La Crosse Technology TX144W Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor La Crosse Technology TX144W (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
Wind Speed Sensor
Features
• Wind speed
• Replaceable wind cups
• Updates every 30 seconds
• Red LED ashes with each transmission
1. Twist battery cover left to remove from sensor.
2. Insert two “C” batteries into the TX141Wv2 sensor
Twist
Left
Power
Wind Cups
Air Vents
Battery cover
Mounting Pole
Mounting Bracket
C
C
Red LED
Model: TX144W
DC: 030817
Replace Wind Cups
1. Loosen the screw on side of cups
2. Remove cups
3. Install new cups
4. Tighten screw on at side of stem
Speciîšżcations
• Wind Speed Range: 0 - 99 mph (0-159 kMh)
• Transmission Range: 330 ft (100 m) RF 433MHz open air
• Batteries: 2-C, IEC, LR14 batteries (not included)
• Battery Life: over 24 months with reputable batteries
• Dimensions: 18.57” H x 7.10” W x 7.10” D
(471.68 x 180.34 x 180.34 mm)
Flat Side Of
Stem Up
Insert and Attach
Flat End up
• For the most accurate wind speed readings, mount the TX144W
sensor as the highest object for 50 feet in all directions.
• Cups should be on the top of the sensor. Mount vertically.
• The maximum wireless transmission range to the wind station is
over 330 feet (100 meters) in open air, not including walls or trees.
1. Insert mounting pole into sensor.
2. Tighten screws
3. Insert bottom of pole into mounting bracket
4. Tighten knob to secure
5. Use screws through the bottom of the mounting bracket to attach.
6. The sensor can be mounted from the bottom or side.
Alternatively:
1. Insert your own mounting pole into the sensor.
2. Tighten screws
3. Mounting bracket would not be used.
Note: Do not attempt to insert a pole into the hollow back of the
mounting bracket.
Position Wind Sensor
Warranty and Support
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this
product relating to manufacturing defects in materials & workmanship.
Before returning a product, please contact our friendly customer support or visit our online help:
Phone: 1-608-782-1610
Online: www.lacrossetechnology.com/support/
View full warranty details online at:
www.lacrossetechnology.com/warranty_info.pdf
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any other antenna or transmitter.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes or modiîšżcations
to this
equipment. Such changes or modiîšżcations could void the user authority to operate the equipment.
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for
this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be
co-located or operating in conjunction with any other antenna or transmitter
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using
electronic, mechanical or chemical process without the written permission of the publisher. This booklet may contain
errors or misprints. The information it contains is regularly checked and corrections are included in subsequent edi-
tions. We disclaim any responsibility for any technical error or printing error, or their consequences.
All trademarks and patents are recognized.


Product specificaties

Merk: La Crosse Technology
Categorie: Niet gecategoriseerd
Model: TX144W

Heb je hulp nodig?

Als je hulp nodig hebt met La Crosse Technology TX144W stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd La Crosse Technology

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd