Moxa NPort 6250-M-SC Handleiding

Moxa Server NPort 6250-M-SC

Lees hieronder de 📖 handleiding in het Nederlandse voor Moxa NPort 6250-M-SC (6 pagina's) in de categorie Server. Deze handleiding was nuttig voor 61 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
P/N: 1802061500019
*1802061500019*
NPort 6150/6250 Series
Quick Installation Guide
Vers 21ion 11.1 , January 20
Technical Support Contact Information
www.moxa.com/support

. A 2021 Moxa Inc ll rights reserved.
- - 2
Overview
The NPort 6150/6250 Series secure serial device servers provide reliable
serial- -to Ethernet connectivity for a wide range of serial devices. The
NPort 6150/6250 support TCP Server, TCP Client, UDP, and
Pair-Connection operation modes to ensure the compatibility of network
software. In addition, the NPort 6150/6250 also support Secure TCP
Server, Secure TCP Client, Secure Pair- Connection, and Secure Real COM
modes for security critical applications such as banking, telecom, access
control, and remote site management.
Package Checklist
Before installing an NPort 6150/6250 secure device server, verify that the
package contains the following items:
• 2 NPort 6150 or NPort 6 50
• a ( - Power dapter does not apply to T models)
• w - 2 all mount ears
• Documentation
• i g Quick nstallation uide (this guide)
• ca Warranty rd
Optional Accessories
• - -r DK 35A: DIN ail mounting kit (35 mm)
• - - - CBL RJ45M9 150: 8 pin RJ45 to male DB9 cable
• - - - CBL RJ45M25 150: 8 pin RJ45 to male DB25 cable
NOTE: Please notify your sales representative if any of the above items
are missing or damaged.
NOTE
The operating temperature of the power adapter in the box is
from 0 to 40°C. If your application is out of this
range, please use
a power adapter supplied by UL Listed External Power Supply
(The power output meets SELV and LPS and rated 12
to 48 VDC
;
the minimum current is 0.43 A).
Hardware Introduction
NPort 6150
- - 3
NPort 6250
Reset Button—Press the Reset Button continuously for 5 sec to load
factory defaults. Use a pointed object, such as a straightened paper clip or
toothpick, to press the reset button. This will cause the Ready LED to blink
on and off. The factory defaults will be loaded once the Ready LED stops
blinking (after about 5 seconds). At this point, you should release the
reset button.
LED Indicators
LED Name
LED Color
LED Function
PWR
Red
Power is being supplied to the power input.
Ready
R ed
Steady on
Power is on and the NPort is
booting up.
Blinking
Indicates an IP conflict, or, the
DHCP or BOOTP server did not
respond properly or a relay
output occurred. Check the relay
output first. If after resolving the
relay output the RDY LED is still
blinking, then there is an IP
conflict, or the DHCP or BOOTP
server did not respond properly.
G reen
Steady on
Power is on and the NPort is
functioning normally.
Blinking The device server has been
located by the Administrator’s
Location function.
Off
Power is off, or power error condition exists.
Link
Orange
10 Mbps Ethernet connection
G reen
100 Mbps Ethernet connection
O ff
Ethernet cable is disconnected, or has a short.
P1 , P2
Orange
Serial port is receiving data.
Green
Serial port is transmitting data.
Off
No data is being transmitted or received
through the serial port.


Product specificaties

Merk: Moxa
Categorie: Server
Model: NPort 6250-M-SC
Gewicht: 730 g
Soort serieële aansluiting: RS-232/422/485
Aantal Ethernet LAN (RJ-45)-poorten: 1
Certificering: CE, FCC
Ingangsspanning: 12 - 48 V
Ethernet LAN, data-overdrachtsnelheden: 10, 100 Mbit/s
Ondersteunde beveiligingsalgoritmen: 3DES, 802.1x RADIUS, DES, HTTPS, SSH, SSL/TLS
Temperatuur bij opslag: -20 - 85 °C
Compatibele besturingssystemen: Windows 95, 98, ME, NT, 2000, XP, 2003, Vista, XP x64, 2003 x64, Vista x64;\nSCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i
Ondersteunde netwerkprotocollen: ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, HTTP, SMTP, ARP, PPPoE, DDNS
Veiligheid: UL (UL60950-1), TÃœV (EN60950-1)
Afmetingen (B x D x H): 89 x 111 x 28 mm
Seriële poort(en): 2
Beheerprotocollen: SNMP V1/V2c/V3
Bedrijfstemperatuur (T-T): 0 - 55 °C
Relatieve vochtigheid in bedrijf (V-V): 5 - 95 procent
Isolatie: 1.5 kV
Connectivity LEDs: 7
Overspanningsbeveiliging in voltage: 0.5 kV

Heb je hulp nodig?

Als je hulp nodig hebt met Moxa NPort 6250-M-SC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Server Moxa

Handleiding Server

Nieuwste handleidingen voor Server