Nitecore MT2A Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Nitecore MT2A (1 pagina's) in de categorie Zaklamp. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
®
User Manual
Features
LED Premium CREE XP-G R5 LED
Maximum output of up to 280 lumens
High efficiency current circuit board
Maximum runtime of up to 50 hours
Two rapid switching modes suit various user requirements.
User-defined mode allows for customized brightness levels and a
multitude of functions
Intelligent memory functions
Anti-rolling design
Reverse polarity protection
Toughened ultra-clear mineral glass with anti-reflective coating
Aluminum reflector ensures a smooth and powerful beam
Aero grade aluminum alloy
HA III Military grade hard anodized
Detachable two-way anti-rolling clip
Purpose-made rhombic knurling for better grip
IPX-8 standard waterproof (submersible to two meters)
Dimensions
Length: 155mm (6.1)
Head Diameter: 22.56mm (0.92)
Tail Diameter: 21.5mm (0.85”)
Weight: 67grams (2.36oz)(without battery)
Thanks for purchasing NITECORE!
SYSMAX Industry Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address Rm1407-08, Glorious Tower, 850 East Dongfeng Road,
Guangzhou, China 510600
Brightness & Runtime
ALL-ROUND Flashlight Expert
Accessories
Clip, lanyard, spare plastic cap,
and spare O-ring
Battery Options
Please follow our facebook for more info: NITECORE Flashlights
Operation instructions
Battery installation (as the picture shows)
1. Unscrew the tail cap in a counter-clockwise direction.
2. Insert two AA batteries with the positive pole pointing forward (toward the
light head).
Switching ON/OFF
Switch ON: Press the button on the tailcap until a “clickis heard.
Switch OFF: Press the button at the tailcap until a second time until aclick” is
heard.
Mode Switching
The Nitecore MT2A has two modes: Turbo and user-defined. These two modes
can be changed by simply tightening and loosening the flashlight head. Turbo
provides 100% output while user-defined users contains five selectable
sub-modes.
Turbo Mode
Turbo mode is accessed when the MT2A flashlight is switched ON and the
head lightly tightened. While in this mode, momentary illumination can be
achieved by switching off the flashlight and then half pressing and holding the
switch. Momentary illumination can be used as a flashing signal indicator or
apply to various tactical applications.
Note: After three minutes using of turbo mode, the flashlight will lower its
output automatically for preventing overheating, and efficiently ensure the
battery runtime.
User-Defined Mode
User-defined mode is accessed by slightly loosening the flashlight head. In this
mode, lightly and rapidly pressing the switch will cycle through brightness and
other functions in the following order: “High-Mid-Low- SOS-Strobe. Pressing
the switch all the way down will save and memorize a desired setting.
Tips: Make NITECORE MT2A your perfect multi-task flashlight.
NITECORE MT2A flashlights essentially have two modes: Turbo mode (100%
output) and custom mode. Turbo mode is accessed by tightening the flashlight
head while any of one of the four customizable modes (strobe, low, medium
and high) are selected by loosening the head and rapidly pressing the on/off
switch to cycle through the modes. A given mode can be saved by simply turn
off the light while in that mode. Real-world examples include: When used as a
flashlight around the home, the head can be loosened and low level selected in
custom mode, providing long runtimes at a lower light intensity. The same
flashlight could then be taken out and used a law-enforcement duty light, with
user-defined mode set in strobe, making it easy to alternate between turbo
mode and strobe with a simple twist of the flashlight head.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a thin
coating of silicon-based lubricant.
Warranty Service
All NITECORE ® products are warranted for quality. DOA / defective products
can be exchanged for replacement though a local distributor/dealer within the
14 days of purchase. After 14 days, all defective / malfunctioning NITECORE®
products will be repaired free of charge for a period of 18 months from the date
of purchase. After 18 months, a limited warranty applies, covering the cost of
labor and maintenance, but not the cost of accessories or replacement parts.
The warranty is nullified in all of the following situations:
1. The product(s) is/are broken down, reconstructed and/or modified by
unauthorized parties.
2. The product(s) is/are damaged through improper use.
3. The product(s) is/are damaged by leakage of batteries.
For the latest information on NITECORE ® products and services, please
contact your national NITECORE ® distributor or send an email to
service@nitecore.com
TURBO HIGH MID LOW
LUMENS
125
LUMENS
280
LUMENS
50
LUMENS
15
2
h
15
min
5
h
12
h
50
h
115m (Beam Distance)
3300cd (Peak Beam Intensity)
IPX-8, 2m
(Waterproof AND Submersible)
1.5m (Impact Resistant)
SIZE
Nominal voltage
Compatible
Primary AA battery AA 1.5V Y (Recommended)
Rechargeable AA battery AA 1.2V Y (Recommended)
Primary AA Lithium battery L91 1.5V Y (Recommended)
Primary FeLiPO4 battery 14500 3.2V N (Banned)
Rechargeable Li-ion battery 14500 3.7V N (Banned)
NOTICE
Stated data has been
measured according to
the international
flashlight testing
standards ANSI/NEMA
FL1 using two high
quality AA Ni-Mh
rechargeable batteries
(1.2V, 2400mAh) under
laboratory conditions.
The data may vary due
to individual usage
habits and environmental
conditions.
WARNING
Ensure batteries are
inserted with the
positive (+) end
pointing to the head.
The MT2A will not
operate with incorrectly
inserted batteries.
NITECORE (SYSMAX) is a member of PLATO, participating in and helping to develop
the ANSI FL1 standard of measurement. Product testing data is in accordance with
these internationally recognized scientific standards.


Product specificaties

Merk: Nitecore
Categorie: Zaklamp
Model: MT2A

Heb je hulp nodig?

Als je hulp nodig hebt met Nitecore MT2A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Zaklamp Nitecore

Nitecore

Nitecore P23i Handleiding

17 November 2024
Nitecore

Nitecore GEM10UV Handleiding

17 November 2024
Nitecore

Nitecore HA40 Handleiding

17 November 2024
Nitecore

Nitecore GEM8 Handleiding

17 November 2024
Nitecore

Nitecore NU05 Handleiding

17 November 2024
Nitecore

Nitecore GEM8UV Handleiding

17 November 2024
Nitecore

Nitecore HC30 Handleiding

17 November 2024
Nitecore

Nitecore DL10 Handleiding

17 November 2024
Nitecore

Nitecore T2s Handleiding

17 November 2024
Nitecore

Nitecore P16TAC Handleiding

17 November 2024

Handleiding Zaklamp

Nieuwste handleidingen voor Zaklamp

Fenix

Fenix E12 V2.0 Handleiding

19 November 2024
Fenix

Fenix TK16 V2.0 Handleiding

19 November 2024
Fenix

Fenix E09R Handleiding

19 November 2024
Fenix

Fenix HM60R Handleiding

19 November 2024
Ledlenser

Ledlenser T² Handleiding

18 November 2024
Ledlenser

Ledlenser P14 Handleiding

18 November 2024
Ledlenser

Ledlenser F1R Handleiding

18 November 2024
Ledlenser

Ledlenser P2BM Handleiding

18 November 2024
Ledlenser

Ledlenser A3 Handleiding

18 November 2024
Ledlenser

Ledlenser H3 Handleiding

18 November 2024