Moxa NPort 5430 Handleiding

Moxa Server NPort 5430

Lees hieronder de 📖 handleiding in het Nederlandse voor Moxa NPort 5430 (4 pagina's) in de categorie Server. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

P/N: 1802054000312

NPort 5400 Series Quick

Installation Guide

Sixth Edition, January 2011

1. Overview

Welcome to Moxa NPort 5400, a 4 port communication device that

allows you to control RS-232 (for NPort 5410), RS-422/485 (for

NPort 5430/5430I) or RS-232/422/485 (for NPort 5450/5450I)

serial devices over a TCP/IP based Ethernet. Besides, NPort

5450-T and NPort 5450I-T are designed to use in wide

temperature environment.

NPort 5400 Series is a Moxa Green Product. Moxa’s Green Products

satisfy the RoHS directive of the European Parliament, and

accordingly, do not contain cadmium and cadmium compounds,

hexavalent chromium compounds, lead and lead compounds,

mercury and mercury compounds, PBBs (polybrominated

biphenyls), or PBDEs (polybrominated diphenyl ethers).

2. Package Checklist

Before installing NPort 5400, verify that the package contains the

following items:

• 1 NPort 5400 4-port Serial Device Server

• Power Adaptor (NPort 5450-T and 5450I-T do not include this

accessory)

• Power jack to 3-pin terminal block adaptor

• Wall mount kit

• Documentation and software CD

• Quick Installation Guide

• Warranty card

Optional Accessories

• DK-35A For 35 mm DIN-Rail; includes 4 screws

Notify your sales representative if any of the above items is missing or

damaged.

3. Hardware Introduction

As shown in the following figures, NPort 5410 has 4 Male DB9 ports,

for the RS-232 interface, NPort 5430/5430I has 4 5-pin terminal

blocks, for the RS-422/485 interface, and NPort 5450/5450I has 4

Male DB9 ports, for the RS-232/422/485 interface.

NPort 5410/5450/5450I

RJ45 10/100 Mbps Ethernet port

Power Jack Power Input

Terminal Block power input

RESET

LCM display panelIndicator LEDs Input buttons

Male DB9 serial port

Serial Device Server

5410

NP5 4 1 0 _61405

192 . 1 6 8.127.254

LAN V+ V-

Port 1

RS-422/785

Port 2

RS-422/785

Port 3

RS-422/785

Port 4

RS-422/785

NPort 5430/5430I

RJ45 10/100 Mbps Ethernet port

Terminal Block power input

RESET

Power Jack Power Input

M display panelIndicator LEDs Input buttons

Serial Device Server

5430

NP 5410_61405

192.168.127.254

LAN V+ V-

RS-422/485 Terminal Block

T+ T- R+

D+

R-

D-

GND T+ T- R+

D+

R-

D-

GND T+ T- R+

D+

R-

D-

GND T+ T- R+

D+

R-

D-

GND

Port 1

RS-422/785

Port 2

RS-422/785

Port 3

RS-422/785

Port 4

RS-422/785

NPort 5450-T/5450I-T

RJ45 10/100 Mbps Ethernet port

Terminal Block power input

RESET

Indicator LEDs

Power Jack Power Input

Male DB9 serial port

Serial Device Server

5450

LAN V+ V-

Port 1

RS-422/785

Port 2

RS-422/785

Port 3

RS-422/785

Port 4

RS-422/785

Reset Button—Press the Reset button continuously for 5 sec to

load factory defaults: Use a pointed object, such as a straightened

paper clip or toothpick, to press the reset button. This will cause

the Ready LED to blink on and off. The factory defaults will be

loaded once the Ready LED stops blinking (after about 5 seconds).

At this point, you should release the reset button.

LED Indicators—NPort 5400’s top panel contains six LED

indicators, as described in the following table.

LED

Name

LED Color

LED Function

red Steady on: Power is on and NPort is

booting up.

