La Crosse Technology LTV-TH2 Handleiding

La Crosse Technology Niet gecategoriseerd LTV-TH2

Lees hieronder de 📖 handleiding in het Nederlandse voor La Crosse Technology LTV-TH2 (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/3
Model: LTV-TH2
DC: 083017
Thermo-hygro Sensor
Power & Mounting
LED Light
AA
+-
AA
+-
Battery Cover
Hole for
mounting
TX F/C
∙ Press TX to send a signal
∙ Press F/C to select Fahrenheit
or Celsius display on sensor.
1. Install 2-AA batteries according to polarity and replace battery cover. The blue LED light will flash
when transmitting.
Mounting:
1. Use the hole at the top to hang your sensor from the back using a nail. Or, insert one mounting screw
through the front of your sensor.
2. Mount your sensor on a north-facing wall or in any shaded area. Under an eave or deck rail is
preferred to avoid inaccurate readings from the sun.
3. The maximum wireless transmission range to the weather station is up to 400 feet (121 meters) in open
air, not including walls or floors.
4. Be sure your sensor is mounted vertically, to allow moisture to drain out properly.
Note: Watch sensor mounting video: http://bit.ly/TH_SensorMounting
Sensor ID
Standalone station:
Your sensor has a bar code and ID number. This ID number locks your sensor into
your station. Follow the instructions in your station manual to delete the sensor ID
for sensor replacement.
La Crosse View™ compatible system:
The sensor ID and bar code are recognized by the La Crosse View™ app if you are using
this sensor as an add-on to your existing La Crosse View™ compatible system.
To add this sensor to your existing La Crosse View™ compatible system:
1. Open your La Crosse View app to add sensors.™
2. From Main Menu - select “Devices” under “Add/Edit”
3. On Edit Devices page - select “ADD DEVICE”
4. Scan Device ID - Scan the bar code on your sensor or press inside the Device ID search box to enter
your code manually. Once entered, select “Search”.
5. On Confirm Device page - Confirm the sensor image and model number are correct and select “YES”
6. On Enter Device and Location Names page - enter Device Name and select a location or enter
a Location Name for your sensor. Select “DONE”.
Note: This sensor cannot connect to the La Crosse View app without a La Crosse View compatible
station. Station’s that are La Crosse View compatible have built-in Wi-Fi capabilities that send your
sensor’s data to the La Crosse View app. For more information about our new connected stations visit:
http://www.lacrossetechnology.com/products/connected
JOIN THE CONVERSATION
Follow us on our social media outlets for the latest promotions, product support, and awesome
giveaways.
Let’s Be Social!
If you have ideas for features or support solutions you’d like to see us make, please let us know! We tru-
ly want to make owning a La Crosse Technology product not only a practical experience, but also a fun
one. So email us at: store@lacrossetechnology.com
Help Us, Help You!
Warranty and Support
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to
manufacturing defects in materials & workmanship. Before returning a product, please contact our friendly customer support
with questions or visit our online help:
Phone: 1-608-782-1610
Online Product Support and Registration: www.lacrossetechnology.com/support
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any other antenna or transmitter.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes or modifications to this
equipment. Such changes or modifications could void the user authority to operate the equipment.
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this
transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located
or operating in conjunction with any other antenna or transmitter
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using
electronic, mechanical or chemical process without the written permission of the publisher. This booklet may contain errors or
misprints. The information it contains is regularly checked and corrections are included in subsequent editions. We disclaim
any responsibility for any technical error or printing error, or their consequences.
All trademarks and patents are recognized.
Specifications
• Temperature Range: -40°F to 140°F (-40°C to 60°C)
• Humidity Range: 10% RH to 99%RH
• Transmission Range: Up to 400 feet (121 meters) in open air, RF 915 MHz
• Batteries: 2-AA, IEC, LR6 batteries (not included)
• Battery Life: over 24 months with reputable batteries
• Dimensions: 1.97” L x 0.75” W x 5.73” H (5.0cm L x 1.91cm W x 14.55cm H)

Product specificaties

Merk: La Crosse Technology
Categorie: Niet gecategoriseerd
Model: LTV-TH2

Heb je hulp nodig?

Als je hulp nodig hebt met La Crosse Technology LTV-TH2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd La Crosse Technology

La Crosse Technology

La Crosse Technology TX141V4 Handleiding

5 Januari 2024
La Crosse Technology

La Crosse Technology 724-1409 Handleiding

6 December 2023
La Crosse Technology

La Crosse Technology TX145W Handleiding

9 Juli 2023
La Crosse Technology

La Crosse Technology LTV-THP1-T1 Handleiding

7 Juli 2023
La Crosse Technology

La Crosse Technology 616A-1908 Handleiding

17 Juni 2023
La Crosse Technology

La Crosse Technology 308-1415FCTV2 Handleiding

15 Juni 2023
La Crosse Technology

La Crosse Technology WS-6020U-IT Handleiding

14 Juni 2023
La Crosse Technology

La Crosse Technology WS-9016U Handleiding

9 Juni 2023
La Crosse Technology

La Crosse Technology TX151 Handleiding

9 Juni 2023
La Crosse Technology

La Crosse Technology LTV-POOL Handleiding

5 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Gourmetmaxx

Gourmetmaxx 03863 Handleiding

24 December 2024
Vello

Vello PGS-P Handleiding

24 December 2024
Venom

Venom Quad Charging Station VS4796 Handleiding

24 December 2024
Nec

Nec IPJ2000CM Handleiding

24 December 2024
Monogram

Monogram ZKPN Handleiding

24 December 2024
Philips

Philips Quick Clean Pot QCP10 Handleiding

24 December 2024
Philips

Philips Senseo HD7002 Handleiding

24 December 2024
D-Link

D-Link DUB-C2 Handleiding

24 December 2024
Nec

Nec MultiPresenter Stick DS1-MP10RX1 Handleiding

24 December 2024
Nec

Nec DS1-TM01 Handleiding

24 December 2024