Ocean WDXT Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Ocean WDXT (10 pagina's) in de categorie Wasmachine. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10
OPERATING
INSTRUCTI NSO
WASHER DRYER
newSWDX900
OPERATING INSTRUCTIONS WASHING MACHINE
INSTALLATION
HOW TO REMOVE THE TRANSPORT RODS
Stainless Steel Tub
1Each rod is fixed on the machine with 2
screws: unscrew and remove these with
the aid of a screw driver or a spanner
2Turn the rods approximately 45 degrees
outwards
3Withdraw them from the machine
4Refit the 4 screws into the holes
5Fit the plastic closures into the holes which
the rods have been removed from.
•We recommend you to keep the rods, as
they must be used if the machine has to
be transported (when moving etc), re-
membering to repeat the complete opera-
tion when re-installing the machine.
ATTENTION: Do not plug the appliance into the electrical supply before having removed the transit rods first. After having unpac-
ked the appliance, the first and indispensable operation to be done, is to remove the transport rods, as per the following instruction.
11
2
2
33
2 19
OPERATING INSTRUCTIONS WASHING MACHINE
OPERATING INSTRUCTIONS WASHING MACHINE
INSTALLATION
Levelling
1Check if every foot touches the floor
2Check if the units are tight, using a suitable
key
3In case the machine does not stand firm (is
not levelled):
4Unlock the nut of the foot which does not
touch the floor. Rotate the foot in clock-
wise direction, screwing it down unitl it
touches
5Verify If The Machine Stands Firm And
Tighten The Nut.
To keep vibration, noise and movement to a minimum, it is essential that the machine is absolutely level . Adjustments can be made as
follows:
FEET
1
2
Incorrect position: not levelled
Incorrect position: levelled and not tightened
Correct position: levelled and tightened
a= 18mm (Max)
3
4
a
5
IN CASE SOMETHING DOES NOT WORK BEFORE, YOU
C :ALL SERVICE
PROBLEM CAUSES SOLUTION
The machine does not drain or
spin
1. Drain filter is not clean 1. Clean filter ( see " Mainte-
nance")
2. Drain hose is kinked 1. Eliminate kink
3. Pipes of drain system are
obstructed
2. Call for qualified hydraulic
technician
4. Programme knob is on anti-
crease (stop with water)
3. See booklet: Push button
and function stop the ma-
chine
Water Leaks /lather leaks 1. Too much detergent 1. Reduce quantity of detergent
2. Detersivo non adatto. 2. Use suitable detergent for
machine wash
3. Il cassetto del detersivo o la
sua sede sono intasati.
3. Clean dispenser and seat
(see “Maintenance”)
4. La bocca del tubo di scarico
non è ben fissata allo
scarico fisso.
4. Fix well the outlet at the end
of the drain hose
Machine vibrates or is noisy 1. La lavatrice è rumorosa? (ha
ancora le staffe?).
1. Verify presence of transport
rods (see removal of Trans-
port Rods”
2. La lavatrice non è ben
livellata.
2. Adjust the feet of the ma-
chine (see “levelling”)
3. La lavatrice è appoggiata al
muro o ai mobili.
3. Replace the machine: it
must stand
4. freely on its feet
4. Carico di biancheria mal
distribuito o troppo leggero.
5. Remember to unfold large
items (sheets) when you
put them in the drum. Pos-
sibly avoid minimum loads
Door does not open 1. E' in azione il blocco di
sicurezza.
1. Wait for 2 minutes after hav-
ing depressed the On/Off
button (machine stops and
light is off, before opening
the door
18 3
OPERATING INSTRUCTIONS WASHING MACHINE


Product specificaties

Merk: Ocean
Categorie: Wasmachine
Model: WDXT

Heb je hulp nodig?

Als je hulp nodig hebt met Ocean WDXT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Wasmachine Ocean

Handleiding Wasmachine

Nieuwste handleidingen voor Wasmachine