Nitecore P10 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Nitecore P10 (1 pagina's) in de categorie Zaklamp. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/1
®
User Manual
Features
• Premium CREE XM-L2 (T6) LED
• Maximum output of 800 lumens
• Crystal Coating Technology combined with “Precision Digital Optics Technology” for
extreme reflector performance
• Boasts a peak beam intensity of 9,300cd and a throw distance of up to 193 meters
• Highly efficient circuit offers up to 26 hours of use on low
• Dual-switch tail cap designed for tactical use and easy application
• STROBE READYTM
button for quick access to Strobe Mode (Chinese Patent:
201320545349.4)
• Three selectable modes brings flexibility in operation
• Tail switch features integrated power indicator to display remaining battery power
(Chinese Patent: ZL201220057767.4)
• Anti-rolling design to provide a firm grip
• Titanium steel clip included
• Toughened ultra-clear mineral glass with anti-scratch coating
• Constructed from aero grade aluminum alloy with HAIII military grade hard-anodized
finish
• Waterproof in accordance with IPX-8 (two meters submersible)
• Impact resistant to 1.5 meters
Dimensions
Length: 134mm (5.28”)
Head Diameter: 25.4mm (1)
Tail Diameter: 25.4mm (1”)
Weight: 82grams (2.89oz)(without battery)
Thanks for purchasing NITECORE!
Brightness & Runtime
The All-Round Flashlight Expert
Accessories
Included: quality holster, CR123 battery
magazine, clip, tactical ring, lanyard, spare
O-ring
Optional: remote switch RSW2, tactical
lanyard NTL10/NTL20
Battery Options
Operation Instructions
Battery Installation
Install one 18650 Li-ion battery or two
CR123 Li-ion batteries with the positive pole
pointing forward (toward the bezel).
NOTE: Integrated LEDs within the tail switch
will blink to indicate remaining battery power
after battery installation. Please refer to
Power Tips for more information.
WARNING
1. Install the batteries as instructed.
Incorrect battery installation can cause
unsuccessful activation.
2. NBM1618 battery magazine holds 2 ×
CR123 Li-ion batteries, inhibits battery
movement inside the tube and helps
maintain electrical continuity.
3 This product CANNOT be powered by
flat-top batteries.
4. AVOID direct eye exposure.
Switching ON/OFF
To switch ON: Press the tail button until a “click” is heard.
To switch OFF: with the light on, press the tail button again until a “click” is heard.
Mode Selection
The P10 offers three different modes of illumination for different users and situations.
Tactical Mode: this mode only provides turbo output and is ideal for self-defense, ,
emergencies and tactical operations.
Law Enforcement Mode: this mode provides two brightness levels: medium and
turbo. This mode is designed for law enforcement officers and patrol guards.
General Mode (default mode for first time use): this mode provides three brightness
levels: low, medium and turbo. With the light on, press the
STROBE READYTM button on the
tail to cycle through all three brightness levels.
NOTE: When in medium and turbo mode, the P10 will reduce output luminance
automatically after 3 minutes of use to prevent battery overheating and extend battery
longevity.
To select a desired mode:
1. Ensure the P10 is switched off.
2. Loosen the bezel.
3. Press and hold the STROBE READYTM button on the tailcap while simultaneously
tightening the bezel.
4. Once the bezel has been tightened, the P10 will indicate a mode has been selected
by flashing once for Tactical Mode, twice for Law Enforcement Mode or three times for
General Mode.
5. To cycle through all three modes, simply repeat the above procedures.
Strobe Ready
1. With batteries loaded and the light off, press and hold STROBE READY
TM
button on the
tailcap to enter Strobe mode, release to exit.
2. With the light on in Tactical Mode, press
STROBE READYTM button on the tailcap to enter
Strobe mode. To exit, simply press
STROBE READY TM button again or switch the light off.
3. With the light on in Law Enforcement Mode or General Mode, press and hold
STROBE READYTM button on the tailcap for more than 0.5 second to enter strobe mode. To
exit, simply press
STROBE READYTM button again.
Note: This product has memory effect to ensure direct access to the last used
brightness levels or strobe when resumed.
Power Tips
Two integrated red LEDs built into the tail switch blink to indicate remaining battery
power when the tail cap is tightened after battery installation. The power indicators
will blink three times when power levels are above 50%; twice when power levels are
below 50%; and once when battery power is close to depletion.
NOTE: When batteries are already installed and a precise power reading is required,
ensure the P10 is powered down for 20 seconds before retightening the tail cap to
detect battery power status.
Changing Batteries
Batteries should be replaced when any of the following occurs: The power indicators
blink rapidly, output appears to be dim or the flashlight becomes unresponsive.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a thin coating
of silicon-based lubricant.
Warranty Service
All NITECORE® products are warranted for quality. Any defective / malfunctioning
NITECORE® product can be repaired free of charge for a period of 60 months (5
years) from the date of purchase. Beyond 60 months (5 years), a limited warranty
applies, covering the cost of labor and maintenance, but not the cost of accessories
or replacement parts.
The warranty is nullified in all of the following situations:
1. The product(s) is/are broken down, reconstructed and/or modified by unauthorized
parties.
2. The product(s) is/are damaged through improper use.
3. The product(s) is/are damaged by leakage of batteries.
For the latest information on NITECORE® products and services, please contact a
local NITECORE® distributor or send an email to service@nitecore.com
※All images, text and statements specified herein this user manual are for reference
purpose only. Should any discrepancy occurs between this manual and information
specified on www.nitecore.com, information on our official website shall prevail.
