Ozito ACP-2115K Handleiding
Ozito
Compressor
ACP-2115K
Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito ACP-2115K (8 pagina's) in de categorie Compressor. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/8
0
25
50
75
100
125
150
0
(1)00
(3)00
(5)00
(7)00
(9)00
2
4 6
8
10
Lb/in²
(PSI)
kPA
(BAR)
PRE SS URE GAU GE
kg/cm²
AIR COMPRESSOR
1.5HP 21L
0
25
50
75
100
125
150
0
(1)00
(3)00
(5)00
(7)00
(9)00
2
4 6
8
10
Lb/in²
(PSI)
kPA
(BAR)
PRES S U RE GAU G E
kg/cm ²
AIR CO MPRE SSO R
1.5HP 21L
OIL FREE AIR
COMPRESSOR
21L 1.5HP
INSTRUCTION MANUAL
SPECIFICATIONS
Power Supply: 230–240V ~ 50Hz
Motor: 1100W (1.5HP) S3 50%
Tank Capacity: 21L
No Load Speed: 2,850/min
Max. Pressure: 8bar (116psi)
Max. Flow Rate: 140L/min
Free Air Delivery: 70L/min
IP Rating: IP20
Weight: 22.5kg
ACP-2115K
STANDARD EQUIPMENT
3 YEAR REPLACEMENT WARRANTY*
Your product is guaranteed for a period of 36 months from the original date of purchase. If
a product is defective it will be replaced in accordance with the terms of this warranty. Warranty
excludes consumable parts, for example: valve adapters and accessories.
*This product is intended for DIY use only and replacement warranty covers domestic use.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other than that specified on the tool.
• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents
or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
Ozito Industries Pty. Ltd. 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
ozito.com.au
21L Air Compressor
2 x Wheels, 2 x Large Bolts, 4 x
Large Washers, 2 x Large Spring
Washers & 2 x Large Nuts
Air Filter, Support Foot, Small Bolt, 2
x Washers, Spring Washer & Nut
Blow Gun, Brush Nozzle, Tapered
Nozzle, Rubber Nozzle, 2 x Needle
Nozzles, Needle Adaptor & Tyre
Pressure Gun
6 x Nitto Fittings, 2 x Adaptors,
Coiled Air Hose & Dust Mask
0621
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY
YOU MUST RETURN THE PRODUCT TO YOUR NEAREST
BUNNINGS WAREHOUSE WITH YOUR BUNNINGS
REGISTER RECEIPT. PRIOR TO RETURNING YOUR
PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR
CUSTOMER SERVICE HELPLINE:
Australia: 1800 069 486
New Zealand: 0508 069 486
The benefits provided under this warranty are in addition to other rights and remedies which
are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty,
however, where you have suffered any additional direct loss as a result of a defective product
you may be able to claim such expenses by contacting our customer service helpline above.
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE
THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE
WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS
YOU MAY HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
0
25
50
75
100
125
150
0
(1)00
(3)00
(5)00
(7)00
(9)00
2
4 6
8
10
Lb/in²
(PSI)
kPA
(BAR)
PRES SU RE GA UGE
kg/cm²
AIR COMPRESSOR
1.5HP 21L
1. Air Filter
2. Motor
3. On/Off Switch
4. Pressure Regulator
5. Carry Handle
6. Regulated Pressure Outlet
7. Pressure Gauge
8. Support Foot
9. Drain Valve
10. Pressure Tank
11. Wheel
12. Tank Handle
AIR COMPRESSOR
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
1 2 3 4 5
67891112 10
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
Pre-Setup Checks
• Examine the machine for signs of transit damage. If damaged,
do not use, return to place of purchase
• The compressor should be set up near to the user.
• Avoid long air lines and long supply lines (extensions).
• Make sure the intake air is dry and dust-free.
• Do not set up the compressor in damp or wet rooms. The
compressor is designed to be used in dry rooms. It is prohibited
to use the compressor in areas where work is conducted with
sprayed water.
• Before you use the machine, make sure that the mains voltage
complies with the specifications on the rating plate.
• The compressor may only be used in suitable areas (with good
ventilation and an ambient temperature from 5°C to 40°C).
There must be no dust, acids, vapours, explosive or flammable
gases in the room.
WARNING! ENSURE THE TOOL IS TURNED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
Attaching The Support Foot
1. Place the supporting foot
and then a small washer
onto the small bolt. Thread
this through the hole in the
foot bracket.
2. Thread the other small
washer and then the spring
washer onto the bolt. Secure
the assembly with the small
nut.
Attaching The Wheels
1. Place the large bolt through
the wheel and a large
washer. Then slide this
through the hole in the
wheel bracket. Place a large
washer then a spring washer
onto the bolt and secure this
with a large nut.
2. Repeat step 1 to fit the
second wheel on the opposite side of the tank.
Fitting The Air Filter
1. Remove the transportation
cover from the air
filter connection with a
screwdriver.
2. Attach the supplied air filter
by screwing it in clockwise.
