Moxa NPort 5130A Handleiding

Moxa Server NPort 5130A

Lees hieronder de 📖 handleiding in het Nederlandse voor Moxa NPort 5130A (4 pagina's) in de categorie Server. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

— 1— — 2 — — 3 —

NPort 5100A Series

Quick Installation Guide

Second Edition, June 2010

1. Overview

NPort 5100A series device servers are compact, palm-sized data

communication devices that allow you to control RS-232 (NPort 5110A),

RS-422/485 (NPort 5130A), and RS-232/422/485 (NPort 5150A) serial

devices over a TCP/IP-based Ethernet.

Note: “-T” indicates an extended temperature model.

2. Package Checklist

Before installing the NPort 5100A series device server, verify that the

package contains the following items:

y 1 NPort 5100A serial device server

y Power Adaptor (NPort 5100A-T doesn't include this accessory)

y 4 stick-on pads

y Document & Software CD

y Quick Installation Guide

y Product Warranty Statement

Optional Accessory

y DK-35A: DIN-Rail Mounting Kit (35 mm)

Notify your sales representative if any of the above items are missing or

damaged.

3. Hardware Introduction

As shown in the following figures, NPort 5100A series device servers

have one male DB9 port for transmitting RS-232 (NPort 5110A),

RS-422/485 (NPort 5130A), or RS-232/422/485 (NPort 5150A) serial

data.

Top Panel View

DIN-Rail

screw hole

Wallmount

screw hole

Ready

Link

Tx/Rx

Serial Device Server

5110A

10/100M

Ethernet

RESET

12-48VDC

Port 1 RS-232

Male DB9 serial port

Front Panel View

RJ45 10/100M Ethernet port

Reset button

Power input

Rear Panel View

Stick-on pad

NOTE: The NPort 5110A, NPort 5130A, and NPort 5150A have the

same form factor.

Reset Button—Press and hold the Reset button for 5 seconds to load

factory defaults: Use a pointed object, such as a straightened paper clip or

toothpick, to depress the reset button. This will cause the Ready LED to

blink on and off. The factory defaults will be loaded once the Ready LED

stops blinking (after about 5 seconds). At this point, release the reset

button.

LED Indicators—NPort 5100A’s top panel has three LED indicators,

which are described in the following table.

LED

Name

LED

Color LED Function

Steady on: Power is on and the NPort is booting up.

Red Blinking: Indicates an IP conflict, or DHCP or

BOOTP server is not responding properly.

Steady on: Power is on and the NPort is functioning

normally.

Green Blinking: The NPort has been located by the NPort

Administrator’s Location function.

Ready

Off Power is off, or a power error..

Orange 10 Mbps Ethernet connection.

Green 100 Mbps Ethernet connection. Link

Off Ethernet cable is disconnected.

Orange Serial port is receiving data.

Tx/Rx

Green Serial port is transmitting data.

Off No data is being transmitted or received through the

serial port.

Adjustable pull high/low resistor for RS-422/485 (150 KΩ or 1 KΩ)

JP3

JP4

Jumpers are used to set the pull high/low

resistor values. The default is 150 KΩ. Short

the jumpers to set this value to 1 KΩ. Do not

use the 1 KΩ setting with RS-232 mode, since

doing so will degrade the RS-232 signals and

shorten the communication distance.

4. Hardware Installation Information

STEP 1: After removing the NPort 5100A series device server from the

box, the first thing you should do is connect the power adaptor.

STEP 2: Connect the NPort 5100A series device server to a network. Use

a standard straight-through Ethernet cable to connect to a hub or switch.

When setting up or testing the NPort 5100A series device server, you

might find it convenient to connect directly to your computer’s Ethernet

port. In which case, use a cross-over Ethernet cable.

STEP 3: Connect the NPort 5100A series device server’s serial port to a

serial device.

STEP 4: Placement options.

In addition to placing the NPort 5100A on a desktop or other horizontal

surface, you may also make use of the DIN-Rail or Wall Mount options,

as illustrated below.

Wall Mount DIN-Rail

Ready

Link

Tx/Rx

Serial Device Server

5110A

10/100M

Ethernet

RESET

Port 1 RS-232

12-48 VDC

P/N: 1802051000021

—4— —5 — — 6 —

5. Software Installation Information

To install NPort Administration Suite, insert the NPort Document &

Software CD into your computer’s CD-ROM drive. Once the NPort

Installation CD window opens, click on the Installation button, and then

follow the instructions on the screen.

To view detailed information about NPort Administration Suite, click

on the Documents button, and then select “NPort 5100A Series User’s

Guide” to open the pdf version of the user’s guide.

6. Pin Assignments

Ethernet Port Pinouts

Pin Number Ethernet

1 Tx+

2 Tx-

3 Rx+

6 Rx-

NPort 5110A—DB9 male (RS-232) port pinouts

1 5

6 9

Pin Number RS-232

1 DCD

2 RxD

3 TxD

4 DTR

5 GND

6 DSR

7 RTS

8 CTS

9 ---

NPort 5130A—DB9 male (RS-422/485) port pinouts

1 5

6 9

Pin Number RS-422/485 (4W) RS-485 (2W)

1 TXD-(A) ---

2 TXD+(B) ---

3 RXD+(B) Data+(B)

4 RXD-(A) Data-(A)

5 GND GND

6 --- ---

7 --- ---

8 --- ---

9 --- ---

NPort 5150A—DB9 male (RS-232/422/485) port pinouts

1 5

6 9

Pin Number RS-232 RS-422/485 (4W) RS-485 (2W)

1 DCD TXD-(A) ---

2 RxD TXD+(B) ---

3 TxD RXD+(B) Data+(B)

4 DTR RXD-(A) Data-(A)

5 GND GND GND

6 DSR --- ---

7 RTS --- ---

8 CTS --- ---

9 --- --- ---

7. Specifications

Power Requirements

Power Input 12 to 48 VDC

Power Consumption NPort 5110A: 82.5 mA@12V, 47.3 mA@24V

NPort 5130A: 89.1 mA@12V, 49.5 mA@24V

NPort 5150A: 92.4 mA@12V, 52.8 mA@24V

Operating Temperature 0 to 60°C (32 to 140°F), for standard models

-40 to 75°C (-40 to 167°F), for -T models

Operating Humidity 5 to 95% RH

75.2 × 80 × 22 mm

(2.96 × 3.15 × 0.87 in)

Åwith ears Dimensions

52 × 80 × 22 mm

(2.05 × 3.15 × 0.89 in)

Åwithout ears

Serial Line Protection 15 KV ESD for serial port

Level 1 Surge, EN61000-4-5

Magnetic Isolation 1.5 KV for Ethernet

Power Line Protection Level 2 Burst (EFT), EN61000-4-4

Level 3 Surge, EN61000-4-5

Regulatory Approvals FCC Class A, CE Class A, UL, LVD

Click here for online support:

www.moxa.com/support

The Americas: +1-714-528-6777 (toll-free: 1-888-669-2872)

Europe: +49-89-3 70 03 99-0

Asia-Pacific: +886-2-8919-1230

China: +86-21-5258-9955 (toll-free: 800-820-5036)

Reproduction without permission is prohibited.

Product specificaties

Merk:	Moxa
Categorie:	Server
Model:	NPort 5130A
Gewicht:	340 g
Soort serieële aansluiting:	RS-422, RS-485
Aantal Ethernet LAN (RJ-45)-poorten:	1
Certificering:	CE, FCC
Ingangsspanning:	12 - 48 V
Ethernet LAN, data-overdrachtsnelheden:	10, 100 Mbit/s
Temperatuur bij opslag:	-40 - 85 °C
Compatibele besturingssystemen:	SCO Unix, OpenServer\nUnixWare v2.1, v7\nUnix SVR 4.2\nUnix QNX 4.25, QNX 6\nSolaris 10\nFreeBSD\nAIX 5.x\nHP-UX 11i\nMac OS v10.3\nLinux v2.4.x, v2.6.x
Ondersteunde netwerkprotocollen:	ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, HTTP, SMTP, IGMP v1/2
Veiligheid:	UL, LVD
Afmetingen (B x D x H):	52 x 80 x 22 mm
Seriële poort(en):	1
Beheerprotocollen:	SNMP v1
Bedrijfstemperatuur (T-T):	0 - 60 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent
Isolatie:	1.5 kV