Blinking: Indicates an IP conflict, or

DHCP or BOOTP server did not respond

properly.

green Steady on: Power is on and NPort is

functioning normally.

Blinking: The NPort has been located

by NPort Administrator’s Location function

Ready

off Power is off, or power error condition

exists.

orange 10 Mbps Ethernet connection.

green 100 Mbps Ethernet connection.

Ethernet

off Ethernet cable is disconnected, or has a

short.

orange Serial port is receiving data.

green Serial port is transmitting data.

P1, P2,

P3, P4

off No data is being transmitted or received

through the serial port.

LCM Display Panel (not support in -T model)—When the NPort

5400 unit is powered up, you will a see a display similar to:

P 5

0 5

1 9 2

. 1

7 . 2 5 4

This is where NP5410_61405 is the server’s name, and

192.168.127.254 is the server’s IP address.

LCM Panel Operation (not support in -T model)—There are

four buttons on NPort 5400’s top panel used to operate the

server’s LCM panel. Going from left to right, the buttons are:

Button Action

MENU Activates the main menu, or returns to a lower level.

＾ Scrolls up through a list of items shown on the LCM

panel’s second line.

﹀ Scrolls down through a list of items shown on the LCM

panel’s second line.

SEL Selects the option listed on the LCM panel’s second

line.

Detailed LCM Panel Operating instructions can be found on the

CD-ROM in the “NPort 5400 Series User’s Manual.”

– 1 – – 2 – – 3 –

– 4 – – 5 – – 6 –

www.moxa.com/support

The Americas: +1-714-528-6777 (toll-free: 1-888-669-2872)

Europe: +49-89-3 70 03 99-0

Asia-Pacific: +886-2-8919-1230

China: +86-21-5258-9955 (toll-free: 800-820-5036)

4. Hardware Installation Procedure

STEP 1: After removing NPort 5400 from the box, the first thing

you should do is attach the power adaptor.

STEP 2: Connect NPort 5400 to a network. Use a standard

straight-through Ethernet cable to connect to a Hub or Switch.

When setting up or testing NPort 5400, you might find it

convenient to connect directly to your computer’s Ethernet port. In

this case, use a cross-over Ethernet cable.

STEP 3: Connect NPort 5400’s serial port to a serial device.

STEP 4: Placement Options

Wall or Cabinet Mounting

The NPort 5400 comes with two metal attachment plates for

attaching the NPort 5400 to a wall or the inside of a cabinet. First,

use two screws per bracket to attach the brackets to the rear of the

NPort 5400. Next, use two screws per bracket to

attach the NPort 5400 to a wall or cabinet.

The heads of the screws should be less than 6.0 mm

in diameter, and the shafts should be less than 3.5

mm in diameter, as shown by the figure at the right.

DIN-Rail Mounting

DIN-rail attachments can be purchased separately to attach the

product to a DIN-rail. When snapping the attachments to the

DIN-rail, make sure that the stiff metal springs are at the top.

Wall Mount DIN-Rail

4 Port Device Server

5410

NP61405 SN:61405

192.168.127.254

Port 1

RS-4 22 /785

Port 2

RS-4 22 /785

Port 3

RS-4 22 /785

Port 4

RS-4 22 /785

5. Pull High/low Resistors Setting for the

RS-485 Port

DIP switches on the bottom of NPort 5400 are used to set the pull

high/low resistor values for each serial port.

6. Pull High/low Resistors for the RS-485

Port

1 2 3

Pull High Pull Low Terminator

ON 1KΩ 1K 120Ω Ω

Default OFF 150KΩ 150KΩ ---

7. Software Installation Information

To install NPort Administration Suite, insert the NPort

Document & Software CD into your computer’s CD-ROM drive.

Once the NPort Installation CD window opens, click on the

Installation button, and then follow the instructions on the screen.

