Milwaukee M18 Fuel Super Hawg 2809-22 Handleiding

Milwaukee Boormachine M18 Fuel Super Hawg 2809-22

Lees hieronder de 📖 handleiding in het Nederlandse voor Milwaukee M18 Fuel Super Hawg 2809-22 (20 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
Cat. No. / No de cat.
2809-20
2811-20
M18 FUEL SUPER HAWG RIGHT ANGLE DRILLS
PERCEUSE SUPER HAWG M18 FUELDE ÉLECTRICIEN
TALADRO SUPER HAWG M18 FUEL PARA ELECTRICISTAS
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
3
BATTERY TOOL USE AND CARE
Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of re when used
with another battery pack.
Use power tools only with specically designated
battery packs. Use of any other battery packs may
create a risk of injury and re.
When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a re.
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
Do not use a battery pack or tool that is dam-
aged or modied. Damaged or modied batteries
may exhibit unpredictable behavior resulting in re,
explosion or risk of injury.
Do not expose a battery pack or tool to re or
excessive temperature. Exposure to re or tem-
perature above 265°F (130°C) may cause explosion.
Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specied in the instructions. Charging im-
properly or at temperatures outside the specied range
may damage the battery and increase the risk of re.
SERVICE
Have your power tool serviced by a qualied
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
SUPER HAWG RIGHT ANGLE
DRILLS
Safety Instructions for all operations
Use auxiliary handle(s). Loss of control can cause
personal injury.
Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a “live wire may make exposed
metal parts of the power tool “live” and could give
the operator an electric shock.
Safety Instructions when using long drill bits
•Never operate at higher speed than the maximum
speed rating of the drill bit. At higher speeds, the
bit is likely to bend if allowed to rotate freely without
contacting the workpiece, resulting in personal injury.
Always start drilling at low speed and with the bit
tip in contact with the workpiece. At higher speeds,
the bit is likely to bend if allowed to rotate freely without
contacting the workpiece, resulting in personal injury.
Apply pressure only in direct line with the bit
and do not apply excessive pressure. Bits can
bend causing breakage or loss of control, resulting in
personal injury.
WARNING
To reduce the risk of injury in ap-
plications that produce a consid-
erable amount of dust, use an OSHA compliant
dust extraction solution in accordance with the
solution’s operating instructions.
Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
WARNING
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
lead from lead-based paint
crystalline silica from bricks and cement and other
masonry products, and
arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to


Product specificaties

Merk: Milwaukee
Categorie: Boormachine
Model: M18 Fuel Super Hawg 2809-22

Heb je hulp nodig?

Als je hulp nodig hebt met Milwaukee M18 Fuel Super Hawg 2809-22 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Boormachine Milwaukee

Handleiding Boormachine

Nieuwste handleidingen voor Boormachine

DeWalt

DeWalt DCB126 Handleiding

2 November 2024
Vonroc

Vonroc CD510DC Handleiding

20 Oktober 2024
MSW

MSW -DDM300 Handleiding

16 Oktober 2024
MSW

MSW ACC-B1 Handleiding

16 Oktober 2024
MSW

MSW -DDM260 Handleiding

16 Oktober 2024
MSW

MSW -DDM132 Handleiding

16 Oktober 2024
MSW

MSW -DDM230 Handleiding

16 Oktober 2024
MSW

MSW -DDM205 Handleiding

16 Oktober 2024
MSW

MSW -DDM152 Handleiding

16 Oktober 2024
MSW

MSW -DDM255 Handleiding

16 Oktober 2024