Milwaukee 5342-21 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Milwaukee 5342-21 (32 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/32
HEAVY-DUTY ROTARY HAMMERS AND DEMOLITION HAMMERS
EXTRA ROBUSTES MARTEAUX ROTATIFS ET MARTEAU DE DÉMOLISSEUR
ROTOMARTILLOS Y MARTILLOS PERFORADORES DE
DEMOLICIÓN HEAVY-DUTY
Cat. No.
No de Cat.
Cat. No.
5337-20, 5337-21
5339-20, 5339-21
5340-20, 5340-21
5342-20, 5342-21
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
TO REDUCE THE RISK OF INJURY, USER MUST READ OPERATOR'S MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE LE MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER EL MANUAL DEL OPERADOR.
page 2
page 3
GENERAL SAFETY RULES — FOR ALL POWER TOOLS
WORK AREA SAFETY
ELECTRICAL SAFETY
PERSONAL SAFETY
POWER TOOL USE AND CARE
SERVICE
4. Power tool plugs must match the outlet. Never modify the plug in
any way. Do not use any adapter plugs with earthed (grounded)
power tools. Unmodi ed plugs and matching outlets will reduce risk
of electric shock.
5. Avoid body contact with earthed or grounded surfaces such as
pipes, radiators, ranges and refrigerators. There is an increased risk
of electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet conditions. Water entering
a power tool will increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for carrying, pulling, or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges, or moving parts. Damaged or entangled cords increase the
risk of electric shock.
8. When operating a power tool outdoors, use an extension cord suit-
able for outdoor use. Use of a cord suitable for outdoor use reduces
the risk of electric shock.
WARNING
READ ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in electric shock, re and/or serious injury. The term "power tool" in all of the
warnings listed below refers to your mains-operated (corded) power tool or battery-opearted (cordless) power tool.
SAVE THESE INSTRUCTIONS
16. Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at
the rate for which it was designed.
17. Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be controlled with the switch is dangerous
and must be repaired.
18. Disconnect the plug from the power source and/or the battery pack
from the power tool before making any adjustments, changing ac-
cessories, or storing power tools. Such preventive safety measures
reduce the risk of starting the tool accidentally.
19. Store idle power tools out of the reach of children and do not al-
low persons unfamiliar with the power tools or these instructions
to operate power tools. Power tools are dangerous in the hands of
untrained users.
20. Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the
power tool's operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power
tools.
21. Keep cutting tools sharp and clean. Properly maintained cutting
tools with sharp cutting edges are less likely to bind and are easier to
control.
22. Use the power tool, accessories and tool bits etc., in accordance
with these instructions and in the manner intended for the particu-
lar type of power tool, taking into account the working conditions
and the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous situation.
23. Have your power tool serviced by a quali ed repair person using
only identical replacement parts. This will ensure that the safety of
the power tool is maintained.
1. Keep work area clean and well lit. Cluttered or dark areas invite ac-
cidents.
2. Do not operate power tools in explosive atmospheres, such as
in the presence of ammable liquids, gases, or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
9. Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the in
uence of drugs, alcohol or medication.
A moment
of inattention while operating power tools may result in serious personal
injury.
10. Use safety equipment. Always wear eye protection. Safety equip-
ment such as dust mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal inju-
ries.
11. Avoid accidental starting. Ensure the switch is in the off-position
before plugging in. Carrying tools with your nger on the switch or
plugging in power tools that have the switch on invites accidents.
12. Remove any adjusting key or wrench before turning the power
tool on. A wrench or a key left attached to a rotating part of the power
tool may result in personal injury.
13. Do not overreach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
14. Dress properly. Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from moving parts. Loose clothes,
jewellery, or long hair can be caught in moving parts.
15. If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used.
Use of these devices can reduce dust-related hazards.
1. Hold power tools by insulated gripping surfaces when performing
an operation where the cutting tool may contact hidden wiring or
its own cord. Contact with a “live” wire will make exposed metal parts
of the tool “live” and shock the operator.
2.
Maintain labels and nameplates.
These carry important information.
If unreadable or missing, contact a MILWAUKEE service facility for a
free replacement.
3. WARNING! Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm. Some examples
of these chemicals are:
lead from lead-based paint
crystalline silica from bricks and cement and other masonry products,
and
arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do
this type of work. To reduce your exposure to these chemicals: work
in a well ventilated area, and work with approved safety equipment,
such as those dust masks that are speci cally designed to lter out
microscopic particles.
4. Wear ear protectors. Exposure to noise can cause hearing loss.
5. Use auxiliary handles supplied with the tool. Loss of control can
cause personal injury.
SPECIFIC SAFETY RULES


Product specificaties

Merk: Milwaukee
Categorie: Boormachine
Model: 5342-21

Heb je hulp nodig?

Als je hulp nodig hebt met Milwaukee 5342-21 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Boormachine Milwaukee

Handleiding Boormachine

Nieuwste handleidingen voor Boormachine

DeWalt

DeWalt DCB126 Handleiding

2 November 2024
Vonroc

Vonroc CD510DC Handleiding

20 Oktober 2024
MSW

MSW -DDM300 Handleiding

16 Oktober 2024
MSW

MSW ACC-B1 Handleiding

16 Oktober 2024
MSW

MSW -DDM260 Handleiding

16 Oktober 2024
MSW

MSW -DDM132 Handleiding

16 Oktober 2024
MSW

MSW -DDM230 Handleiding

16 Oktober 2024
MSW

MSW -DDM205 Handleiding

16 Oktober 2024
MSW

MSW -DDM152 Handleiding

16 Oktober 2024
MSW

MSW -DDM255 Handleiding

16 Oktober 2024