Nitecore MH1A Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Nitecore MH1A (1 pagina's) in de categorie Zaklamp. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/1
®
User Manual
Features
• Premium CREE XM-L2 T6 LED
• Maximum output of 600 lumens
• High efficiency regulation circuit
• Maximum runtime of up to 23 hours
• Intelligent charging circuit with voltage detection charges safely and rapidly
• Integrated micro USB charging port is water, dust and impact resistant.
• Multiple output modes are conveniently accessed via rapid rotary switch
• User-defined mode provides customized brightness levels plus strobe and SOS
modes.
• Intelligent memory function stores preferred brightness setting
• Broad voltage circuit accepts both 14500 battery and AA battery
• Optimized ultra-precise reflector offers a longer beam distance than competing
products
• Waterproof in accordance with IPX-8 (submersible to two meters)
• Toughened ultra-clear mineral glass with anti-reflective coating
• Constructed from aerospace-grade aluminum alloy
• HAIII military grade hard-anodized
• Reverse polarity protection
• Detachable two-way anti-rolling clip
• Anti-rolling design
Dimensions
Length: 127mm (5”)
Head Diameter: 25.4mm (1”)
Tail Diameter: 21.5mm (0.85” )
Weight: 75grams (1.62oz)(without battery)
Thanks for purchasing NITECORE!
SYSMAX Industry Co., Ltd.
TEL: +86-20-83862000 FAX: +86-20-83882723
E-mail: info@nitecore.com Web: www.nitecore.com
Address： Rm1407-08, Glorious Tower, 850 East Dongfeng Road,
Guangzhou, China 510600
Battery Options
The All-Round Flashlight Expert
Operation instructions
Battery installation (see adjacent diagram)
1. Unscrew the tail cap in a counter-clockwise
direction.
2. Insert one 14500 battery with the
positive pole pointing forward (toward the
light head).
NOTE:
Ensure batteries are inserted with the
positive (+) end pointing to the head. The
MH1A will not operate with incorrectly
inserted batteries.
Charging indicator light
1. Connect the charging cable to the flashlight and the A/C power adapter to the wall
outlet as shown in the adjacent image. Fully charging a depleted 14500 battery
takes approximately 2 hours.
2. Under normal charging conditions, the red indicator light near the charging port will
blink twice every second.
3. If a problem is detected during the charging process, the MH1A will stop charging
and the red indicator will blink rapidly. This is usually caused by faulty or
incorrectly inserted batteries.
4. When charging is complete, the red indicator will illuminate steadily.
Accessories
Nitecore 14500 Li-ion battery(NL147),
lanyard, USB cable, clip, holster,
spare switch cap and spare O-ring
*Warning: Charge 14500 rechargeable Li-ion batteries only, do not attempt to
charge non-rechargeable batteries, i.e. AA batteries.
Brightness & Runtime
NOTICE
Stated data has been
measured according to
the international
flashlight testing
standards ANSI/NEMA
FL1 using one NITECORE
14500 battery (3.7V,
750mAh) under
laboratory conditions.
The data may vary due
to individual usage
habits and environmental
conditions.
NITECORE (SYSMAX) is a member of PLATO, participating in and helping to develop
the ANSI FL1 standard of measurement. Product testing data is in accordance with
these internationally recognized scientific standards.
Caution:
The MH1A needs to be turned on in
order to enter charging mode.
Switching ON/OFF
To switch ON: Press the button on the tailcap until a “click” is heard.
To switch OFF: Press the button on the tailcap a second time until a “click” is heard.
Mode Switching
The Nitecore MH1A has two modes: Turbo and user-defined. These two modes can
be changed by simply tightening and loosening the flashlight head. Turbo provides
100% output while user-defined contains five selectable sub-modes.
Turbo Mode
Turbo mode provides an output of 550 lumens and is accessed when the flashlight is
switched ON with the head lightly tightened. While in this mode, momentary
illumination can be achieved by switching off the flashlight and then half pressing and
holding the switch.
Note: After three minutes of use in turbo mode, the flashlight will lower its
output automatically to preventing overheating and increase runtime.
User-Defined Mode
User-defined mode is accessed by slightly loosening the flashlight head. In this mode,
lightly and rapidly pressing the switch will cycle through brightness and other
functions in the following order: “High-Mid-Low-SOS-Strobe”. Pressing the switch all
the way down will save and memorize a desired setting.
Tips: Make NITECORE MH1A your perfect Multitask Hybrid flashlight.
NITECORE MH1A flashlights essentially have two modes: Turbo mode (100% output)
and custom mode. Turbo mode is accessed by tightening the flashlight head while
any of the five customizable modes (strobe, SOS, low, medium and high) are selected
by loosening the head and rapidly pressing the on/off switch to cycle through the
modes. A given mode can be saved by simply turn off the light while in that mode.
Real-world examples include: When used as a flashlight around the home, the head
can be loosened and low level selected in custom mode, providing long runtimes at a
lower light intensity. The same flashlight could then be taken out and used a
law-enforcement duty light, with user-defined mode set in strobe, making it easy to
alternate between turbo mode and strobe with a simple twist of the flashlight head.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a thin coating
of silicon-based lubricant.
Warranty Service
All NITECORE
® products are warranted for quality. DOA / defective products can be
exchanged for replacement though a local distributor/dealer within the 14 days of
purchase. After 14 days, all defective / malfunctioning NITECORE
® products will be
repaired free of charge for a period of 18 months from the date of purchase. After 18
months, a limited warranty applies, covering the cost of labor and maintenance, but
not the cost of accessories or replacement parts. The warranty is nullified in all of the
following situations:
1. The product(s) is/are broken down, reconstructed and/or modified by unauthorized
parties.