Connecting The Air Hose to the Compressor
1. Pull back the sleeve on the
regulated pressure outlet of
the compressor and insert
the male Nitto end of the air
hose..
2. Release the sleeve; the Nitto
coupling should click into
place.
3. Check that the fitting is secure by tugging gently on the
connector. If the hose detaches, repeat steps 2 & 3, pushing the
Nitto connector firmly into the outlet.
Disconnecting Air Tools
WARNING! ENSURE YOU HAVE A FIRM GRIP ON THE
AIR HOSE WHEN DISCONNECTING IT FROM THE AIR
COMPRESSOR, AS PRESSURISED AIR IN THE TANK
MAY CAUSE IT TO WHIP AROUND AND INFLICT INJURY
OR DAMAGE.
1. To remove an air tool from
the unit, retract the sleeve
on the female Nitto fitting
and disconnect the air hose
from the air compressor.
2. Repeat the same procedure with the air tool and air hose.
0
25
50
75
100
125
150
0
(1)00
(3)00
(5)00
(7)00
(9)00
2
4
6
8
10
Lb/in²
(PSI)
kPA
(BAR)
PRESSURE GAUGE
kg/cm ²
0
25
50
75
100
125
150
0
(1)00
(3)00
(5)00
(7)00
(9)00
2
46
8
10
Lb/in²
(PSI)
kPA
(BAR)
PRE S SU RE GA UG E
kg/cm²
Product specificaties
| Merk: | Ozito |
| Categorie: | Compressor |
| Model: | ACP-2115K |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito ACP-2115K stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Compressor Ozito
8 April 2024
16 Maart 2024
16 Maart 2024
29 Augustus 2023
28 Mei 2023
22 Mei 2023
20 Mei 2023
18 Mei 2023
16 Mei 2023
29 Maart 2023
Handleiding Compressor
- Compressor Bosch
- Compressor Xiaomi
- Compressor AEG
- Compressor DeWalt
- Compressor Airpress
- Compressor Bavaria
- Compressor Boss
- Compressor Danfoss
- Compressor Duro
- Compressor Duro Pro
- Compressor Einhell
- Compressor Emax
- Compressor Eufab
- Compressor Ferm
- Compressor Festool
- Compressor Global
- Compressor Gude
- Compressor Hikoki
- Compressor Hitachi
- Compressor Holzmann
- Compressor Hyundai
- Compressor Kibani
- Compressor Laica
- Compressor Livoo
- Compressor Makita
- Compressor Merlin
- Compressor Metabo
- Compressor Milwaukee
- Compressor Nilfisk
- Compressor Parkside
- Compressor Powerplus
- Compressor Robust
- Compressor Samson
- Compressor Scheppach
- Compressor Silvercrest
- Compressor Silverline
- Compressor Stanley
- Compressor Technaxx
- Compressor Toolcraft
- Compressor Topcraft
- Compressor Trotec
- Compressor Ultimate Speed
- Compressor Vonroc
- Compressor Westfalia
- Compressor WilTec
- Compressor Workzone
- Compressor Zipper
- Compressor OKAY
- Compressor Omnitronic
- Compressor Osram
- Compressor Black And Decker
- Compressor Steren
- Compressor Cocraft
- Compressor Draper
- Compressor Meec Tools
- Compressor Senco
- Compressor Hamron
- Compressor Aerotec
- Compressor Contimac
- Compressor HBM
- Compressor Power Craft
- Compressor Tacklife
- Compressor Truper
- Compressor Festo
- Compressor Fieldmann
- Compressor Biltema
- Compressor Porter-Cable
- Compressor Sun Joe
- Compressor Dedra
- Compressor CMI
- Compressor Herkules
- Compressor Bimar
- Compressor MSW
- Compressor Sthor
- Compressor Craftsman
- Compressor Alphacool
- Compressor Freeman
- Compressor Pretul
- Compressor Hazet
- Compressor Full Boar
- Compressor Yato
- Compressor Avantco
- Compressor Auto Joe
- Compressor Unimac
- Compressor PreSonus
- Compressor Carel
- Compressor Outbac
- Compressor Golden Age Project
- Compressor Eventide
- Compressor Abac
- Compressor DBX
- Compressor SPL
- Compressor Lindell Audio
- Compressor King Craft
- Compressor Arebos
- Compressor POWERNAIL
- Compressor Anova
- Compressor Pansam
- Compressor Challenge Xtreme
- Compressor Narvon
- Compressor Airman
- Compressor Pro-Lift
- Compressor Aomni
- Compressor Numax
- Compressor TOOLMATE
- Compressor California Air Tools
- Compressor Ilsco
- Compressor Hulk Power
- Compressor Cartrend
- Compressor Prowork
- Compressor Proviel
- Compressor Creemers
- Compressor ExelAir
- Compressor TJM
- Compressor API Audio
- Compressor TAURUS Titanium
Nieuwste handleidingen voor Compressor
4 December 2024
4 December 2024
4 December 2024
4 December 2024
4 December 2024
4 December 2024
4 December 2024
4 December 2024
1 December 2024
1 December 2024