Sysmax Industry Co., Ltd. reserves the rights to interpret and amend the content of
this document at any time without prior notice.
NOTE
The above data has been
measured in accordance with the
international flashlight testing
standards ANSI/NEMAFL1 using 1
x 3.7V 2600mAh Nitecore 18650
battery and 2 x 3V 1550mAh
Nitecore CR123 batteries under
laboratory conditions. The data
may vary slightly during real-world
use due to battery type, individual
usage habits and environmental
factors.
TYPE
Nominal voltage
Compatible
Primary Lithium battery CR123 3V Y (Recommended)
18650 Rechargeable Li-ion battery 18650 3.7V Y (Recommended)
Rechargeable Li-ion battery RCR123 3.7V Y
P10
SYSMAX Industry Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address： Rm1401-03, Glorious Tower, 850 East Dongfeng Road,
Guangzhou, China 510600
HIGH MID LOW
LUMENS
290
LUMENS
800
LUMENS
40
4
h min30
26
h
9
h
LUMENS
400
LUMENS
800
LUMENS
70
1
h min30
2
h min30
10
h min30
193m
(Beam Distance)
9300cd
(Peak Beam Intensity)
IPX-8, 2m
(Waterproof AND Submersible)
1.5m
(Impact Resistant)
Tactical Momentary Illumination
Simply half press and hold the tail switch to turn on the flashlight, and release
to turn it off.
20150916
Please find us on facebook:
NITECORE Flashlights
Product specificaties
| Merk: | Nitecore |
| Categorie: | Zaklamp |
| Model: | P10 |
Heb je hulp nodig?
Als je hulp nodig hebt met Nitecore P10 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Zaklamp Nitecore
17 November 2024
17 November 2024
17 November 2024
17 November 2024
17 November 2024
17 November 2024
17 November 2024
17 November 2024
17 November 2024
17 November 2024
Handleiding Zaklamp
- Zaklamp Philips
- Zaklamp BEKO
- Zaklamp DeWalt
- Zaklamp Garmin
- Zaklamp Abus
- Zaklamp Alecto
- Zaklamp Aluratek
- Zaklamp Anker
- Zaklamp Ansmann
- Zaklamp Asaklitt
- Zaklamp Brennenstuhl
- Zaklamp Dorr
- Zaklamp Duronic
- Zaklamp Einhell
- Zaklamp Energizer
- Zaklamp Ferm
- Zaklamp Goobay
- Zaklamp Gorenje
- Zaklamp GP
- Zaklamp Greenlee
- Zaklamp Hama
- Zaklamp Hikoki
- Zaklamp HQ
- Zaklamp IVT
- Zaklamp Knog
- Zaklamp Kogan
- Zaklamp Laserliner
- Zaklamp LED Lenser
- Zaklamp Little Tikes
- Zaklamp Livarno
- Zaklamp Makita
- Zaklamp Maktec
- Zaklamp Milwaukee
- Zaklamp Nedis
- Zaklamp Neff
- Zaklamp Parkside
- Zaklamp PCE
- Zaklamp Perel
- Zaklamp Powerfix
- Zaklamp Powerplus
- Zaklamp Pyle
- Zaklamp Rocktrail
- Zaklamp Ryobi
- Zaklamp Sanyo
- Zaklamp Silva
- Zaklamp Silvercrest
- Zaklamp Silverline
- Zaklamp Stanley
- Zaklamp SuperNova
- Zaklamp TFA
- Zaklamp Toolcraft
- Zaklamp Trebs
- Zaklamp Trelock
- Zaklamp Varta
- Zaklamp VDO
- Zaklamp Velleman
- Zaklamp Olympia
- Zaklamp Black And Decker
- Zaklamp GoGEN
- Zaklamp Schwaiger
- Zaklamp Steren
- Zaklamp Barska
- Zaklamp Fenix
- Zaklamp Kayoba
- Zaklamp Klein Tools
- Zaklamp Lupine
- Zaklamp Maglite
- Zaklamp Nebo
- Zaklamp Olight
- Zaklamp Petzl
- Zaklamp Princeton Tec
- Zaklamp Streamlight
- Zaklamp Tecxus
- Zaklamp Vulta
- Zaklamp EMOS
- Zaklamp Celestron
- Zaklamp Blackburn
- Zaklamp Topeak
- Zaklamp Black Diamond
- Zaklamp Coleman
- Zaklamp Cateye
- Zaklamp Spanninga
- Zaklamp Alpha
- Zaklamp Craftsman
- Zaklamp CAT
- Zaklamp WAGAN
- Zaklamp Carson
- Zaklamp Total
- Zaklamp Nordride
- Zaklamp Parat
- Zaklamp Beghelli
- Zaklamp Silva Schneider
- Zaklamp Maverick
- Zaklamp Ledlenser
- Zaklamp SureFire
- Zaklamp Goal Zero
- Zaklamp Livarno Lux
- Zaklamp 4K5
- Zaklamp NEO Tools
- Zaklamp AccuLux
- Zaklamp ArmyTek
- Zaklamp CEL-TEC
- Zaklamp Underwater Kinetics
- Zaklamp MOON
- Zaklamp NightStick
- Zaklamp KSE-Lights
- Zaklamp Alpen Optics
- Zaklamp Arcas
- Zaklamp Coast
- Zaklamp FoxFury
- Zaklamp Eisemann
Nieuwste handleidingen voor Zaklamp
21 December 2024
18 December 2024
18 December 2024
18 December 2024
17 December 2024
17 December 2024
17 December 2024
17 December 2024
17 December 2024
17 December 2024