Nitecore TM15 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Nitecore TM15 (2 pagina's) in de categorie Zaklamp. Deze handleiding was nuttig voor 52 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
User Manual
Features
· At 2650 lumens the TM15 is world’s smallest and brightest
rechargeable searchlight
· Utilizes 3 x CREE XM-L2 LEDs
· Thermal protection circuit prevents overheating
· Compatible with both 18650 Li-ion and CR123 batteries
· Intelligent charging circuit with status detection. Recharge easily, safely
and quickly
· Exceptionally long runtimes using 4 × 18650 Li-ion or 8 × CR123
batteries
· Capable of using 1 × 18650 or 2 x CR123 batteries in emergency
situations
· Innovative single button two-stage switch provides a user-friendly
interface (Patented)
· Integrated power indicator light displays remaining battery power
(Patented)
· Power indicator secondary function displays battery voltage (accurate
to 0.1V)
· Coated mineral glass resists scratches
· Aluminum reflector ensures a consistent and powerful beam
· Stainless steel retaining ring protects the core components from
damage
· Constructed from aircraft grade aluminum alloy
· HA III Military grade hard-anodized
· IPX-8 standard waterproof (two meters)
Dimensions
Length: 158mm (6.22”)
Head diameter: 60 mm (2.36”)
Tube diameter: 50mm (1.96”)
Weight: 447g (15.77oz) (without battery)
Accessories
Charger, quality holster, lanyard, spare O-ring
Battery Options
Operation instructions
Battery installation
Insert 4 × 18650 Li-ion or 8 × CR123 batteries with the positive (+) end
pointing toward the flashlight head. In special circumstances, such as
emergency situations, between one and three 18650 Li-ion or two and six
CR123 batteries may be used. After loading the batteries, the power
indicator light will blink to indicate the battery voltage. Please refer to the
“Power Tips” section of this manual for details.
Thanks for purchasing NITECORE!
Output & Runtime
NOTICE
Stated data has been measured according to the international flashlight testing
standards ANSI/NEMA FL1 using four quality NITECORE 18650 (3.7V 2600mAh)
battery or eight NITECORE CR123 (3V 1550mAh) batteries under laboratory
conditions. The data may vary due to individual usage habits and environmental
conditions.
TM 15
TURBO HIGH MID LOW
LUMENS
1400
LUMENS
2650
LUMENS
600
LUMENS
330
1
h
1
h min10
6
h min20
3
h min10
8
h min20
16
h min30
3
h
13
h
LOWER
LUMENS
110
52
h
36
h
465m (Beam Distance)
54100cd (Peak Beam Intensity)
IPX-8, 2m
(Waterproof AND Submersible)
1.5m (Impact Resistant)
8×CR123
4×18650
NITECORE (SYSMAX) is a member of PLATO, participating in and helping
to develop the ANSI FL1 standard of measurement. Product testing data
is in accordance with these internationally recognized scientific
standards.
Note: The potential risks of over-discharging batteries can include
leakage and explosion so caution must be exercised when using
less than 4 x 18650 or 8 x CR123. Ensure you know your batteries’
limits and use the TM15’s emergency functionality sparingly.
Furthermore, maximum output may be reduced when using less
than the maximum amount of batteries.
WARNING
1. Insert batteries with the positive (+) end pointing toward the flashlight
head.
2. Do not mix rechargeable and non-rechargeable batteries.
3. Do not mix batteries of different types/brands.
4. Do not mix batteries of different charge levels.
5. Do not use lithium batteries without a protected circuit board.
6. This product does not support 18650 rechargeable Li-ion batteries
without a protection circuit board as these batteries are too short for
the TM15’s battery compartment.
Charging the TM15
1. Connect the charging cable to the flashlight and the A/C power adapter
to the wall outlet as shown in the adjacent image. Fully charging four
depleted 18650 batteries takes approximately 7 hours.
2. Under normal charging conditions, the blue indicator light on the on/off
switch will blink twice every second.
3. If a problem is detected while charging the TM15 will stop charging and
the blue indicator will blink rapidly. This can be caused by faulty or
incorrectly inserted batteries.
4. When charging is complete, the blue indicator will remain on.
*Warning: Charge 18650 rechargeable Li-ion batteries only, do not attempt to
charge non-rechargeable batteries, CR123 or RCR123 batteries.
SIZE
Nominal voltage
Compatible
Primary Lithium battery * CR123 3V Yes (Compatible but can
NOT be recharged)
Yes (Compatible but can
NOT be recharged)
18650 Rechargeable Li-ion battery 18650 3.7V Yes (Recommended and
can be recharged)
Rechargeable Li-ion battery * RCR123 3.7V
®
The All-Round Flashlight Expert
SYSMAX Industry Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address Rm1407-08, Glorious Tower, 850 East Dongfeng
Road, Guangzhou, China 510600
Power Tips
1. When the light is on, the blue power indicator will blink once every two
seconds when power levels reach 50%.
2. When the light is on, the blue power indicator will flicker constantly
when power is very low.
3. Each time batteries are inserted, the light is put into lockout Mode or
half/fully press the switch under normal charging conditions, the power
indicator light will blink in various patterns to show the battery voltage
(accurate to ±0.1V). For example, when the battery voltage is at a
maximum charge of 4.2V, the power indicator will blink 4 times in quick
succession, followed by a one second pause and two more blinks,
indicating a total battery voltage of 4.2V.
Thermal protection
TM15 is very compact. Extended operation in Turbo mode will cause the
body temperature to continually rise, thus, making it too hot to use. So
NITECORE does not recommend using the TM15 in Turbo mode for
extended periods. TM15 built-in thermal protection circuit prevents
overheating. For your safety and to protect the flashlight from failure, the
TM15 will automatically reduce its output to prevent overheating once it
has reached 60 degrees.
Precaution: When the flashlight is hot, do not attempt to cool it by
submerging it in liquid.
Changing batteries
When the power indicator blinks consistently it means the batteries need
to be replaced or recharged. Alternatively if the light becomes dim or
unresponsive to adjustments once again, the batteries need to be
replaced or recharged.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a
thin coating of silicon-based lubricant.
Warranty Service
All NITECORE® products are warranted for quality. DOA / defective
products can be exchanged for replacement through a local
distributor/dealer within the 14 days of purchase. After 14 days, all
defective / malfunctioning NITECORE® products will be repaired free of
charge for a period of 18 months from the date of purchase. After 18
months, a limited warranty applies, covering the cost of labor and
maintenance, but not the cost of accessories or replacement parts.
The warranty is nullified in all of the following situations:
1. The product(s) is/are broken down, reconstructed and/or modified by
unauthorized parties.
2. The product(s) is/are damaged through improper use.
3. The product(s) is/are damaged by leakage of batteries.
For the latest information on NITECORE® products and services, please
contact your national NITECORE® distributor or send an email to
service@nitecore.com
Please follow our facebook for more info: NITECORE Flashlights
®
The All-Round Flashlight Expert
Caution:
1. Do not charge batteries of different types or different brands together.
2. Under normal charging conditions, fully or half press the switch the
power indicator light will blink to indicate the battery voltage. Please
refer to thePower Tipssection of this manual for details.
General Operation
NB: The TM15 utilizes a 2-stage switch similar to a camera shutter
button. The light’s numerous functions are selected according to the
depth the switch is pressed.
Switching ON/OFF
The TM15 has two modes: Daily mode and Turbo mode.
With the light turned off:
·Press the switch partway down and hold to enter Momentary Daily
mode. Release the switch to turn the light off again.
·Press the switch all the way down and hold to enter into Momentary
Turbo mode. Release the switch to turn the light off again.
·Press the switch partway down and release within one second to
access Constant Output Daily mode. Press switch to turn light off again.
·Press the switch all the way down and release within one second to
access Constant Turbo mode. Press switch to turn light off again.
Standby mode
With the light turned on:
Press the switch all the way down and release within one second to enter
into standby mode. In this mode, the light will consume small amounts of
power to maintain the settings in the MCU (micro control unit) but appear
to be turned off. When in standby mode the power indicator light will flash
once every three seconds to show the location of the light.
Brightness Selection
When turned on in Daily mode, press the switch partway down to select a
brightness level of ultra low, low, medium, high or turbo. Holding the
switch for more than one second to access turbo mode, and the selected
brightness level will be memorized when the light is turned off.
When turned on in Turbo mode, press the switch partway down to cycle
through the brightness level of turbo and high output level. There's no
memory function in Turbo mode.
Strobe Function
With the light turned on, press the switch all the way down twice in quick
succession to access strobe mode. Press once again to exit the strobe
mode.
Lockout and Unlock functions
With the light turned on: Press the switch all the way down and hold for
more than one second. The light will turn off and enter into lockout mode.
Lockout mode consumes almost no battery power and prevents the light
from accidentally turning on. Holding the switch for more than one second
to exit the lockout mode.
NB:
1. When entering lockout mode, the power indicator will flash to indicate
specific battery voltage. Please refer to thePower Tips” section of this
manual for details.
2. When TM15 is kept in a backpack or left unused for extended periods,
Nitecore recommends the bezel is loosened to cut off the power entirely,
thus saving battery power and preventing accidental activation of the
flashlight.
Thanks for purchasing NITECORE!


