November 2023
10 November 2023
11 Juni 2023
11 Mei 2023
10 Mei 2023
5 Mei 2023
24 April 2023
18 April 2023
2 April 2023
31 Maart 2023
Handleiding Laserwaterpas
- Laserwaterpas Bosch
- Laserwaterpas DeWalt
- Laserwaterpas Brandson
- Laserwaterpas Bruder Mannesmann
- Laserwaterpas Einhell
- Laserwaterpas Fluke
- Laserwaterpas Laserliner
- Laserwaterpas Leica
- Laserwaterpas Makita
- Laserwaterpas Milwaukee
- Laserwaterpas Silverline
- Laserwaterpas Skil
- Laserwaterpas Toolcraft
- Laserwaterpas Hilti
- Laserwaterpas Futech
- Laserwaterpas Craftsman
- Laserwaterpas Stabila
- Laserwaterpas Alpha Tools
- Laserwaterpas Neo
- Laserwaterpas PLS
Nieuwste handleidingen voor Laserwaterpas
4 December 2024
4 December 2024
6 November 2024
6 November 2024
2 November 2024
2 November 2024
2 November 2024
15 Juli 2024
12 Juni 2024
4 Mei 2024