2. The product(s) is/are damaged through improper use.
3. The product(s) is/are damaged by leakage of batteries.
For the latest information on NITECORE
® products and services, please contact your
national NITECORE
® distributor or send an email to service@nitecore.com
Charging Function
The MH1A is capable of charging a protected 14500 Li-ion battery via the included
USB cable. Simply install a protected 14500 Li-ion cell, plugging one end of the USB
cable into the flashlight and the other end into a universal USB port / adaptor and the
MH1A will take care of the rest.
Please follow our facebook for
more info: NITECORE Flashlights
Primary AA battery * AA 1.5V
Rechargeable AA battery * AA 1.2V
Primary AA Lithium battery * L91 1.5V
Primary LiFePO4 battery * 14500 3.2V
Rechargeable Li-ion battery 14500 3.7V
SIZE
Nominal voltage
Compatible
Yes (Compatible but can
NOT be recharged)
Yes (Compatible but can
NOT be recharged)
Yes (Compatible but can
NOT be recharged)
Yes (Compatible but can
NOT be recharged)
Yes (Compatible and
can be recharged)
TURBO HIGH MID LOW
LUMENS
89
LUMENS
600
LUMENS
20
LUMENS
7
4
h
11
h
30
min
45
min
23
h
155m (Beam Distance)
6000cd (Peak Beam Intensity)
IPX-8, 2m
(Waterproof AND Submersible)
1.5m (Impact Resistant)
Product specificaties
| Merk: | Nitecore |
| Categorie: | Zaklamp |
| Model: | MH1A |
Heb je hulp nodig?
Als je hulp nodig hebt met Nitecore MH1A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Zaklamp Nitecore
31 Augustus 2024
31 Augustus 2024
2 Juli 2024
2 Juli 2024
9 Juni 2024
5 Mei 2024
4 Mei 2024
4 Mei 2024
28 Februari 2024
30 Augustus 2023
Handleiding Zaklamp
- Zaklamp Philips
- Zaklamp BEKO
- Zaklamp DeWalt
- Zaklamp Garmin
- Zaklamp Abus
- Zaklamp Alecto
- Zaklamp Aluratek
- Zaklamp Anker
- Zaklamp Ansmann
- Zaklamp Asaklitt
- Zaklamp Brennenstuhl
- Zaklamp Dorr
- Zaklamp Duronic
- Zaklamp Einhell
- Zaklamp Energizer
- Zaklamp Ferm
- Zaklamp Goobay
- Zaklamp Gorenje
- Zaklamp GP
- Zaklamp Greenlee
- Zaklamp Hama
- Zaklamp Hikoki
- Zaklamp HQ
- Zaklamp IVT
- Zaklamp Knog
- Zaklamp Laserliner
- Zaklamp LED Lenser
- Zaklamp Little Tikes
- Zaklamp Livarno
- Zaklamp Makita
- Zaklamp Maktec
- Zaklamp Milwaukee
- Zaklamp Nedis
- Zaklamp Neff
- Zaklamp Parkside
- Zaklamp PCE
- Zaklamp Perel
- Zaklamp Powerfix
- Zaklamp Powerplus
- Zaklamp Pyle
- Zaklamp Rocktrail
- Zaklamp Ryobi
- Zaklamp Sanyo
- Zaklamp Silva
- Zaklamp Silvercrest
- Zaklamp Silverline
- Zaklamp Stanley
- Zaklamp SuperNova
- Zaklamp TFA
- Zaklamp Toolcraft
- Zaklamp Trebs
- Zaklamp Trelock
- Zaklamp Varta
- Zaklamp VDO
- Zaklamp Velleman
- Zaklamp Olympia
- Zaklamp Black And Decker
- Zaklamp GoGEN
- Zaklamp Schwaiger
- Zaklamp Steren
- Zaklamp Barska
- Zaklamp Fenix
- Zaklamp Kayoba
- Zaklamp Klein Tools
- Zaklamp Lupine
- Zaklamp Maglite
- Zaklamp Nebo
- Zaklamp Olight
- Zaklamp Petzl
- Zaklamp Princeton Tec
- Zaklamp Streamlight
- Zaklamp Tecxus
- Zaklamp Vulta
- Zaklamp EMOS
- Zaklamp Celestron
- Zaklamp Blackburn
- Zaklamp Topeak
- Zaklamp Black Diamond
- Zaklamp Coleman
- Zaklamp Cateye
- Zaklamp Spanninga
- Zaklamp Alpha
- Zaklamp Craftsman
- Zaklamp CAT
- Zaklamp WAGAN
- Zaklamp Carson
- Zaklamp Nordride
- Zaklamp Parat
- Zaklamp Beghelli
- Zaklamp Silva Schneider
- Zaklamp Maverick
- Zaklamp Ledlenser
- Zaklamp SureFire
- Zaklamp Goal Zero
- Zaklamp 4K5
- Zaklamp AccuLux
- Zaklamp ArmyTek
- Zaklamp CEL-TEC
- Zaklamp Underwater Kinetics
- Zaklamp MOON
- Zaklamp NightStick
- Zaklamp KSE-Lights
- Zaklamp Alpen Optics
- Zaklamp Arcas
- Zaklamp Coast
- Zaklamp FoxFury
Nieuwste handleidingen voor Zaklamp
15 Oktober 2024
30 September 2024
30 September 2024
24 September 2024
11 September 2024
11 September 2024
26 Augustus 2024
26 Augustus 2024
18 Augustus 2024
18 Augustus 2024