Product specificaties

Merk: Nitecore
Categorie: Zaklamp
Model: TM15

Heb je hulp nodig?

Als je hulp nodig hebt met Nitecore TM15 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Zaklamp Nitecore

Nitecore

Nitecore P23i Handleiding

17 November 2024
Nitecore

Nitecore GEM10UV Handleiding

17 November 2024
Nitecore

Nitecore HA40 Handleiding

17 November 2024
Nitecore

Nitecore GEM8 Handleiding

17 November 2024
Nitecore

Nitecore NU05 Handleiding

17 November 2024
Nitecore

Nitecore GEM8UV Handleiding

17 November 2024
Nitecore

Nitecore HC30 Handleiding

17 November 2024
Nitecore

Nitecore DL10 Handleiding

17 November 2024
Nitecore

Nitecore T2s Handleiding

17 November 2024
Nitecore

Nitecore P16TAC Handleiding

17 November 2024

Handleiding Zaklamp

Nieuwste handleidingen voor Zaklamp

EMOS

EMOS P4110 Handleiding

2 December 2024
EMOS

EMOS P4539 Handleiding

2 December 2024
EMOS

EMOS P4531 Handleiding

2 December 2024
Fenix

Fenix E12 V2.0 Handleiding

19 November 2024
Fenix

Fenix TK16 V2.0 Handleiding

19 November 2024
Fenix

Fenix E09R Handleiding

19 November 2024
Fenix

Fenix HM60R Handleiding

19 November 2024
Ledlenser

Ledlenser T² Handleiding

18 November 2024