Nitecore MT1A Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Nitecore MT1A (1 pagina's) in de categorie Zaklamp. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
®
User Manual
Features
LED Premium CREE XP-G2 R5 LED
Maximum output of up to 180 lumens
High efficiency current circuit board
Maximum runtime of up to 60 hours
Two rapid switching modes suit various user requirements.
User-defined mode allows for customized brightness levels and a
multitude of functions
Intelligent memory functions
Anti-rolling design
Reverse polarity protection
Toughened ultra-clear mineral glass with anti-reflective coating
Aluminum reflector ensures a smooth and powerful beam
Aero grade aluminum alloy
HA III Military grade hard anodized
Detachable two-way anti-rolling clip
Purpose-made rhombic knurling for better grip
IPX8 standard waterproof (submersible to two meters)
Dimensions
Length: 105mm (4.13)
Head Diameter: 22.56mm (0.92)
Tail Diameter: 21.5mm (0.85”)
Weight: 55grams (1.94oz)(without battery)
Thanks for purchasing NITECORE!
SYSMAX Innovations Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address: Unit 6355, 5/F, No. 1021 Gaopu Road, Tianhe District,
Guangzhou, 510653, Guangdong, China
Brightness & Runtime
The All-Round Flashlight Expert
Accessories
Clip, lanyard, spare plastic cap,
and spare O-ring
Battery Options
TYPE
Nominal voltage Usability
Primary AA battery AA 1.5V Y (Recommended)
Rechargeable AA battery AA 1.2V Y (Recommended)
Primary AA Lithium battery L91 1.5V Y (Recommended)
Rechargeable Li-ion battery 14500 3.7V N (Banned)
NOTICE
Stated data has been measured according to the international flashlight testing
standards ANSI/NEMA FL1 using one high quality AA Ni-Mh rechargeable battery
(1.2V, 2400mAh) under laboratory conditions. The data may vary due to individual
usage habits and environmental conditions.
Operation instructions
WARNING
Ensure batteries are inserted with the positive (+) end pointing to the head.
The MT1A will not operate with incorrectly inserted batteries.
Switching ON/OFF
Switch ON: Press the button on the tailcap until a “clickis heard.
Switch OFF: Press the button at the tailcap until a second time until a “clickis
heard.
Mode Switching
The Nitecore MT1A has two modes: Turbo and user-defined. These two modes
can be changed by simply tightening and loosening the flashlight head. Turbo
provides 100% output while user-defined users contains five selectable
sub-modes.
Turbo Mode
Turbo mode is accessed when the MT1A flashlight is switched ON and the
head lightly tightened. While in this mode, momentary illumination can be
achieved by switching off the flashlight and then half pressing and holding the
switch. Momentary illumination can be used as a flashing signal indicator or
apply to various tactical applications.
Note: After three minutesusing of turbo mode, the flashlight will lower its
output automatically for preventing overheating, and efficiently ensure the
battery runtime.
User-Defined Mode
User-defined mode is accessed by slightly loosening the flashlight head. In this
mode, lightly and rapidly pressing the switch will cycle through brightness and
other functions in the following order: High-Mid-Low- SOS-Strobe. Pressing
the switch all the way down will save and memorize a desired setting.
Tips: Make NITECORE MT1A your perfect multi-task flashlight.
NITECORE MT1A flashlights essentially have two modes: Turbo mode (100%
output) and custom mode. Turbo mode is accessed by tightening the flashlight
head while any of one of the four customizable modes (strobe, low, medium
and high) are selected by loosening the head and rapidly pressing the on/off
switch to cycle through the modes. A given mode can be saved by simply turn
off the light while in that mode. Real-world examples include: When used as a
flashlight around the home, the head can be loosened and low level selected in
custom mode, providing long runtimes at a lower light intensity. The same
flashlight could then be taken out and used a law-enforcement duty light, with
user-defined mode set in strobe, making it easy to alternate between turbo
mode and strobe with a simple twist of the flashlight head.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a thin
coating of silicon-based lubricant.
Warranty Service
All NITECORE® products are warranted for quality. Any defective / malfunctioning
NITECORE® product can be repaired free of charge for a period of 60 months (5
years) from the date of purchase. Beyond 60 months (5 years), a limited warranty
applies, covering the cost of labor and maintenance, but not the cost of accessories
or replacement parts.
The warranty is nullified in all of the following situations:
1. The product(s) is/are broken down, reconstructed and/or modified by unauthorized
parties.
2. The product(s) is/are damaged through improper use.
3. The product(s) is/are damaged by leakage of batteries.
For the latest information on NITECORE® products and services, please contact a
local NITECORE® distributor or send an email to service@nitecore.com
All images, text and statements specified herein this user manual are for reference
purpose only. Should any discrepancy occurs between this manual and information
specified on www.nitecore.com, information on our official website shall prevail.
SYSMAX Innovations Co., Ltd. reserves the rights to interpret and amend the content
of this document at any time without prior notice.
TURBO HIGH MID LOW SOS STROBE
LUMENS
55
LUMENS
180
LUMENS
180
LUMENS
22
LUMENS
5
1
h
30
min
5
h
30
min
18
h
60
h
_____
_____
_____
LUMENS
180
_____
_____
_____
115m
3350cd
77m
1500cd
55m
755cd
33m
280cd
IPX8, 2m
(Waterproof AND Submersible)
1m
(Impact Resistant)
Battery Installation /
Removal
As illustrated, after unscrewing the
battery cap, insert / remove the
battery(s) and screw to tighten the
battery cap.
Battery installation
1. Unscrew the tail cap in a
counter-clockwise direction.
2. Insert one AA battery or other
compatible batteries with the
positive pole pointing forward
(toward the light head).
MT27061A22
Please find us on facebook:
NITECORE Flashlight
Made in China


Product specificaties

Merk: Nitecore
Categorie: Zaklamp
Model: MT1A

Heb je hulp nodig?

Als je hulp nodig hebt met Nitecore MT1A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Zaklamp Nitecore

Nitecore

Nitecore P23i Handleiding

17 November 2024
Nitecore

Nitecore GEM10UV Handleiding

17 November 2024
Nitecore

Nitecore HA40 Handleiding

17 November 2024
Nitecore

Nitecore GEM8 Handleiding

17 November 2024
Nitecore

Nitecore NU05 Handleiding

17 November 2024
Nitecore

Nitecore GEM8UV Handleiding

17 November 2024
Nitecore

Nitecore HC30 Handleiding

17 November 2024
Nitecore

Nitecore DL10 Handleiding

17 November 2024
Nitecore

Nitecore T2s Handleiding

17 November 2024
Nitecore

Nitecore P16TAC Handleiding

17 November 2024

Handleiding Zaklamp

Nieuwste handleidingen voor Zaklamp