Ozito LCT-1805 Handleiding
Ozito
Laserwaterpas
LCT-1805
Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito LCT-1805 (8 pagina's) in de categorie Laserwaterpas. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/8
CROSS LINE
LASER LEVEL
8m Working Range
INSTRUCTION MANUAL
SPECIFICATIONS
Battery: 3V DC (2 x AA Battery)
Laser Power: Class 2, <1mW
Working Range: 8m
Laser Diode: 635nm
Accuracy: ±0.5mm/m
Self-Levelling Range: ±40
Weight: 0.2kg
LCT-1805
WHAT’S IN THE BOX
Cross Line Laser Level
Tripod
Mounting Clamp
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the
original date of purchase and is intended for DIY (Do It Yourself)
use only. If a product is defective it will be replaced in accordance
with the terms of this warranty. Lithium Ion batteries are covered
by a 12 month warranty. Warranty excludes consumable parts.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
0217
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT SETUP & PREPARATION
1. INSTALLING BATTERIES
1 On/Off &
Operating Mode Button
2 Auto Levelling Indicator Light
3 Laser Window
4 Automatic Levelling Switch
5 Battery Compartment
CROSS LINE LASER LEVEL WITH TRIPOD
1
2
3
4
5
612
13
14
8
7
9
10
11
The Cross Line Laser Level unit requires 2 x AA batteries to operate.
1 Remove the battery
compartment lid from the laser
unit using the tab at the top.
3 Place the bottom of the battery
lid into the recess in the laser
unit and push the lid tab down
to secure in place.
2 Insert 2 x AA batteries in the
correct direction indicated
by the embossing inside the
battery compartment.
a
b
WARNING! BEFORE INSTALLING BATTERIES, ENSURE
THE UNIT IS SWITCHED OFF, INCLUDING AUTOMATIC
LEVELLING SWITCH, TO PREVENT THE LASER FROM
OPERATING.
6 1/4” Tripod Mounting Plate
7 Spirit Level
8 Angle Adjusting Handle
9 Height Locking Knob
10 Tripod Legs
11 Leg Locking Levers
12 Tilt Locking Knob
13 Rotation Locking Knob
14 Height Adjustment Handle
2. USING THE TRIPOD 3. ADJUSTING THE TRIPOD
Adjusting the Height of the LaserAttaching the Laser to the Tripod
Adjusting the Angle of the Laser
Adjusting the Tilt of the Laser
The tripod allows you to set up the laser in a specic position and easily
make adjustments to the height, angle and tilt of the unit.
1 Open up the 3 legs of the
tripod to stabilise the platform.
2 Align the 1/4” mount
at the base of the
laser unit with the 1/4”
screw at the top of the
tripod.
3 Rotate the laser unit clockwise
to fasten the unit to the
mounting plate securely.
Note: Make sure the laser is
pointing perpendicular to
the angle adjusting handle.
a
b
a
b
a
b
4 To remove the laser unit
from the mounting plate,
rotate the unit anti-
clockwise.
1 Extend the 3 legs of the tripod
by unlocking the leg locking
levers and raising the legs.
Note: Ensure the locking levers
are locked once desired
height is achieved to
secure the tripod.
2 To raise the laser further, wind
the height locking knob anti-
clockwise to loosen, then raise
the laser by winding the height
adjustment handle.
Note: Ensure the height locking
knob is secured after
adjusting, by rotating
clockwise.
1 Rotate the angle
adjusting handle anti-
clockwise to allow the
handle to move.
2 Adjust unit to the desired
angle using the handle, then
secure in place by rotating the
handle clockwise.
1 Loosen the tilt locking knob by
rotating anti-clockwise. Then
adjust the tilt angle and secure
in place again.
Rotating the Laser
1 Loosen the rotation locking
knob by rotating anti-
clockwise. Adjust unit by using
the angle adjusting handle.
Note: Secure in place after
adjusting, by turning the
rotation locking knob
clockwise.
Product specificaties
| Merk: | Ozito |
| Categorie: | Laserwaterpas |
| Model: | LCT-1805 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito LCT-1805 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Laserwaterpas Ozito
11 November 2023
10 November 2023
11 Juni 2023
11 Mei 2023
10 Mei 2023
5 Mei 2023
24 April 2023
18 April 2023
2 April 2023
31 Maart 2023
Handleiding Laserwaterpas
- Laserwaterpas Bosch
- Laserwaterpas DeWalt
- Laserwaterpas Brandson
- Laserwaterpas Bruder Mannesmann
- Laserwaterpas Einhell
- Laserwaterpas Fluke
- Laserwaterpas Laserliner
- Laserwaterpas Leica
- Laserwaterpas Makita
- Laserwaterpas Milwaukee
- Laserwaterpas Silverline
- Laserwaterpas Skil
- Laserwaterpas Toolcraft
- Laserwaterpas Hilti
- Laserwaterpas Futech
- Laserwaterpas Craftsman
- Laserwaterpas Stabila
- Laserwaterpas Alpha Tools
- Laserwaterpas Neo
- Laserwaterpas PLS
Nieuwste handleidingen voor Laserwaterpas
4 December 2024
4 December 2024
6 November 2024
6 November 2024
2 November 2024
2 November 2024
2 November 2024
15 Juli 2024
12 Juni 2024
4 Mei 2024