Ozito LLR-005 Handleiding
Ozito
Laserwaterpas
LLR-005
Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito LLR-005 (6 pagina's) in de categorie Laserwaterpas. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/6
LASER
LEVEL
5m Range
INSTRUCTION MANUAL
SPECIFICATIONS
Battery: 3V DC (2 x AAA Battery)
Laser Power: Class 2, <1mW
Working Range: 5m (Line Laser)
20m (Point Laser)
Laser Diode: 635nm (Line Laser)
650nm (Point Laser)
Accuracy: ±0.5mm/m
Weight: 80g
LLR-005
STANDARD EQUIPMENT
Laser Level
Wall Mount Bracket
2 x AAA Batteries
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the
original date of purchase and is intended for DIY (Do It Yourself)
use only. If a product is defective it will be replaced in accordance
with the terms of this warranty. Lithium Ion batteries are covered
by a 12 month warranty. Warranty excludes consumable parts.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
0520
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
8 AAA Battery x 2 9 Wall Mount Bracket
KNOW YOUR PRODUCT SETUP & PREPARATION
1. INSTALLING BATTERIES
1 Point Laser
2 Battery Compartment
3 Rear Magnets
4 Vertical Spirit Level
5 SlidingOn/OSwitch
6 Horizontal Spirit Level
7 Line Laser
LASER LEVEL
ACCESSORIES
1
4
5
6
7
8 9
2
3
The Laser Measurer unit requires 2 x AAA batteries to operate.
1 Remove the battery
compartment lid from the back
of the laser unit using the tab.
3 Place the side of the battery lid
into the recess in the laser unit
and push the lid tab down to
secure in place.
2 Insert 2 x AAA batteries in
the correct direction indicated
by the embossing inside the
battery compartment.
WARNING! BEFORE INSTALLING BATTERIES, ENSURE
THE UNIT IS SWITCHED OFF TO PREVENT THE LASER
FROM OPERATING.
2. WALL MOUNT BRACKET 3. CONTROLS
OPERATION
Switching On and O
Spirit Levels
Magnetic Mounting
A wall mount bracket is included with your laser level to allow you to
attach to a wall using a screw or nail, or to a tripod with a 1/4” thread.
1 Attach the mounting bracket
to a wall using a screw or nail,
or attach to a tripod with a 1/4”
thread.
1 To turn the Line Laser on,
pushtheon/oswitchtothe
left.
The laser unit has 2 operation modes; a Line Laser or a Point Laser.
The laser level has 2
perpendicular spirit levels to allow
you to check if the unit is perfectly
horizontal or vertical.
The laser unit has magnets at the
rear to allow mounting to metal
surfaces.
2 To turn the Point Laser on,
pushtheon/oswitchtothe
right.
3 Toturnthelaserunito,push
theon/oswitchintothe
middle.
3 Use the dial on the bracket to
adjust the height.
2 Place the back of the laser
level onto the metal plate of
the bracket with the magnets
on the rear of the unit.
LINE
LASER
POINT
LASER
OFF
WARNING! ENSURE LASER WINDOW IS NOT AT
EYE LEVEL OR DIRECTED TOWARDS OTHERS
WHEN OPERATING.
Product specificaties
| Merk: | Ozito |
| Categorie: | Laserwaterpas |
| Model: | LLR-005 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito LLR-005 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Laserwaterpas Ozito
11 November 2023
10 November 2023
11 Juni 2023
11 Mei 2023
10 Mei 2023
5 Mei 2023
24 April 2023
18 April 2023
2 April 2023
31 Maart 2023
Handleiding Laserwaterpas
- Laserwaterpas Bosch
- Laserwaterpas DeWalt
- Laserwaterpas Brandson
- Laserwaterpas Bruder Mannesmann
- Laserwaterpas Einhell
- Laserwaterpas Fluke
- Laserwaterpas Laserliner
- Laserwaterpas Leica
- Laserwaterpas Makita
- Laserwaterpas Milwaukee
- Laserwaterpas Silverline
- Laserwaterpas Skil
- Laserwaterpas Toolcraft
- Laserwaterpas Hilti
- Laserwaterpas Futech
- Laserwaterpas Craftsman
- Laserwaterpas Stabila
- Laserwaterpas Alpha Tools
- Laserwaterpas Neo
- Laserwaterpas PLS
Nieuwste handleidingen voor Laserwaterpas
4 December 2024
4 December 2024
6 November 2024
6 November 2024
2 November 2024
2 November 2024
2 November 2024
15 Juli 2024
12 Juni 2024
4 Mei 2024