To view detailed information about NPort Administration Suite,

click on the Documents button, and then select “NPort 5400

Series User’s Manual” to open the pdf version of this user’s guide.

8. Pin Assignments and Cable Wiring

DB9 Male Port Pinouts

Pin assignments apply to NPort 5410 (RS-232 only), 5450, and

5450I.

DB9 Male

1 5

6 9

Pin RS-232 RS-422/

4-wire RS-485

2-wire

RS-485

1 DCD TxD-(A) ---

2 RxD TxD+(B) ---

3 TxD RxD+(B) Data+(B)

4 DTR RxD-(A) Data-(A)

5 GND GND GND

6 DSR --- ---

7 RTS --- ---

8 CTS --- ---

9 --- --- ---

DB9 Wiring-NPort 5410/5450/5450I

DB9 Female to DB9 Male DB9 Female to DB25 Male

NPort

Signal Signal

DCD

RxD

TxD

DTR

GND

DSR

RTS

CTS

DCD

TxD

RxD

DSR

GND

DTR

CTS

RTS

RS-232

Device

gniriW elbaC

DB9 Male DB9 FemaleDB9

Male

DB9

Female

NPort

Signal Signal

DCD

RxD

TxD

DTR

GND

DSR

RTS

CTS

DCD

TxD

RxD

DSR

GND

DTR

CTS

RTS

RS-232

Device

gniriW elbaC

DB25 Male DB9 FemaleDB9

Male

DB25

Female

Terminal Block Wiring- NPort 5430/5430I

Rx+

T+

GND

Tx+ / Data+

/ Data

GND

R+ / D+

/ D

Serial Device

Signals

NPort 5430/5430I

Terminal Block

9. Environmental Specifications

Power requirements

Input Voltage: 12 to 48VDC

Power Consumption:

NPort 5410 350 mA @ 12 V, 190 mA @ 24 V

NPort 5430 320 mA @ 12 V, 175 mA @ 24 V

NPort 5430I 530 mA @ 12 V, 280 mA @ 24 V

NPort 5450 350 mA @ 12 V, 190 mA @ 24 V

NPort 5450I 554 mA @ 12 V, 294 mA @ 24 V

Operating temp.

Standard Models: 0 to 55°C (32 to 131°F)

Wide Temp. Models: -40 to 75°C (-40 to 167°F)

Operating humidity 5 to 95% RH

Dimensions (W×D×H) 158 × 33 × 103 mm

6.22 × 1.3 × 4.06 in

Serial line protection 15 KV ESD for serial port, 2 KV

isolation protection (NPort

5430I/5450I)

Magnetic isolation 1.5 KV for Ethernet

Power line protection Level 2 Burst (EFT), EN61000-4-4

Level 2 Surge, EN61000-4-5

Regulatory approvals FCC Class A, CE Class A, UL, DNV,

LVD

6.0 mm

3.5 mm

Product specificaties

Merk:	Moxa
Categorie:	Server
Model:	NPort 5430
Gewicht:	740 g
Soort serieële aansluiting:	RS-422/485
Aantal Ethernet LAN (RJ-45)-poorten:	1
Certificering:	CE, FCC, EN 55022 Class A, FCC Part 15 Subpart B Class A, \r\nEN 55024, EN 60601-1-2 Class B, EN 55011
Ingangsspanning:	12 - 48 V
Ethernet LAN, data-overdrachtsnelheden:	10, 100 Mbit/s
Temperatuur bij opslag:	-40 - 85 °C
Ondersteunde netwerkprotocollen:	ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, HTTP, SMTP, SNTP, Rtelnet, ARP
Veiligheid:	UL 60950-1, EN 60950-1
Datastroombeheer:	Ja
Link/Act LED:	Ja
Seriële poort(en):	4
Beheerprotocollen:	SNMP v1
Bedrijfstemperatuur (T-T):	0 - 55 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent
Isolatie:	1.5 kV
Baud snelheid:	921.6 Kbit/s