Milwaukee M18 2828-21 Handleiding

Milwaukee Grastrimmer M18 2828-21

Lees hieronder de 📖 handleiding in het Nederlandse voor Milwaukee M18 2828-21 (20 pagina's) in de categorie Grastrimmer. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/20

Cat. No. / No de cat.

2828-20

M18™ BRUSHLESS STRING TRIMMER

TAILLE-BORDURES À LIGNE SANS BALAIS M18™

DESBROZADORA SIN CEPILLO M18™

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

IMPORTANT SAFETY

INSTRUCTIONS

WARNING

Read all safety warnings, instruc-

tions, illustrations and specica-

tions provided with this power tool. Failure to follow

all instructions listed below may result in electric shock,

re and/or serious injury. Save all warnings and in-

structions for future reference.

READ ALL INSTRUCTIONS

BEFORE USE

WORK AREA SAFETY

• Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

• Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

• Keep children and bystanders away while operat-

ing a power tool. Distractions can cause you to lose

control.

• Do not allow to be used as a toy. Close attention

is necessary when used by or near children.

Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar with

the power tool or these instructions to operate

the power tool. Power tools are dangerous in the

hands of untrained users.

• Do not use the tool near anything that is burning or

smoking such as cigarettes, matches, or hot ashes.

•To reduce the risk of health hazards from vapors

or dust, do not use tool near tool toxic, carcino-

genic or other hazardous materials such as as-

bestos, arsenic, barium, beryllium, lead, pesticides

or other health endangering materials.

ELECTRICAL SAFETY

• Do not expose power tools to rain or wet condi-

tions. Do not immerse in water or spray with a

hose. Do not clean with a pressure washer. Water

entering a power tool will increase the risk of electric

shock. Store tool indoors.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the inuence of drugs, alcohol or medication. A

moment of inattention while operating power tools

may result in serious personal injury.

•Always wear eye protection. Use of this tool can

result in foreign objects being thrown into eyes,

which can result in eye damage.

•Wear a face or dust mask when working in dust

situations. Dust particles can harm your lungs.

• Use personal protective equipment. Protective

equipment such as hearing protection, protective

clothing, and non-skid safety shoes used for ap-

propriate conditions will reduce personal injuries.

• Dress properly. Do not wear loose clothing or

jewelry. Keep your hair and clothing away from

moving parts. Loose clothes, jewelry or long hair

can be caught in moving parts.

• Do not overreach. Keep proper footing and bal-

ance at all times. This enables better control of the

power tool in unexpected situations.

• Use the power tool, accessories, etc. in ac-

cordance with these instructions, taking into

account the working conditions and the work

to be performed. Use of the power tool for opera-

tions di󰀨erent from those intended could result in a

hazardous situation.

• Prevent unintentional starting. Ensure the switch

is in the o󰀨-position before connecting to power

source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your nger on

the switch or energizing power tools that have the

switch on invites accidents.

• Do not let familiarity gained from frequent use

of tools allow you to become complacent and

ignore tool safety principles. A careless action can

cause severe injury within a fraction of a second.

POWER TOOL USE AND CARE

• Do not force the power tool. Use the correct

power tool for your application. The correct power

tool will do the job better and safer at the rate for

which it was designed.

• Use tool only as described in this manual. Use

only manufacturer’s recommended attachments.

• Do not use the power tool if the switch does not

turn it on and o󰀨. Any power tool that cannot be

controlled with the switch is dangerous and must be

repaired.

• Disconnect the plug from the power source and/

or remove the battery pack, if detachable, from

the power tool before making any adjustments,

changing accessories, or storing power tools.

Such preventive safety measures reduce the risk of

starting the power tool accidentally.

• Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the

power tool or these instructions to operate the

power tool. Power tools are dangerous in the hands

of untrained users.

• Do not store the power tool on or near to fertilizers

or chemicals.

• Maintain power tools and accessories. Check

for misalignment or binding of moving parts,

breakage of parts and any other condition that

may a󰀨ect the power tool’s operation. If damaged,

have the power tool repaired before use. Many

accidents are caused by poorly maintained power

tools.

• Use the power tool, accessories, etc. in ac-

cordance with these instructions, taking into

account the working conditions and the work

to be performed. Use of the power tool for opera-

tions di󰀨erent from those intended could result in a

hazardous situation.

• Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

BATTERY TOOL USE AND CARE

• Remove the battery pack from the power tool

before making any adjustments, changing ac-

cessories, storing, or any time the power tool is

not in use. Such preventive safety measures reduce

the risk of starting the power tool accidentally.

•Turn o󰀨 power tool before removing battery

pack.

• Do not handle battery pack, tool, or charger

(including charger plug and terminals) with wet

hands.

•Before using the battery pack or charger read

the operator’s manuals, and any labels on the

battery pack, charger and tool.

• Recharge only with the charger specied by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of re when used

with another battery pack.

• Use power tools only with specically designated

battery packs. Use of any other battery packs may

create a risk of injury and re.

