Maktec MT814 Handleiding

Maktec Niet gecategoriseerd MT814

Lees hieronder de 📖 handleiding in het Nederlandse voor Maktec MT814 (40 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/40
GB
Hammer Drill Instruction Manual
F
Perceuse à percussion Manuel d’instructions
D
Schlagbohrmaschine Betriebsanleitung
I
Trapano a percussione Istruzioni per l’uso
NL
Hamerboor Gebruiksaanwijzing
E
Rotomartillo
Manual de instrucciones
P
Furadeira de Impacto
Manual de instruções
DK
Borehammer Brugsanvisning
GR Κρουστικ τρυπάνι Οδηγίες χρήσεως
MT814
MT815
2
1 2
3 4
5 6
7
1
2
3
4
56
7
8
9
10
11 12
1
13
14
16
3
ENGLISH (Original instructions)
Explanation of general view
1 Grip base
2 Teeth
3 Side grip (auxiliary handle)
4 Protrusion
5 Loosen
6 Tighten
7 Drill chuck
8 Chuck key
9 Sleeve
10 Ring
11 Side grip
12 Depth gauge
13 Switch trigger
14 Lock button
15 Reversing switch lever
16 Action mode changing lever
SPECIFICATIONS
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
ENE039-1
Intended use
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.
ENF002-1
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
GEA010-1
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future refer-
ence.
GEB003-5
HAMMER DRILL SAFETY WARNINGS
1. Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
2. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
3. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord. Cutting accessory contacting a “live” wire may
make exposed metal parts of the power tool “live”
and could give the operator an electric shock.
4. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
5. Hold the tool firmly with both hands.
6. Keep hands away from rotating parts.
7. Do not leave the tool running. Operate the tool
only when hand-held.
8. Do not touch the bit or the workpiece immedi-
ately after operation; they may be extremely hot
and could burn your skin.
9. Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation and
skin contact. Follow material supplier safety data.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this instruc-
tion manual may cause serious personal injury.
ASSEMBLY
Installing side grip (auxiliary handle) (Fig. 1)
CAUTION:
• Always be sure that the tool is switched off and
unplugged before installing or removing the side grip.
Always use the side grip to ensure operating safety.
Install the side grip so that the teeth on the grip fit in
between the protrusions on the tool barrel. Then tighten
the grip by turning clockwise at the desired position. It
may be swung 360° so as to be secured at any position.
Model MT814 MT815
Capacities
Concrete 16 mm
Wood 30 mm
Steel 13 mm
No load speed (min–1 ) 0 – 3,200
Blows per minute 0 – 48,000
Overall length 296 mm 295 mm
Net weight 2.1 kg 2.0 kg
Safety class a/II

Product specificaties

Merk: Maktec
Categorie: Niet gecategoriseerd
Model: MT814

Heb je hulp nodig?

Als je hulp nodig hebt met Maktec MT814 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Maktec

Maktec

Maktec MT080 Handleiding

30 Januari 2024
Maktec

Maktec MT904 Handleiding

30 Januari 2024
Maktec

Maktec MT905 Handleiding

30 Januari 2024
Maktec

Maktec MT814 Handleiding

30 Januari 2024
Maktec

Maktec MT081 Handleiding

30 Januari 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Inglesina

Inglesina Welcome Pad Handleiding

22 December 2024
Inglesina

Inglesina Front Handleiding

22 December 2024
Inglesina

Inglesina Newborn Winter Muff Handleiding

22 December 2024
Inglesina

Inglesina Stroller Winter Muff Handleiding

22 December 2024
Protector

Protector AS-5030.3 V2 Handleiding

21 December 2024
Sabrent

Sabrent AU-MMCW Handleiding

21 December 2024
Sabrent

Sabrent AU-2X35 Handleiding

21 December 2024
Sabrent

Sabrent CB-RS232 Handleiding

21 December 2024
Owon

Owon 500W Handleiding

21 December 2024
Owon

Owon 300W Handleiding

21 December 2024