• When battery pack is not in use, keep it away

from other metal objects, like paper clips, coins,

keys, nails, screws or other small metal objects,

that can make a connection from one terminal

to another. Shorting the battery terminals together

may cause burns or a re.

• Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact ac-

cidentally occurs, flush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation

or burns.

• Do not use a battery pack or tool that is dam-

aged or modied. Damaged or modied batteries

may exhibit unpredictable behavior resulting in re,

explosion or risk of injury.

• Do not expose a battery pack or tool to re or

excessive temperature. Exposure to re or tem-

perature above 265°F (130°C) may cause explosion.

• Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

range specied in the instructions. Charging

improperly or at temperatures outside the specied

range may damage the battery and increase the risk

of re.

SERVICE

• Have your power tool serviced by a qualied

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

• Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

SPECIFIC SAFETY RULES FOR

STRING TRIMMERS

• Keep bystanders at least 50' away during use.

Objects may be thrown or ricochet in all directions.

•Brace for unexpected movement when contact

is made with a hard object. Loss of control could

result in serious injury.

•Do not use blades, brush cutting wheels,

accessories, or attachment other than those

recommended by MILWAUKEE. Serious injury or

product damage may occur.

• Do not operate the tool without the coupler in

place. The coupler must be secured properly

when trimming. Operating the trimmer without the

coupler will cause serious injury.

• Do not operate the tool without the guard in

place. The guard must be attached properly

when trimming. Operating the trimmer without the

guard will cause serious injury.

• Do not use tool with a damaged trimmer head.

Cracked or broken pieces can be thrown.

•Do not operate the tool without the front handle

in place. The front handle must be attached

properly for use when trimming. Using one hand

could cause loss of control and result in serious injury.

• Carry the trimmer by the front handle. Proper

handling of the trimmer will prevent injury.

•Use both hands when operating the trimmer.

Maintain a rm grip. Using one hand could cause

loss of control and result in serious injury.

• Inspect the area before using the tool. Remove

all debris and hard objects such as rocks, glass,

wire, etc. that can ricochet, be thrown, or otherwise

cause injury or damage during operation.

•Keep face, hands and feet clear of rotating line at

all times. Rotating line can cause severe lacerations.

• Thrown objects may ricochet o󰀨 of hard surfaces,

such as walls, trees, and rocks and cause injury.

When possible, do trimming by hand in closed in

areas.

•When replacing the line, use only .080" or .095"

spiral (2 mm or 2.4 mm) diameter line. Any other

size can degrade performance or cause damage

to the trimmer.

•Use care when trimming around decorative plants

and other obstacles. Rotating line will cut/damage

many materials.

• Always turn o󰀨 the tool between cuts or when

transporting from one location to another. Do

not carry tool with nger on the trigger. Accidental

starting can cause serious personal injury.

• Do not use tool as an edger. Do not tilt tool to

create a right angle to the ground. Keep trimmer

head and line parallel to the ground. Guard cannot

protect against ying debris in this orientation.

• Always use common sense and be cautious when

using tools. It is not possible to anticipate every

situation that could result in a dangerous outcome.

Do not use this tool if you do not understand these

operating instructions or you feel the work is beyond

your capability; contact Milwaukee Tool or a trained

professional for additional information or training.

• Maintain labels and nameplates. These carry

important information. If unreadable or missing,

contact a MILWAUKEE service facility for a free

replacement.

•

WARNING

Some dust created by power sanding,

sawing, grinding, drilling, and other

construction activities contains chemicals known to

cause cancer, birth defects or other reproductive

harm. Some examples of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated

lumber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such

as those dust masks that are specially designed to

lter out microscopic particles.

READ AND SAVE ALL

INSTRUCTIONS FOR

FUTURE USE

Product specificaties

Merk:	Milwaukee
Categorie:	Grastrimmer
Model:	M18 2828-21

Heb je hulp nodig?

Als je hulp nodig hebt met Milwaukee M18 2828-21 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Grastrimmer Milwaukee

Milwaukee M18 Fuel 2725-21HD Handleiding

2 Mei 2023

Milwaukee 2725-20 Handleiding

11 April 2023

Milwaukee M18 2828-21 Handleiding

8 Februari 2023

Milwaukee 2726-20 Handleiding

25 Oktober 2022

Handleiding Grastrimmer

Nieuwste handleidingen voor Grastrimmer

Einhell GC-BC 30/1 AS Handleiding

23 December 2024

Einhell BG-BC 25 Handleiding

23 December 2024

Einhell BG-BC 25/1 Handleiding

23 December 2024

Einhell BG-BC 25 AS Handleiding

23 December 2024

Einhell Royal BMST 24 Handleiding

23 December 2024

Einhell MSB 24 Handleiding

23 December 2024

Einhell BG-BC 30 S Handleiding

23 December 2024

Einhell BG-BC 41 Handleiding

23 December 2024

Qualcast HQ-BC 30 Handleiding

17 December 2024

Turbo-Silent RT 300 Handleiding

16 December 2024